QB/T 2441.1-2007 剪切钳 斜嘴钳
本标准规定了斜嘴钳的分类、要求、试验方法、检验规则和包装、标志、运输、贮存。 本标准适用于斜嘴钳。本标准的型式仅是示例，并不影响对产品的设计
Nippers- Diagonal cutting nippers
QB/T 2441.1-1999 剪切钳 斜嘴钳
本标准规定了斜嘴钳的产品分类、技术要求、试验方法。 本标准适用于斜嘴钳。当产品有特殊要求时，可不受本标准限制
Diagonal nose pliers
NF E73-105*NF ISO 5749:2004 夹扭钳和剪切钳 斜嘴钳 尺寸和试验值
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
ISO 5749:2004 夹扭钳和剪切钳.斜嘴钳.尺寸和试验值
This International Standard specifies the principal dimensions of diagonal cutting nippers and the test values for the nippers in order to verify
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
ISO 5749:1988 夹扭钳和剪切钳 斜嘴钳 尺寸和试验值
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
BS ISO 5749:2004 夹扭钳和剪切钳.斜嘴钳.尺寸和试验值
This International Standard specifies the principal dimensions of diagonal cutting nippers and the test values for the nippers in order to verify
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
AS/NZS 4056.8:1992 夹扭钳和剪切钳．斜嘴钳．尺寸和试验值
Specifies the principal dimensions and test values for diagonal cutting nippers for general use. This Standard is identical with and reproduced from
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
NF E73-106:1988 手钳和剪钳.旁剪、中心剪丝和斜嘴钳
Pliers and nippers. Lever assisted side cutting, end cutting and diagonal cutting nippers.
ASME B107.11M-1993 斜嘴剪丝钳和中心剪丝钳
Pliers, diagonal cutting, and nippers, end cutting
DIN ISO 5749:2006 夹扭钳和剪切钳.斜剪切钳.尺寸和试验值
This International Standard specifies the principal dimensions of diagonal cutting nippers and the test values for the nippers in order to verify
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values (ISO 5749:2004) English version of DIN ISO 5749:2006-09
QB/T 2442.3-2007 夹扭剪切钳 带刃尖嘴钳
本标准规定了带刃尖嘴钳的分类、要求、试验方法、检验规则和包装、标志、运输、贮存。 本标准适用于带刃尖嘴钳。本标准的型式仅是示例，并不影响对产品的设计
Pliers and nippers-Snipe nose pliers with side cutter
ISO 5747:1984 夹扭钳和剪扭钳.杠杆辅助的侧剪切钳,端剪切钳和斜口钳.尺寸
Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions
CNS 1133-2008 夹钳与剪钳－对口斜角剪钳(斜口钳)
Pliers and nippers - Diagonal cutting nippers
NF E73-106*NF ISO 5747:2015 夹扭钳和剪切钳 杠杆辅助的侧剪钳、端剪切钳和斜口钳 尺寸和试验值
Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
ISO 5747:1995 夹扭钳和剪切钳 杠杆辅助的侧剪钳、端剪切钳和斜口钳 尺寸和试验值
Specifies the principal dimensions of lever assisted side cutting pliers and end and diagonal cutting nippers, as well as the test values
Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
QB/T 2441.1-2007 剪切钳 斜嘴钳
本标准规定了斜嘴钳的分类、要求、试验方法、检验规则和包装、标志、运输、贮存。 本标准适用于斜嘴钳。本标准的型式仅是示例，并不影响对产品的设计
Nippers- Diagonal cutting nippers
QB/T 2441.1-1999 剪切钳 斜嘴钳
本标准规定了斜嘴钳的产品分类、技术要求、试验方法。 本标准适用于斜嘴钳。当产品有特殊要求时，可不受本标准限制
Diagonal nose pliers
NF E73-105*NF ISO 5749:2004 夹扭钳和剪切钳 斜嘴钳 尺寸和试验值
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
ISO 5749:2004 夹扭钳和剪切钳.斜嘴钳.尺寸和试验值
This International Standard specifies the principal dimensions of diagonal cutting nippers and the test values for the nippers in order to verify
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
ISO 5749:1988 夹扭钳和剪切钳 斜嘴钳 尺寸和试验值
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
BS ISO 5749:2004 夹扭钳和剪切钳.斜嘴钳.尺寸和试验值
This International Standard specifies the principal dimensions of diagonal cutting nippers and the test values for the nippers in order to verify
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
AS/NZS 4056.8:1992 夹扭钳和剪切钳．斜嘴钳．尺寸和试验值
Specifies the principal dimensions and test values for diagonal cutting nippers for general use. This Standard is identical with and reproduced from
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
NF E73-106:1988 手钳和剪钳.旁剪、中心剪丝和斜嘴钳
Pliers and nippers. Lever assisted side cutting, end cutting and diagonal cutting nippers.
ASME B107.11M-1993 斜嘴剪丝钳和中心剪丝钳
Pliers, diagonal cutting, and nippers, end cutting
DIN ISO 5749:2006 夹扭钳和剪切钳.斜剪切钳.尺寸和试验值
This International Standard specifies the principal dimensions of diagonal cutting nippers and the test values for the nippers in order to verify
Pliers and nippers - Diagonal cutting nippers - Dimensions and test values (ISO 5749:2004) English version of DIN ISO 5749:2006-09
QB/T 2442.3-2007 夹扭剪切钳 带刃尖嘴钳
本标准规定了带刃尖嘴钳的分类、要求、试验方法、检验规则和包装、标志、运输、贮存。 本标准适用于带刃尖嘴钳。本标准的型式仅是示例，并不影响对产品的设计
Pliers and nippers-Snipe nose pliers with side cutter
ISO 5747:1984 夹扭钳和剪扭钳.杠杆辅助的侧剪切钳,端剪切钳和斜口钳.尺寸
Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions
CNS 1133-2008 夹钳与剪钳－对口斜角剪钳(斜口钳)
Pliers and nippers - Diagonal cutting nippers
NF E73-106*NF ISO 5747:2015 夹扭钳和剪切钳 杠杆辅助的侧剪钳、端剪切钳和斜口钳 尺寸和试验值
Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
ISO 5747:1995 夹扭钳和剪切钳 杠杆辅助的侧剪钳、端剪切钳和斜口钳 尺寸和试验值
Specifies the principal dimensions of lever assisted side cutting pliers and end and diagonal cutting nippers, as well as the test values
Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
编辑：北检院编辑部
