封闭型沉头抽芯铆钉检测

KS B ISO 15974:2008 封闭型沉头抽芯铆钉

이 표준은 알루미늄 합금 몸체(AIA)와 강 맨드릴(St)로 되어 있고, 공칭 지름 3.2

Closed end blind rivets with break pull mandrel and countersunk head-AIA/St

GB/T 12616-1990 封闭型沉头抽芯铆钉

本标准规定了公称直径d=3～6mm的封闭型沉头抽芯铆钉

120 deg flush head break mandrel closed end blind rivets

GB/T 12616.1-2004 封闭型沉头抽芯铆钉 11级

本部分规定了钉体直径d=3.2～6.4mm，钉体材料为铝合金（AlA）、钉芯材料为钢（St）、性能等级为11级的封闭型沉头抽芯铆钉的机械特性和应用数据

Closed end blind rivets with break pull mandrel and countersunk head-Property class 11

ISO 15974:2000 封闭型沉头抽芯盲铆钉.AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull

Closed end blind rivets with break pull mandrel and countersunk head - AIA/St

EN ISO 15974:2000 封闭型沉头抽芯盲铆钉.AIA/St ISO 15974-2000

Closed End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/St ISO 15974: 2000

SANS 1700-18-5:2004 紧固件．第18部分：铆钉．第5节：封闭型沉头抽芯盲铆钉．AIA/St

Specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and countersunk head

Fasteners Part 18: Rivets Section 5: Closed end blind rivets with break pull mandrel and countersunk head - AIA/St

GB/T 12615-1990 封闭型扁圆头抽芯铆钉

本标准规定了公称直径d=3～6mm的封闭型扁圆头抽芯铆钉

Mushroom head break mandrel closed end blind rivets

KS B ISO 15973:2008 封闭型平圆头抽芯铆钉

이 표준은 알루미늄 합금 몸체(AIA)와 강 맨드릴(St)로 되어 있고, 공칭 지름 3.2

Closed end blind rivets with break pull mandrel and protruding head－AIA/St

GB/T 12615.4-2004 封闭型平圆头抽芯铆钉 51级

本部分规定了钉体直径d=3.2～6.4mm、钉体材料为奥氏体不锈钢（A2）、钉芯材料为不锈钢（SSt）、性能等级为51级的封闭型平圆头抽芯铆钉的机械特性和应用数据

Closed end blind rivets with break pull mandrel and protruding head-property class 51

GB/T 12615.1-2004 封闭型平圆头抽芯铆钉 11级

本部分规定了钉体直径d=3.2～6.4mm、钉体材料为铝（AlA）合金、钉芯材料为钢（St）、性能等级为11级的封闭型平圆头抽芯铆钉的机械特性和应用数据

Closed end blind rivets with break pull mandrel and protruding head-property class 11

GB/T 12615.2-2004 封闭型平圆头抽芯铆钉 30级

本部分规定了钉体直径d=3.2～6.4mm、钉体材料为钢（St）、钉芯材料为钢（St）、性能等级为30级的封闭型平圆头抽芯铆钉的机械特性和应用数据

Closed end blind rivets with break pull mandrel and protruding head-property class 30

GB/T 12615.3-2004 封闭型平圆头抽芯铆钉 06级

本部分规定了钉体直径d=3.2～6.4mm、钉体材料为铝（Al）、钉芯材料为铝合金（AlA）、性能等级为06级的封闭型平圆头抽芯铆钉的机械特性和应用数据

Closed end blind rivets with break pull mandrel and protruding head-property class 06

SAE J1200-2013 抽芯型沉头铆钉

This SAE Standard establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use

Blind Rivets Break Mandrel Type

DIN EN ISO 15976:2003 封闭型盘头抽芯盲铆钉.St/St

The document specifies the characteristics of blind rivets with break pull mandrel and protruding head with the material combination steel/steel

Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002); German version EN ISO 15976:2002

DIN EN ISO 15975:2003 封闭型盘头抽芯盲铆钉.AI/AIA

Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002); German version EN ISO 15975:2002

KS B ISO 15974:2008 封闭型沉头抽芯铆钉

이 표준은 알루미늄 합금 몸체(AIA)와 강 맨드릴(St)로 되어 있고, 공칭 지름 3.2

Closed end blind rivets with break pull mandrel and countersunk head-AIA/St

GB/T 12616-1990 封闭型沉头抽芯铆钉

本标准规定了公称直径d=3～6mm的封闭型沉头抽芯铆钉

120 deg flush head break mandrel closed end blind rivets

GB/T 12616.1-2004 封闭型沉头抽芯铆钉 11级

本部分规定了钉体直径d=3.2～6.4mm，钉体材料为铝合金（AlA）、钉芯材料为钢（St）、性能等级为11级的封闭型沉头抽芯铆钉的机械特性和应用数据

Closed end blind rivets with break pull mandrel and countersunk head-Property class 11

ISO 15974:2000 封闭型沉头抽芯盲铆钉.AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull

Closed end blind rivets with break pull mandrel and countersunk head - AIA/St

EN ISO 15974:2000 封闭型沉头抽芯盲铆钉.AIA/St ISO 15974-2000

Closed End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/St ISO 15974: 2000

SANS 1700-18-5:2004 紧固件．第18部分：铆钉．第5节：封闭型沉头抽芯盲铆钉．AIA/St

Specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and countersunk head

Fasteners Part 18: Rivets Section 5: Closed end blind rivets with break pull mandrel and countersunk head - AIA/St

GB/T 12615-1990 封闭型扁圆头抽芯铆钉

本标准规定了公称直径d=3～6mm的封闭型扁圆头抽芯铆钉

Mushroom head break mandrel closed end blind rivets

KS B ISO 15973:2008 封闭型平圆头抽芯铆钉

이 표준은 알루미늄 합금 몸체(AIA)와 강 맨드릴(St)로 되어 있고, 공칭 지름 3.2

Closed end blind rivets with break pull mandrel and protruding head－AIA/St

GB/T 12615.4-2004 封闭型平圆头抽芯铆钉 51级

本部分规定了钉体直径d=3.2～6.4mm、钉体材料为奥氏体不锈钢（A2）、钉芯材料为不锈钢（SSt）、性能等级为51级的封闭型平圆头抽芯铆钉的机械特性和应用数据

Closed end blind rivets with break pull mandrel and protruding head-property class 51

GB/T 12615.1-2004 封闭型平圆头抽芯铆钉 11级

本部分规定了钉体直径d=3.2～6.4mm、钉体材料为铝（AlA）合金、钉芯材料为钢（St）、性能等级为11级的封闭型平圆头抽芯铆钉的机械特性和应用数据

Closed end blind rivets with break pull mandrel and protruding head-property class 11

GB/T 12615.2-2004 封闭型平圆头抽芯铆钉 30级

本部分规定了钉体直径d=3.2～6.4mm、钉体材料为钢（St）、钉芯材料为钢（St）、性能等级为30级的封闭型平圆头抽芯铆钉的机械特性和应用数据

Closed end blind rivets with break pull mandrel and protruding head-property class 30

GB/T 12615.3-2004 封闭型平圆头抽芯铆钉 06级

本部分规定了钉体直径d=3.2～6.4mm、钉体材料为铝（Al）、钉芯材料为铝合金（AlA）、性能等级为06级的封闭型平圆头抽芯铆钉的机械特性和应用数据

Closed end blind rivets with break pull mandrel and protruding head-property class 06

SAE J1200-2013 抽芯型沉头铆钉

This SAE Standard establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use

Blind Rivets Break Mandrel Type

DIN EN ISO 15976:2003 封闭型盘头抽芯盲铆钉.St/St

The document specifies the characteristics of blind rivets with break pull mandrel and protruding head with the material combination steel/steel

Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002); German version EN ISO 15976:2002

DIN EN ISO 15975:2003 封闭型盘头抽芯盲铆钉.AI/AIA

Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002); German version EN ISO 15975:2002