金属锻、铸件检测

SL 576-2012 水工金属结构铸锻件通用技术条件

本标准规定了水工金属结构设备常用的铸钢件、灰铸铁件和钢锻件(统称铸锻件)的技术要求、试验方法、检验规则及标志、包装、运输与贮存要求等。本标准适用于水工金属结构设备常用铸钢件、灰铸铁件和钢锻件(以下简称锻件)的设计、制造、验收等

Specifications for castings and forgings of hydraulic steel structure

MNC 5-1985 金属材料．半成品．铸件．锻件．烧结部件．铁合金．瑞典标准概述列表

Metallic materials - Semi-manufactured products. Castings. Forgings. Sintered components. Ferroalloys - List of Swedish standards summaries

MNC 5 E-1985 金属材料．半成品．铸件．锻件．烧结部件．铁合金．瑞典标准概述列表

Metallic materials — Semi-manufactured products. Castings. Forgings. Sintered components. Ferroalloys — List of Swedish standards summaries

ASTM E55-91(2005 测定化学成分用锻制有色金属及其合金铸件的取样

1.1 This practice covers the sampling, for the determination of chemical composition (Note 1), of nonferrous metals and alloys that have been

Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

ASTM E55-11 测定化学成分用锻制有色金属及其合金铸件取样的标准操作规程

1.1 This practice covers the sampling, for the determination of chemical composition (Note 1), of nonferrous metals and alloys

Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

AS 4738.1:2007 金属铸件．砂型铸

Specifies the general technical delivery requirements for iron and steel castings including the requirements for the preparation of samples and test

Metal castings - Ferrous sand moulded

AS 4738.1:2007/Amdt 1:2008 金属铸件 黑色金属砂模

CB 862.1-1988 有色金属锻件技术条件 铝合金模锻件和自由锻件

本标准规定了锻件分类、技术要求、试验方法和验收规则。 本标准适用于军品用铝合金模锻件和自由锻件，民品亦应参照使用

Technical conditions for non-ferrous metal forgings Aluminum alloy die forgings and free forgings

CB 862.2-1988 有色金属锻件技术条件 铜合金模锻件和自由锻件

本标准规定了锻件分类、技术要求、试验方法和验收规则。 本标准适用于军品用铜合金模锻件和自由锻件，民品亦应参照使用

Technical conditions for non-ferrous metal forgings Copper alloy die forgings and free forgings

ARMY MIL-I-13857 B NOTICE 2-1998 金属铸件注入

MIL-I-13857B7 dated 3 August 1983, AMENDMENT 1, dated 17 February 1984, and Validation Notice 1,dated 1 August 1989, are inactive for new design

IMPREGNATION OF METAL CASTINGS

ARMY MIL-I-13857 B VALID NOTICE 1-1989 金属铸件注入

MIL-I-l3857B, dated 3 August 1983, and Amendment 1 dated 17 February 1984, have been reviewed and determined to be vabid for use in acquisition

IMPREGNATION OF METAL CASTINGS

ARMY MIL-I-13857 B (1)-1984 金属铸件注入

Delete from paragraph 4.4.4.5 atline 4: "Diffusion rate in cubic feet per square inch per hour =i

IMPREGNATION OF METAL CASTINGS

ARMY MIL-I-13857 B-1983 金属铸件注入

This specification covers the requirements for the impregnation of castings which may contain micropores but not visible blow holes or other major def

IMPREGNATION OF METAL CASTINGS

DIN EN 1371-1:1997 铸造.渗液探伤检验.第1部分:砂型铸件.重力金属铸件.低压金属铸件

Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings; German version EN 1371-1:1997

EN 1371-1:2011 铸造.渗液探伤检验.第1部分:砂型铸件.重力金属铸件.低压金属铸件

This European Standard specifies a liquid penetrant testing method for castings produced in conventional sand moulds, by gravity and low-pressure die

Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings

SL 576-2012 水工金属结构铸锻件通用技术条件

本标准规定了水工金属结构设备常用的铸钢件、灰铸铁件和钢锻件(统称铸锻件)的技术要求、试验方法、检验规则及标志、包装、运输与贮存要求等。本标准适用于水工金属结构设备常用铸钢件、灰铸铁件和钢锻件(以下简称锻件)的设计、制造、验收等

Specifications for castings and forgings of hydraulic steel structure

MNC 5-1985 金属材料．半成品．铸件．锻件．烧结部件．铁合金．瑞典标准概述列表

Metallic materials - Semi-manufactured products. Castings. Forgings. Sintered components. Ferroalloys - List of Swedish standards summaries

MNC 5 E-1985 金属材料．半成品．铸件．锻件．烧结部件．铁合金．瑞典标准概述列表

Metallic materials — Semi-manufactured products. Castings. Forgings. Sintered components. Ferroalloys — List of Swedish standards summaries

ASTM E55-91(2005 测定化学成分用锻制有色金属及其合金铸件的取样

1.1 This practice covers the sampling, for the determination of chemical composition (Note 1), of nonferrous metals and alloys that have been

Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

ASTM E55-11 测定化学成分用锻制有色金属及其合金铸件取样的标准操作规程

1.1 This practice covers the sampling, for the determination of chemical composition (Note 1), of nonferrous metals and alloys

Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

AS 4738.1:2007 金属铸件．砂型铸

Specifies the general technical delivery requirements for iron and steel castings including the requirements for the preparation of samples and test

Metal castings - Ferrous sand moulded

AS 4738.1:2007/Amdt 1:2008 金属铸件 黑色金属砂模

CB 862.1-1988 有色金属锻件技术条件 铝合金模锻件和自由锻件

本标准规定了锻件分类、技术要求、试验方法和验收规则。 本标准适用于军品用铝合金模锻件和自由锻件，民品亦应参照使用

Technical conditions for non-ferrous metal forgings Aluminum alloy die forgings and free forgings

CB 862.2-1988 有色金属锻件技术条件 铜合金模锻件和自由锻件

本标准规定了锻件分类、技术要求、试验方法和验收规则。 本标准适用于军品用铜合金模锻件和自由锻件，民品亦应参照使用

Technical conditions for non-ferrous metal forgings Copper alloy die forgings and free forgings

ARMY MIL-I-13857 B NOTICE 2-1998 金属铸件注入

MIL-I-13857B7 dated 3 August 1983, AMENDMENT 1, dated 17 February 1984, and Validation Notice 1,dated 1 August 1989, are inactive for new design

IMPREGNATION OF METAL CASTINGS

ARMY MIL-I-13857 B VALID NOTICE 1-1989 金属铸件注入

MIL-I-l3857B, dated 3 August 1983, and Amendment 1 dated 17 February 1984, have been reviewed and determined to be vabid for use in acquisition

IMPREGNATION OF METAL CASTINGS

ARMY MIL-I-13857 B (1)-1984 金属铸件注入

Delete from paragraph 4.4.4.5 atline 4: "Diffusion rate in cubic feet per square inch per hour =i

IMPREGNATION OF METAL CASTINGS

ARMY MIL-I-13857 B-1983 金属铸件注入

This specification covers the requirements for the impregnation of castings which may contain micropores but not visible blow holes or other major def

IMPREGNATION OF METAL CASTINGS

DIN EN 1371-1:1997 铸造.渗液探伤检验.第1部分:砂型铸件.重力金属铸件.低压金属铸件

Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings; German version EN 1371-1:1997

EN 1371-1:2011 铸造.渗液探伤检验.第1部分:砂型铸件.重力金属铸件.低压金属铸件

This European Standard specifies a liquid penetrant testing method for castings produced in conventional sand moulds, by gravity and low-pressure die

Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings