挤出铝型材及板材表面的有机涂层检测

BS 6496:1984 施加并焙固于铝合金的挤压材、板材和预成型材(外部建筑用)的粉末有机涂层和带有粉末有机涂层的铝合金挤压材、板材和预成型材的精饰规范

Requirements for coatings before and after their application. Also specifies the pretreatment of the aluminium alloy. (See also BS 4842 and BS 6497

Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated wi

AAMA 2603-2017 铝型材和面板上有色有机涂层的自愿规范、性能要求和测试程序（带卷材涂层附录）

This specification describes test procedures and performance requirements for pigmented organic coatings applied to aluminum extrusions and panels

Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels(with Coil Coating Appendix)

AAMA 2603-2015 铝型材和面板上有色有机涂层的自愿规范、性能要求和测试程序（带卷材涂层附录）

This specification describes test procedures and performance requirements for pigmented organic coatings applied to aluminum extrusions and panels

Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels(with Coil Coating Appendix)

INTERN CEMS A-6 PART III-2008 低碳钢材,扁平材及结构型材.第3部分.有机涂层板带材

Low Carbon Steel, Flat Rolled and Structural Shapes - Part III. ORGANIC COATED SHEET AND STRIP

BS 4842:1984 凃用于外部建筑的铝合金挤压件、薄板材和预成型件上的液态有机涂层和液态有机涂层的规范

Requirements for coatings before and after their application. Also specifies the pre-treatment of the aluminium alloy. (See also BS 6496

Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid or

NF A50-452:1984 铝和铝合金.有涂层的带材和薄板材.特性

Aluminium and aluminium alloys. Coil coating strip and sheet. Characteristics.

YS/T 431-2009 铝及铝合金彩色涂层板、带材

本标准规定了铝及铝合金彩色涂层板、带材的要求、试验方法、检验规则、标志、包装、运输、贮存及合同(或订货单)内容。 本标准适用于卷材辊涂涂层线生产的、供建筑、家用电器、交通运输等行业用的铝及铝合金彩色涂层板、带材。 本标准不适用于天花吊顶用铝及铝合金涂层产品

Aluminium and aluminium alloys.Coil coated sheet and strip

JG/T 133-2000 建筑用铝型材、铝板氟碳涂层

本标准规定了建筑铝型材、铝板氟碳涂层的技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于氟碳喷涂工艺的建筑用铝型材、铝板氟碳涂层

Fluorocarbon coatings on architectural aluminum extrusions and panels

SAE AMS-QQ-A-200/5A-2007 铝合金5086棒材,杆材,型材,管材,以及线材,挤出物

This specification covers the specific requirements for aluminum alloy 5086 bar, rod, shapes, tube, and wire produced by extrusion

Aluminum Alloy 5086, Bar, Rod, Shapes, Tube, and Wire, Extruded

SAE AMS-QQ-A-200/7B-2007 铝合金5456条,棒,型材,管材,以及线材,挤出物

This specification covers the specific requirements for aluminum alloy 5456 bar, rod, shapes, tube, and wire produced by extrusion

Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, and Wire, Extruded

SAE AMS-QQ-A-200/2B-2014 铝合金2014,棒,杆,型材,管材,以及线材,挤出物

This specification covers the specific requirements for aluminum alloy 2014 bar, rod, shapes, tube, and wire produced by extrusion

Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and Wire, Extruded

YS/T 431-2000 铝及铝合金彩色涂层板、带材

Aluminum and aluminum alloys.Coil coated sheet and strip

BS EN 755-2:1997 铝和铝合金.挤出杆材/棒材、管材和型材.机械性能

This Part of EN 755 specifies the mechanical property limits applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile. Temper

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Mechanical properties

BS ISO 28340:2013 铝表面联合涂层.铝表面阳极氧化涂层和电泳有机涂层的联合涂层通用规格

Combined coatings on aluminium. General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium

SANS 1578:2006 建筑铝型材涂层用耐久有机粉体

Specifies the characteristics of durable powders that are intended to be applied as organic coatings to aluminium alloy extrusions, sheet and welded

Durable organic powders for coating of external architectural aluminium

BS 6496:1984 施加并焙固于铝合金的挤压材、板材和预成型材(外部建筑用)的粉末有机涂层和带有粉末有机涂层的铝合金挤压材、板材和预成型材的精饰规范

Requirements for coatings before and after their application. Also specifies the pretreatment of the aluminium alloy. (See also BS 4842 and BS 6497

Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated wi

AAMA 2603-2017 铝型材和面板上有色有机涂层的自愿规范、性能要求和测试程序（带卷材涂层附录）

This specification describes test procedures and performance requirements for pigmented organic coatings applied to aluminum extrusions and panels

Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels(with Coil Coating Appendix)

AAMA 2603-2015 铝型材和面板上有色有机涂层的自愿规范、性能要求和测试程序（带卷材涂层附录）

This specification describes test procedures and performance requirements for pigmented organic coatings applied to aluminum extrusions and panels

Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels(with Coil Coating Appendix)

INTERN CEMS A-6 PART III-2008 低碳钢材,扁平材及结构型材.第3部分.有机涂层板带材

Low Carbon Steel, Flat Rolled and Structural Shapes - Part III. ORGANIC COATED SHEET AND STRIP

BS 4842:1984 凃用于外部建筑的铝合金挤压件、薄板材和预成型件上的液态有机涂层和液态有机涂层的规范

Requirements for coatings before and after their application. Also specifies the pre-treatment of the aluminium alloy. (See also BS 6496

Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid or

NF A50-452:1984 铝和铝合金.有涂层的带材和薄板材.特性

Aluminium and aluminium alloys. Coil coating strip and sheet. Characteristics.

YS/T 431-2009 铝及铝合金彩色涂层板、带材

本标准规定了铝及铝合金彩色涂层板、带材的要求、试验方法、检验规则、标志、包装、运输、贮存及合同(或订货单)内容。 本标准适用于卷材辊涂涂层线生产的、供建筑、家用电器、交通运输等行业用的铝及铝合金彩色涂层板、带材。 本标准不适用于天花吊顶用铝及铝合金涂层产品

Aluminium and aluminium alloys.Coil coated sheet and strip

JG/T 133-2000 建筑用铝型材、铝板氟碳涂层

本标准规定了建筑铝型材、铝板氟碳涂层的技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于氟碳喷涂工艺的建筑用铝型材、铝板氟碳涂层

Fluorocarbon coatings on architectural aluminum extrusions and panels

SAE AMS-QQ-A-200/5A-2007 铝合金5086棒材,杆材,型材,管材,以及线材,挤出物

This specification covers the specific requirements for aluminum alloy 5086 bar, rod, shapes, tube, and wire produced by extrusion

Aluminum Alloy 5086, Bar, Rod, Shapes, Tube, and Wire, Extruded

SAE AMS-QQ-A-200/7B-2007 铝合金5456条,棒,型材,管材,以及线材,挤出物

This specification covers the specific requirements for aluminum alloy 5456 bar, rod, shapes, tube, and wire produced by extrusion

Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, and Wire, Extruded

SAE AMS-QQ-A-200/2B-2014 铝合金2014,棒,杆,型材,管材,以及线材,挤出物

This specification covers the specific requirements for aluminum alloy 2014 bar, rod, shapes, tube, and wire produced by extrusion

Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and Wire, Extruded

YS/T 431-2000 铝及铝合金彩色涂层板、带材

Aluminum and aluminum alloys.Coil coated sheet and strip

BS EN 755-2:1997 铝和铝合金.挤出杆材/棒材、管材和型材.机械性能

This Part of EN 755 specifies the mechanical property limits applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile. Temper

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Mechanical properties

BS ISO 28340:2013 铝表面联合涂层.铝表面阳极氧化涂层和电泳有机涂层的联合涂层通用规格

Combined coatings on aluminium. General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium

SANS 1578:2006 建筑铝型材涂层用耐久有机粉体

Specifies the characteristics of durable powders that are intended to be applied as organic coatings to aluminium alloy extrusions, sheet and welded

Durable organic powders for coating of external architectural aluminium