球压试验仪检测

T/HBJLXH 006-2023 球压试验仪校准方法

4 计量特性 4.1 总试验压力：（20±0.2）N 4.2 钢球直径：（5±0.03）mm 4.3 样品支座：直径（50±0.2）mm；高度（100±0.2）mm 6 校准项目及校准方法 6.1 外观 仪器应有铭牌、生产厂家

Ball pressure tester calibration method

QB 1048-1991 压缩强度试验仪

Compression Strength Tester

JB/T 7083-1993 低压电器冲击电压试验仪

本标准规定了低压电器冲击电压试验仪的基本参数，技术要求，试验方法和检验规则等。 本标准适用于额定输出冲击电网压波峰值为30kV及以下，满足GB 1497规定的冲击电压试验的冲击电压试验仪

Impulse voltage testing instruments for low voltage apparatus

JB/T 7083-2013 低压电器冲击电压试验仪

本标准规定了低压电器冲击电压试验仪的基本参数,技术要求,试验方法,检验规则,标志、包装、运输及贮存和保修期限。本标准适用于额定输出冲击电压波峰值为30 kV及以下,对交流50 Hz、额定电压1 200 V及以下或直流额定电压1500 V及以下的低压电器进行冲击电压试验的冲击电压试验仪(以下简称冲击

Impulse-voltage tester for low-voltage electrical installations

ONORM E 1372-1955 检测仪．球压检测仪、加热芯轴检测仪

ONORM E 1360-1960 检测仪．球压检测仪、加热芯轴检测仪

TCVN 7497-2005 沥青.软化点试验方法(环球仪法)

Bitumen.Test method for softening point (ring-and-ball apparatus)

BS EN 60695-10-2:2004 着火危险试验.异常热.球压试验

This part of IEC 60695 specifies the ball pressure test as a method for testing parts of nonmetallic materials for resistance to heat

Fire hazard testing - Abnormal heat - Ball pressure test

BS EN 60695-10-2:2003 着火危险试验.异常热.球压试验

This part of IEC 60695 specifies the ball pressure test as a method for testing parts of non-metallic materials for resistance to heat

Fire hazard testing - Abnormal heat - Ball pressure test

JB/T 8861-2004 球阀.静压寿命试验规程

本标准规定了工业用球阀的静压寿命试验的试验要求、试验方法、静压寿命试验次数的确定。 本标准适用于公称压力PN≤10.0MPa球阀的静压寿命试验

Ball valve-potential pressure life test regulation

JB/T 8861-1999 球阀 静压寿命试验规程

Ball valve static pressure life test regulations

ASTM F1888-98 棒球和垒球受压位移的试验方法

1.1 This test method describes a comparative measurement method for baseballs and softballs as defined by a static compression displacement test

Test Method for Compression-Displacement of Baseballs and Softballs

ASTM F1888-02 棒球和垒球受压位移的试验方法

The static compression-displacement of a baseball or softball is a mechanical property which can correlate to dynamic properties.

Test Method for Compression-Displacement of Baseballs and Softballs

ASTM F1888-09 棒球和垒球受压位移的试验方法

The static compression-displacement of a baseball or softball is a mechanical property which can correlate to dynamic properties.

This test

Test Method for Compression-Displacement of Baseballs and Softballs

KS K 0500-1995 机织物起球起球试验方法压力法

Testing method for the pilling in woven fabrics pressure method

T/HBJLXH 006-2023 球压试验仪校准方法

4 计量特性 4.1 总试验压力：（20±0.2）N 4.2 钢球直径：（5±0.03）mm 4.3 样品支座：直径（50±0.2）mm；高度（100±0.2）mm 6 校准项目及校准方法 6.1 外观 仪器应有铭牌、生产厂家

Ball pressure tester calibration method

QB 1048-1991 压缩强度试验仪

Compression Strength Tester

JB/T 7083-1993 低压电器冲击电压试验仪

本标准规定了低压电器冲击电压试验仪的基本参数，技术要求，试验方法和检验规则等。 本标准适用于额定输出冲击电网压波峰值为30kV及以下，满足GB 1497规定的冲击电压试验的冲击电压试验仪

Impulse voltage testing instruments for low voltage apparatus

JB/T 7083-2013 低压电器冲击电压试验仪

本标准规定了低压电器冲击电压试验仪的基本参数,技术要求,试验方法,检验规则,标志、包装、运输及贮存和保修期限。本标准适用于额定输出冲击电压波峰值为30 kV及以下,对交流50 Hz、额定电压1 200 V及以下或直流额定电压1500 V及以下的低压电器进行冲击电压试验的冲击电压试验仪(以下简称冲击

Impulse-voltage tester for low-voltage electrical installations

ONORM E 1372-1955 检测仪．球压检测仪、加热芯轴检测仪

ONORM E 1360-1960 检测仪．球压检测仪、加热芯轴检测仪

TCVN 7497-2005 沥青.软化点试验方法(环球仪法)

Bitumen.Test method for softening point (ring-and-ball apparatus)

BS EN 60695-10-2:2004 着火危险试验.异常热.球压试验

This part of IEC 60695 specifies the ball pressure test as a method for testing parts of nonmetallic materials for resistance to heat

Fire hazard testing - Abnormal heat - Ball pressure test

BS EN 60695-10-2:2003 着火危险试验.异常热.球压试验

This part of IEC 60695 specifies the ball pressure test as a method for testing parts of non-metallic materials for resistance to heat

Fire hazard testing - Abnormal heat - Ball pressure test

JB/T 8861-2004 球阀.静压寿命试验规程

本标准规定了工业用球阀的静压寿命试验的试验要求、试验方法、静压寿命试验次数的确定。 本标准适用于公称压力PN≤10.0MPa球阀的静压寿命试验

Ball valve-potential pressure life test regulation

JB/T 8861-1999 球阀 静压寿命试验规程

Ball valve static pressure life test regulations

ASTM F1888-98 棒球和垒球受压位移的试验方法

1.1 This test method describes a comparative measurement method for baseballs and softballs as defined by a static compression displacement test

Test Method for Compression-Displacement of Baseballs and Softballs

ASTM F1888-02 棒球和垒球受压位移的试验方法

The static compression-displacement of a baseball or softball is a mechanical property which can correlate to dynamic properties.

Test Method for Compression-Displacement of Baseballs and Softballs

ASTM F1888-09 棒球和垒球受压位移的试验方法

The static compression-displacement of a baseball or softball is a mechanical property which can correlate to dynamic properties.

This test

Test Method for Compression-Displacement of Baseballs and Softballs

KS K 0500-1995 机织物起球起球试验方法压力法

Testing method for the pilling in woven fabrics pressure method