GOST R 57034-2016 纤维增强热固性塑料管和管道部分. 塑料管和配件耐短时间液压的测定
Fiber-reinforced thermosetting plastics pipes and parts of pipelines. Determination of resistance to short-time hydraulic pressure of plastic pipes and fittings
GOST 34648-2020 纤维增强热固性塑料管材及管道零件 塑料管材和管件耐短时内液压的测定
Fiber-reinforced thermosetting plastic pipes and parts of pipelines. Determination of plastic pipes and fittings resistance to short-time internal hydraulic pressure
ANSI/AWWA D120-2009 热固性玻璃纤维增强塑料罐
This standard describes the composition, performance requirements, construction practices and workmanship, design, and methods of testing
Thermosetting Fiberglass-Reinforced Plastic Tanks
ANSI/ASTM F2686:2010 玻璃纤维增强热塑性塑料管规范
Specification for Glass Fiber Reinforced Thermoplastic Pipe
DIN EN 14447:2005 纤维增强塑料.玻璃垫增强热塑性塑料.流动性和固化的测定
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
BS EN 14447:2005 纤维增强塑料.玻璃垫增强热塑性塑料(GMT).测定流动性和固化性
This document defines a method for the determination of data suited to the assessment of the flowability and solidification of polypropylene based
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
EN 14447:2005 纤维增强塑料.玻璃垫增强热塑性塑料(GMT).测定流动性和固化性
This document defines a method for the determination of data suited to the assessment of the flowability and solidification of polypropylene based
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
GB/T 38725.2-2020 可盘绕式增强塑料管 第2部分：纤维增强热塑性塑料连续管
GB/T38725 的本部分规定了纤维增强热塑性塑料连续管(以下简称连续管)及接头的术语和定义.产品结构分类和标记、材料、一般要求、要求.试验方法、检验规则、标志\包装.运输和贮存。本部分适用于石油石化行业的油气集输.注醇.注水.污水输送,盐化工行业的贞水输送,温泉水答送,矿山浆体输送等
Spoolable reinforced plastic pipe一Part 2: Fiber reinforced thermoplastic coiled pipe
GB/T 36532-2018 纤维增强塑料 热固性模塑料和预浸料 固化特性测定
本标准规定了纤维增强热固性模塑料和预浸料固化特性的两种测定方法。需要测量的特性参数如下： ——放热反应产生的热量； ——模塑料随着温度的升高而产生的热膨胀； ——固化反应引起的收缩。 本方法适用于由热固性树脂及增强纤维组成的模塑料，主要应用于不饱和聚酯树脂模塑料。 方法1：确定热固性模塑料
Fibre-reinforced plastics.Thermosetting moulding compounds and prepregs.Determination of cure characteristics
DS/EN 14447:2005 纤维增强塑料 玻璃毡增强热塑性塑料（GMT） 流动性和凝固性的测定
This document defines a method for the determination of data suited to the assessment of the flowability and solidification of polypropylene based
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
LST EN 14447-2005 纤维增强塑料 玻璃毡增强热塑性塑料（GMT） 流动性和凝固性的测定
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
UNE-EN 14447:2006 纤维增强塑料 玻璃毡增强热塑性塑料（GMT） 流动性和凝固性的测定
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
DS/EN ISO 12114:1997 纤维增强塑料 热固性模塑料和预浸料 固化特性的测定
This International Standard specifies two methods for the determination of the cure characteristics of fibre-reinforced thermosetting moulding
Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics
GOST R 54560-2015 纤维增强型热固性塑料管和管道部件. 规格
Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications
0 纤维增强塑料 热固性模压塑料和预浸料 固化特性的测定
This International Standard specifies two methods for the determination of the cure characteristics of fibre-reinforced thermosetting moulding
GOST R 57034-2016 纤维增强热固性塑料管和管道部分. 塑料管和配件耐短时间液压的测定
Fiber-reinforced thermosetting plastics pipes and parts of pipelines. Determination of resistance to short-time hydraulic pressure of plastic pipes and fittings
GOST 34648-2020 纤维增强热固性塑料管材及管道零件 塑料管材和管件耐短时内液压的测定
Fiber-reinforced thermosetting plastic pipes and parts of pipelines. Determination of plastic pipes and fittings resistance to short-time internal hydraulic pressure
ANSI/AWWA D120-2009 热固性玻璃纤维增强塑料罐
This standard describes the composition, performance requirements, construction practices and workmanship, design, and methods of testing
Thermosetting Fiberglass-Reinforced Plastic Tanks
ANSI/ASTM F2686:2010 玻璃纤维增强热塑性塑料管规范
Specification for Glass Fiber Reinforced Thermoplastic Pipe
DIN EN 14447:2005 纤维增强塑料.玻璃垫增强热塑性塑料.流动性和固化的测定
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
BS EN 14447:2005 纤维增强塑料.玻璃垫增强热塑性塑料(GMT).测定流动性和固化性
This document defines a method for the determination of data suited to the assessment of the flowability and solidification of polypropylene based
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
EN 14447:2005 纤维增强塑料.玻璃垫增强热塑性塑料(GMT).测定流动性和固化性
This document defines a method for the determination of data suited to the assessment of the flowability and solidification of polypropylene based
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
GB/T 38725.2-2020 可盘绕式增强塑料管 第2部分：纤维增强热塑性塑料连续管
GB/T38725 的本部分规定了纤维增强热塑性塑料连续管(以下简称连续管)及接头的术语和定义.产品结构分类和标记、材料、一般要求、要求.试验方法、检验规则、标志\包装.运输和贮存。本部分适用于石油石化行业的油气集输.注醇.注水.污水输送,盐化工行业的贞水输送,温泉水答送,矿山浆体输送等
Spoolable reinforced plastic pipe一Part 2: Fiber reinforced thermoplastic coiled pipe
GB/T 36532-2018 纤维增强塑料 热固性模塑料和预浸料 固化特性测定
本标准规定了纤维增强热固性模塑料和预浸料固化特性的两种测定方法。需要测量的特性参数如下： ——放热反应产生的热量； ——模塑料随着温度的升高而产生的热膨胀； ——固化反应引起的收缩。 本方法适用于由热固性树脂及增强纤维组成的模塑料，主要应用于不饱和聚酯树脂模塑料。 方法1：确定热固性模塑料
Fibre-reinforced plastics.Thermosetting moulding compounds and prepregs.Determination of cure characteristics
DS/EN 14447:2005 纤维增强塑料 玻璃毡增强热塑性塑料（GMT） 流动性和凝固性的测定
This document defines a method for the determination of data suited to the assessment of the flowability and solidification of polypropylene based
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
LST EN 14447-2005 纤维增强塑料 玻璃毡增强热塑性塑料（GMT） 流动性和凝固性的测定
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
UNE-EN 14447:2006 纤维增强塑料 玻璃毡增强热塑性塑料（GMT） 流动性和凝固性的测定
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
DS/EN ISO 12114:1997 纤维增强塑料 热固性模塑料和预浸料 固化特性的测定
This International Standard specifies two methods for the determination of the cure characteristics of fibre-reinforced thermosetting moulding
Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics
GOST R 54560-2015 纤维增强型热固性塑料管和管道部件. 规格
Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications
0 纤维增强塑料 热固性模压塑料和预浸料 固化特性的测定
This International Standard specifies two methods for the determination of the cure characteristics of fibre-reinforced thermosetting moulding
编辑：北检院编辑部
