高强度胶粘剂检测

GB/T 7122-1996 高强度胶粘剂剥离强度的测定 浮辊法

本标准规定了用浮辊法测定高强度胶接接头的剥离强度的方法。该剥离强度是指在规定的度验条件下的刚性金属被粘物与挠性金属被粘物之间的剥离强度。 注：用浮辊法可获得比其他剥离方法更稳定的数据，试验过程中不要求挠性金属被粘物表面与辊轴表面吻合

Adhesives--Determination of peel resistance of high-strength adhesive bonds--Floating roller method

GOST R 57832-2017 聚合物复合材料 浮辊法测定高强度胶粘剂的抗剥离性

Polymer composites. Determination of peel resistance of high-strength adhesive bonds by Floating-roller method

KS M ISO 11343:2010 粘合剂.冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

이 표준은 2개의 금속 피접착층 사이의 고강도 접합 부분에 충격 하중하에서의 균열 저항을

Adhesives－Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions－Wedge impact method

EN ISO 11343:2019 粘合剂.冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

This document specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading of high-strength adhesive

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method

DIN EN ISO 11343:2005 粘合剂.冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

This Standard specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading ofhigh- strength adhesive

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003); German version EN ISO 11343:2005

BS EN 14493:2002 结构胶粘剂.在撞击条件下高强度胶粘剂的动态耐劈裂性的测定.楔牢法

Structural adhesives - Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions - Wedge impact method

BS EN ISO 11343:2006 粘合剂.在冲击条件下测定高强度胶粘剂耐动态劈裂性.楔形物冲击法

ISO 11343:2003 specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading of high-strength adhesive

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method

NF T76-159:2005 粘合剂.在冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method.

ISO 11343:2003 粘合剂.在冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

This International Standard specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method

ISO 11343:1993 粘合剂 在冲击条件下高强度胶粘剂耐动态劈裂的测定 楔形物冲击法

Adhesives; determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions; wedge impact method

EN ISO 11343:2005 粘合剂.冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法;代替EN 14493-2002

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method

FORD WSB-M2G281-D2-2006 金属增强的环氧树脂/玻璃纤维层压板用可膨胀、热固化、高强度胶粘剂***与标准FORD WSS-M99P1111-A一起使用***使用FORD WSS-M11P64-A1/A2/A3

ADHESIVE, HIGH STRENGTH, HEAT CURING, EXPANDABLE, EPOXY/GLASS FIBER LAMINATE, METAL REINFORCEMENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use FORD WSS-M11P64-A1/A2/A3)

FORD WSB-M2G281-D3-2006 金属增强的环氧树脂/玻璃纤维层压板用可膨胀、热固化、高强度胶粘剂***与标准FORD WSS-M99P1111-A一起使用***使用FORD WSS-M11P64-A1/A2/A3

ADHESIVE, HIGH STRENGTH, HEAT CURING, EXPANDABLE, EPOXY/GLASS FIBER LAMINATE, METAL REINFORCEMENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use FORD WSS-M11P64-A1/A2/A3)

IPC TM-650 2.4.42.1-1988 胶粘剂的高温力学强度保留

This standard establishes the requiremenftos r the design of printed boards for PC card form factors. The organic materials may be homogeneous

High Temperature Mechanical Strength Retention of Adhesives

NF T76-112:1995 胶粘剂.高强度粘接接合的抗剥离性的测定.浮辊法

Adhesives. Determination of peel resistance of high-strength adhesive bonds. Floating roller method.

GB/T 7122-1996 高强度胶粘剂剥离强度的测定 浮辊法

本标准规定了用浮辊法测定高强度胶接接头的剥离强度的方法。该剥离强度是指在规定的度验条件下的刚性金属被粘物与挠性金属被粘物之间的剥离强度。 注：用浮辊法可获得比其他剥离方法更稳定的数据，试验过程中不要求挠性金属被粘物表面与辊轴表面吻合

Adhesives--Determination of peel resistance of high-strength adhesive bonds--Floating roller method

GOST R 57832-2017 聚合物复合材料 浮辊法测定高强度胶粘剂的抗剥离性

Polymer composites. Determination of peel resistance of high-strength adhesive bonds by Floating-roller method

KS M ISO 11343:2010 粘合剂.冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

이 표준은 2개의 금속 피접착층 사이의 고강도 접합 부분에 충격 하중하에서의 균열 저항을

Adhesives－Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions－Wedge impact method

EN ISO 11343:2019 粘合剂.冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

This document specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading of high-strength adhesive

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method

DIN EN ISO 11343:2005 粘合剂.冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

This Standard specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading ofhigh- strength adhesive

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003); German version EN ISO 11343:2005

BS EN 14493:2002 结构胶粘剂.在撞击条件下高强度胶粘剂的动态耐劈裂性的测定.楔牢法

Structural adhesives - Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions - Wedge impact method

BS EN ISO 11343:2006 粘合剂.在冲击条件下测定高强度胶粘剂耐动态劈裂性.楔形物冲击法

ISO 11343:2003 specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading of high-strength adhesive

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method

NF T76-159:2005 粘合剂.在冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method.

ISO 11343:2003 粘合剂.在冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

This International Standard specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method

ISO 11343:1993 粘合剂 在冲击条件下高强度胶粘剂耐动态劈裂的测定 楔形物冲击法

Adhesives; determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions; wedge impact method

EN ISO 11343:2005 粘合剂.冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法;代替EN 14493-2002

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method

FORD WSB-M2G281-D2-2006 金属增强的环氧树脂/玻璃纤维层压板用可膨胀、热固化、高强度胶粘剂***与标准FORD WSS-M99P1111-A一起使用***使用FORD WSS-M11P64-A1/A2/A3

ADHESIVE, HIGH STRENGTH, HEAT CURING, EXPANDABLE, EPOXY/GLASS FIBER LAMINATE, METAL REINFORCEMENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use FORD WSS-M11P64-A1/A2/A3)

FORD WSB-M2G281-D3-2006 金属增强的环氧树脂/玻璃纤维层压板用可膨胀、热固化、高强度胶粘剂***与标准FORD WSS-M99P1111-A一起使用***使用FORD WSS-M11P64-A1/A2/A3

ADHESIVE, HIGH STRENGTH, HEAT CURING, EXPANDABLE, EPOXY/GLASS FIBER LAMINATE, METAL REINFORCEMENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use FORD WSS-M11P64-A1/A2/A3)

IPC TM-650 2.4.42.1-1988 胶粘剂的高温力学强度保留

This standard establishes the requiremenftos r the design of printed boards for PC card form factors. The organic materials may be homogeneous

High Temperature Mechanical Strength Retention of Adhesives

NF T76-112:1995 胶粘剂.高强度粘接接合的抗剥离性的测定.浮辊法

Adhesives. Determination of peel resistance of high-strength adhesive bonds. Floating roller method.