服务热线:400-635-0567

直流配电设备检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

TB/T 2993.2-2000 铁路通信站用-48V

本标准规定了铁路通信站用一48V 直流配电设备(以下简称“直流配电设备”)的通用技术要求、试验方法和仪表、抽样、检验规则及标志、包装、运输、贮存。 本标准适用于直流额定电压为-48V 、以低压电器和电子器件组成的配电设备

-48V DC power distribution equipment for railway communication station

TB/T 2993.6-2016 铁路通信源第6部分:

本部分规定了铁路通信电源直流配电设备的环境适应性要求,外观和结构要求,技术要求,检验方法,检验规则,标志、包装、运输、储存。 本部分适用于直流标称电压为-48 V、由低压电器和电子器件组成的配电设备,适用于铁路通信-48 V直流配电设备的产品制造、检验

Railway communication power supply equipment.Part 6:Direct current distribution

ETSI TR 100 283-2007 环境工程(EE).A接口的通信(dc)瞬时压(版本2.2.1)

Environmental Engineering (EE); Transient voltages at Interface "A" on telecommunications direct current (dc) power distributions (V2.2.1)

ETSI TR 100 283-2002 环境工程(EE).A接口的通信(dc)瞬时压(版本2.1.1)

Environmental Engineering (EE); Transient Voltages at Interface"A" on Telecommunications Direct Current (dc) Power Distributions V2.1.1

T/CSEE /Z0065-2017 网用控制 与保护试验规程

本指导性技术文件规定了直流配电网控制保护设备的工厂试验、出厂试验与现场试验等的内容与要求。 本指导性技术文件适用于直流配电网控制保护设备的试验系统搭建、试验项目制定与试验验收等工作

Test procedure for DC control and protection equipment for DC distribution network

T/CSEE /Z0064-2017 网用控制与保护 技术要求

本指导性技术文件规定了直流配电网控制保护设备在使用条件、功能性能等方面的基本要求,为 直流配电网控制保护设备的研制与选型等提供参考。 本指导性技术文件适用于直流配电网控制保护设备,作为设备设计、制造、验收等的依据

Technical requirements for DC control and protection equipment for DC distribution network

YD/T 2555-2013 通信用240V系统

本标准规定了通信用240V直流供电系统配电设备的产品组成、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于通信用240V直流供电系统配电设备(以下简称配电设备

Distribution equipments of 240V direct current power supply for telecommunications

YD/T 2555-2021 通信用240V/336V系统

T/CEEIA 546-2021 建筑用低压安全检验技术规范

本文件规定了额定电压直流1 500 V及以下直流建筑中低压配电设备的安全检验技术规范。适用于低压直流建筑在投入运行后的电气设备运维检验。 直流建筑低压配电设备主要包括:直流柜、直流断路器、隔离开关、储能电池、配电布线等。 本文件不适用特殊环境下的电气设施和设备的检验

Technical specification for safety inspection of low-voltage distribution equipment for DC buildings

YD/T 939-1997 传输源分列柜

本标准规定了传输设备用直流电源分配列柜的产品分类、技术要求、试验方法、检验规则和包装、标志、运输、贮存。 本标准适用于与有线传输设备配套使用的直流电源分配列柜。与其他设备配套使用的直流电源分配列柜也可参照使用

DC power distribution cabinet for transmission equipment

IEEE 1653.6-2018 牵引施中外壳接地的 IEEE 推荐做法

IEEE Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution Facilities

IEEE Std 1653.6-2018 牵引施中外壳接地的 IEEE 推荐做法

The grounding of dc equipment enclosures installed in dc traction power distribution facilities as well as related insulation treatments required

IEEE Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution Facilities

IEEE 1653.6-2013 牵引施中外壳接地的试用推荐规程

This document includes recommended practices for grounding of dc equipment enclosures installed in dc traction power distribution facilities. DC

Trial-Use Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution Facilities

IEEE P1653.6/D11, September 2012 牵引施中外壳接地的 IEEE 草案推荐做法

This document covers the grounding of dc equipment enclosures installed in dc traction power distribution facilities as well as related insulation

IEEE Draft Recommended Practice for Grounding of Direct Current Equipment Enclosures in Traction Power Distribution Facilities

IEEE P1653.6/D12, June 2013 牵引施中外壳接地的 IEEE 草案推荐做法

This document covers the grounding of dc equipment enclosures installed in dc traction power distribution facilities as well as related insulation

IEEE Draft Recommended Practice for Grounding of Direct Current Equipment Enclosures in Traction Power Distribution Facilities

TB/T 2993.2-2000 铁路通信站用-48V

本标准规定了铁路通信站用一48V 直流配电设备(以下简称“直流配电设备”)的通用技术要求、试验方法和仪表、抽样、检验规则及标志、包装、运输、贮存。 本标准适用于直流额定电压为-48V 、以低压电器和电子器件组成的配电设备

-48V DC power distribution equipment for railway communication station

TB/T 2993.6-2016 铁路通信源第6部分:

本部分规定了铁路通信电源直流配电设备的环境适应性要求,外观和结构要求,技术要求,检验方法,检验规则,标志、包装、运输、储存。 本部分适用于直流标称电压为-48 V、由低压电器和电子器件组成的配电设备,适用于铁路通信-48 V直流配电设备的产品制造、检验

Railway communication power supply equipment.Part 6:Direct current distribution

ETSI TR 100 283-2007 环境工程(EE).A接口的通信(dc)瞬时压(版本2.2.1)

Environmental Engineering (EE); Transient voltages at Interface "A" on telecommunications direct current (dc) power distributions (V2.2.1)

ETSI TR 100 283-2002 环境工程(EE).A接口的通信(dc)瞬时压(版本2.1.1)

Environmental Engineering (EE); Transient Voltages at Interface"A" on Telecommunications Direct Current (dc) Power Distributions V2.1.1

T/CSEE /Z0065-2017 网用控制 与保护试验规程

本指导性技术文件规定了直流配电网控制保护设备的工厂试验、出厂试验与现场试验等的内容与要求。 本指导性技术文件适用于直流配电网控制保护设备的试验系统搭建、试验项目制定与试验验收等工作

Test procedure for DC control and protection equipment for DC distribution network

T/CSEE /Z0064-2017 网用控制与保护 技术要求

本指导性技术文件规定了直流配电网控制保护设备在使用条件、功能性能等方面的基本要求,为 直流配电网控制保护设备的研制与选型等提供参考。 本指导性技术文件适用于直流配电网控制保护设备,作为设备设计、制造、验收等的依据

Technical requirements for DC control and protection equipment for DC distribution network

YD/T 2555-2013 通信用240V系统

本标准规定了通信用240V直流供电系统配电设备的产品组成、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于通信用240V直流供电系统配电设备(以下简称配电设备

Distribution equipments of 240V direct current power supply for telecommunications

YD/T 2555-2021 通信用240V/336V系统

T/CEEIA 546-2021 建筑用低压安全检验技术规范

本文件规定了额定电压直流1 500 V及以下直流建筑中低压配电设备的安全检验技术规范。适用于低压直流建筑在投入运行后的电气设备运维检验。 直流建筑低压配电设备主要包括:直流柜、直流断路器、隔离开关、储能电池、配电布线等。 本文件不适用特殊环境下的电气设施和设备的检验

Technical specification for safety inspection of low-voltage distribution equipment for DC buildings

YD/T 939-1997 传输源分列柜

本标准规定了传输设备用直流电源分配列柜的产品分类、技术要求、试验方法、检验规则和包装、标志、运输、贮存。 本标准适用于与有线传输设备配套使用的直流电源分配列柜。与其他设备配套使用的直流电源分配列柜也可参照使用

DC power distribution cabinet for transmission equipment

IEEE 1653.6-2018 牵引施中外壳接地的 IEEE 推荐做法

IEEE Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution Facilities

IEEE Std 1653.6-2018 牵引施中外壳接地的 IEEE 推荐做法

The grounding of dc equipment enclosures installed in dc traction power distribution facilities as well as related insulation treatments required

IEEE Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution Facilities

IEEE 1653.6-2013 牵引施中外壳接地的试用推荐规程

This document includes recommended practices for grounding of dc equipment enclosures installed in dc traction power distribution facilities. DC

Trial-Use Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution Facilities

IEEE P1653.6/D11, September 2012 牵引施中外壳接地的 IEEE 草案推荐做法

This document covers the grounding of dc equipment enclosures installed in dc traction power distribution facilities as well as related insulation

IEEE Draft Recommended Practice for Grounding of Direct Current Equipment Enclosures in Traction Power Distribution Facilities

IEEE P1653.6/D12, June 2013 牵引施中外壳接地的 IEEE 草案推荐做法

This document covers the grounding of dc equipment enclosures installed in dc traction power distribution facilities as well as related insulation

IEEE Draft Recommended Practice for Grounding of Direct Current Equipment Enclosures in Traction Power Distribution Facilities

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询