玻璃纤维增强塑料连续缠绕夹砂管检测

JC/T 2538-2019 玻璃纤维增强塑料连续缠绕夹砂管

T/ZZB 1751-2020 连续缠绕玻璃纤维增强塑料夹砂管

本文件规定了连续缠绕玻璃纤维增强塑料夹砂管（以下简称CWFP管）的术语和定义、分类和标记、基本要求、技术要求、试验方法、检验规则、标志、安装线、包装、运输和吊装、贮存及质量承诺。 本文件适用于公称直径为200 mm～4 000 mm， 压力等级为

Continuously wound glass fiber reinforced plastic sandwich pipes

T/CSTM 00592-2021 连续缠绕中空结构玻璃纤维增强塑料管

本文件规定了连续缠绕中空结构玻璃纤维增强塑料管的分类和标记、原材料、要求、试验方法、检验规则以及标志、包装、运输及起吊、贮存、出厂证明书和技术文件。 本文件适用于公称直径为800 mm～3000 mm，压力等级为0.1 MPa～1.6 MPa，环刚度等级为

Continuous advancing mandrel winding hollow structural glass fiber-reinforced plastics pipe

GB/T 21238-2007 玻璃纤维增强塑料夹砂管

本标准规定了玻璃纤维增强塑料夹砂管(以下简称FRPM管)的分类和标记、原材料、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于公称直径为100 mm～4 000mm，压力等级为0.1 MPa～2.5 MPa，环刚度等级为1 250 N／m《上标》2～10 000 N／m《上标2

Glass fiber reinforced plastics mortar pipes

CJ/T 3079-1998 玻璃纤维增强塑料夹砂管

Glass fibre reinforced plastic mortar pipe

GB/T 21238-2016 玻璃纤维增强塑料夹砂管

本标准规定了玻璃纤维增强塑料夹砂管的术语和定义，分类和标记，原材料，要求，试验方法，检验规则，标志、包装、运输、贮存、出厂证明书和技术文件。 本标准适用于公称直径为100 mm~4 000 mm，压力等级为0.1 MPa~3.2 MPa，环刚度等级为1 250 N/m²~10 000 N

Glass fiber reinforced plastics mortar pipes

DB43/T 1808-2020 连续缠绕铺放玻璃纤维增强塑料电缆导管技术规范

Technical specifications for continuous winding and laying of glass fiber reinforced plastic cable ducts

JC/T 838-1998 玻璃纤维缠绕增强热固性树酯夹砂压力管

Glass fiber winding reinforced thermosetting resin sand inclusion pressure pipe

T/ZZB 1375-2019 定长缠绕式玻璃纤维增强塑料顶管

本标准规定了定长缠绕式玻璃纤维增强塑料顶管（以下简称 GRP 顶管）的术语和定义、产品结构、分类和标记、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、出厂证明书和技术文件、其他和质量承诺。 本标准适用于公称直径为 100 mm

Fixed-length winding glass fiber reinforced plastics jacking pipes

ANSI/ASTM D2996:2001 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂)管用规范

This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up to 24 in.

Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe

ASTM D2996-01 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范

1.1 This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up

Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ASTM D2996-00 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范

1.1 This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up

Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ASTM D2996-95 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范

1.1 This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up

Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ASTM D2996-01(2007)e1 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范

1.1 This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up

Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ASTM D2996-15 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范

1.1 This specification covers machine-made reinforced

Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

JC/T 2538-2019 玻璃纤维增强塑料连续缠绕夹砂管

T/ZZB 1751-2020 连续缠绕玻璃纤维增强塑料夹砂管

本文件规定了连续缠绕玻璃纤维增强塑料夹砂管（以下简称CWFP管）的术语和定义、分类和标记、基本要求、技术要求、试验方法、检验规则、标志、安装线、包装、运输和吊装、贮存及质量承诺。 本文件适用于公称直径为200 mm～4 000 mm， 压力等级为

Continuously wound glass fiber reinforced plastic sandwich pipes

T/CSTM 00592-2021 连续缠绕中空结构玻璃纤维增强塑料管

本文件规定了连续缠绕中空结构玻璃纤维增强塑料管的分类和标记、原材料、要求、试验方法、检验规则以及标志、包装、运输及起吊、贮存、出厂证明书和技术文件。 本文件适用于公称直径为800 mm～3000 mm，压力等级为0.1 MPa～1.6 MPa，环刚度等级为

Continuous advancing mandrel winding hollow structural glass fiber-reinforced plastics pipe

GB/T 21238-2007 玻璃纤维增强塑料夹砂管

本标准规定了玻璃纤维增强塑料夹砂管(以下简称FRPM管)的分类和标记、原材料、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于公称直径为100 mm～4 000mm，压力等级为0.1 MPa～2.5 MPa，环刚度等级为1 250 N／m《上标》2～10 000 N／m《上标2

Glass fiber reinforced plastics mortar pipes

CJ/T 3079-1998 玻璃纤维增强塑料夹砂管

Glass fibre reinforced plastic mortar pipe

GB/T 21238-2016 玻璃纤维增强塑料夹砂管

本标准规定了玻璃纤维增强塑料夹砂管的术语和定义，分类和标记，原材料，要求，试验方法，检验规则，标志、包装、运输、贮存、出厂证明书和技术文件。 本标准适用于公称直径为100 mm~4 000 mm，压力等级为0.1 MPa~3.2 MPa，环刚度等级为1 250 N/m²~10 000 N

Glass fiber reinforced plastics mortar pipes

DB43/T 1808-2020 连续缠绕铺放玻璃纤维增强塑料电缆导管技术规范

Technical specifications for continuous winding and laying of glass fiber reinforced plastic cable ducts

JC/T 838-1998 玻璃纤维缠绕增强热固性树酯夹砂压力管

Glass fiber winding reinforced thermosetting resin sand inclusion pressure pipe

T/ZZB 1375-2019 定长缠绕式玻璃纤维增强塑料顶管

本标准规定了定长缠绕式玻璃纤维增强塑料顶管（以下简称 GRP 顶管）的术语和定义、产品结构、分类和标记、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、出厂证明书和技术文件、其他和质量承诺。 本标准适用于公称直径为 100 mm

Fixed-length winding glass fiber reinforced plastics jacking pipes

ANSI/ASTM D2996:2001 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂)管用规范

This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up to 24 in.

Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe

ASTM D2996-01 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范

1.1 This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up

Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ASTM D2996-00 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范

1.1 This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up

Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ASTM D2996-95 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范

1.1 This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up

Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ASTM D2996-01(2007)e1 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范

1.1 This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up

Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ASTM D2996-15 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范

1.1 This specification covers machine-made reinforced

Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe