GB/T 13663.2-2018 给水用聚乙烯（PE）管道系统 第2部分：管材
Polyethylene(PE) piping systems for water supply—Part2: Pipes
GB/T 13663-2000 给水用聚乙烯(PE)管材
本标准规定了用聚乙烯树脂为主要原料的材料，经挤出成型的给水用聚乙烯管材（以下简称“管材’)的产品规格、技术要求、试验方法、检验规则、标志、包装、运输、贮存。本标准还规定了原料的基本性能要求，包括分类体系。 本标准适用于用PE 63、PE 80和PE 100材料（见4.1）制造的给水
Polyethylene pipes for water supply
SH/T 1758-2007 给水管道系统用聚乙烯（PE）专用料
本标准规定了给水管道系统用聚乙烯（PE）专用料的命名、分类、要求、试验方法、检验规则、 标志及包装、运输和贮存。 本标准适用于具有特殊添加剂和着色剂（黑色或蓝色）的颗粒状聚乙烯材料。 该材料可用于制造给水管道系统用的聚乙烯管材和管件
Polyethylene (PE) materials for water supply piping systems
GB/T 13663.3-2018 给水用聚乙烯（PE）管道系统 第3部分：管件
Polyethylene(PE)piping systems for water supply—Part 3: Fittings
GB/T 13663.2-2005 给水用聚乙烯(PE)管道系统 第2部分;管件
GB/T 13663的本部分规定了给水用聚乙烯（PE）管件（以下简称管件）的定义、材料、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于由PE63、PE80和PE100材料（见4.1）制造的管件以及本部分规定的聚乙烯给水系统中的机械连接管件
Polyethylene(PE)pipings systems for water supply.Part 2:Fittings
BS ISO 4427-2:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.管
This part of ISO 4427 specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Pipes
BS ISO 4427-3:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.管件
This part of ISO 4427 specifies the general aspects of fittings made from polyethylene (PE) for piping systems intended for the conveyance of water
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Fittings
DB21/T 2815-2017 小管径给水用聚乙烯（PE）管材
Small diameter polyethylene (PE) pipes for water supply
BS ISO 4427-1:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.总则
This part of ISO 4427 specifies the general aspects of polyethylene (PE) piping systems (mains and service pipes) intended for the conveyance of water
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - General
DB13/T 2027-2014 大口径聚乙烯（PE）给水管材
Large diameter polyethylene (PE) water supply pipe
GB/T 13663.1-2017 给水用聚乙烯(PE)管道系统 第1部分:总则
GB/T 13663的本部分规定了给水用聚乙烯(PE)管道系统的术语和定义、符号、缩略语、材料和卫生要求。 本部分与GB/T 13663的其他部分一起，适用于水温不大于40 ℃，最大工作压力(MOP)不大于2.0 MPa，一般用途的压力输水和饮用水输配的聚乙烯管道系统及其组件
Polyethylene(PE) piping systems for water supply.Part 1:General
SANS 4427-2 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管道
SANS 4427-2:2008 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管道
Specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water prior to treatment
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes
GB/T 13663.5-2018 给水用聚乙烯（PE）管道系统 第5部分：系统适用性
Polyethylene (PE) piping systems for water supply—Part 5: Fitness for purpose of the system
ISO 4427-2:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管
This part of ISO 4427 specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes
GB/T 13663.2-2018 给水用聚乙烯（PE）管道系统 第2部分：管材
Polyethylene(PE) piping systems for water supply—Part2: Pipes
GB/T 13663-2000 给水用聚乙烯(PE)管材
本标准规定了用聚乙烯树脂为主要原料的材料，经挤出成型的给水用聚乙烯管材（以下简称“管材’)的产品规格、技术要求、试验方法、检验规则、标志、包装、运输、贮存。本标准还规定了原料的基本性能要求，包括分类体系。 本标准适用于用PE 63、PE 80和PE 100材料（见4.1）制造的给水
Polyethylene pipes for water supply
SH/T 1758-2007 给水管道系统用聚乙烯（PE）专用料
本标准规定了给水管道系统用聚乙烯（PE）专用料的命名、分类、要求、试验方法、检验规则、 标志及包装、运输和贮存。 本标准适用于具有特殊添加剂和着色剂（黑色或蓝色）的颗粒状聚乙烯材料。 该材料可用于制造给水管道系统用的聚乙烯管材和管件
Polyethylene (PE) materials for water supply piping systems
GB/T 13663.3-2018 给水用聚乙烯（PE）管道系统 第3部分：管件
Polyethylene(PE)piping systems for water supply—Part 3: Fittings
GB/T 13663.2-2005 给水用聚乙烯(PE)管道系统 第2部分;管件
GB/T 13663的本部分规定了给水用聚乙烯（PE）管件（以下简称管件）的定义、材料、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于由PE63、PE80和PE100材料（见4.1）制造的管件以及本部分规定的聚乙烯给水系统中的机械连接管件
Polyethylene(PE)pipings systems for water supply.Part 2:Fittings
BS ISO 4427-2:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.管
This part of ISO 4427 specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Pipes
BS ISO 4427-3:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.管件
This part of ISO 4427 specifies the general aspects of fittings made from polyethylene (PE) for piping systems intended for the conveyance of water
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Fittings
DB21/T 2815-2017 小管径给水用聚乙烯（PE）管材
Small diameter polyethylene (PE) pipes for water supply
BS ISO 4427-1:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.总则
This part of ISO 4427 specifies the general aspects of polyethylene (PE) piping systems (mains and service pipes) intended for the conveyance of water
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - General
DB13/T 2027-2014 大口径聚乙烯（PE）给水管材
Large diameter polyethylene (PE) water supply pipe
GB/T 13663.1-2017 给水用聚乙烯(PE)管道系统 第1部分:总则
GB/T 13663的本部分规定了给水用聚乙烯(PE)管道系统的术语和定义、符号、缩略语、材料和卫生要求。 本部分与GB/T 13663的其他部分一起，适用于水温不大于40 ℃，最大工作压力(MOP)不大于2.0 MPa，一般用途的压力输水和饮用水输配的聚乙烯管道系统及其组件
Polyethylene(PE) piping systems for water supply.Part 1:General
SANS 4427-2 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管道
SANS 4427-2:2008 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管道
Specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water prior to treatment
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes
GB/T 13663.5-2018 给水用聚乙烯（PE）管道系统 第5部分：系统适用性
Polyethylene (PE) piping systems for water supply—Part 5: Fitness for purpose of the system
ISO 4427-2:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管
This part of ISO 4427 specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes
编辑：北检院编辑部
