YB/T 4137-2013 低焊接裂纹敏感性高强度钢板
本标准规定了低焊接裂纹敏感性高强度钢板的牌号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书等。本标准适用于厚度5mm~100mm的低焊接裂纹敏感性高强度钢板,主要用于制作对焊接性要求高的水电站压力钢管、工程机械、铁路车辆、桥梁、高层及大跨度建筑等。低焊接
Low welding crack susceptibility for high strength steel plates
YB/T 4137-2005 低焊接裂纹敏感性高强度钢板
本标准规定了低焊接裂纹敏感性高强度钢板的尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书等。 本标准适用于制作水电站压力钢管、工程机械、铁路车辆、桥梁、高层及大跨度建筑等对焊接性要求高的厚度6mm～100mm的高强度钢板。 钢带亦可参照执行
Low welding crack susceptibility high strength steel plates
T/SSEA 0049-2020 压力容器用低焊接裂纹敏感性 调质高强度钢板
本标准规定了压力容器用低焊接裂纹敏感性调质高强度钢板的牌号表示方法、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书
Quenched and tempered high strength steel plate with low welding crack sensitivity for pressure vessel
BULLETIN 480-2003 磷和硫对奥氏体不锈钢焊接热裂纹敏感性的影响
In this bulletin@ the individual effects of residual P and S on the behavior of fusion welds in austenitic stainless steel have been differentiated
EFFECTS OF PHOSPHOROUS AND SULFUR ON SUCEPTIBILITY TO WELD HOT CRACKING IN AUSTENITIC STAINLESS STEELS
BULLETIN 79-1962 焊接超高强度钢板
Interest in the welding of ultra high strength steel sheet has been generated within the last several years by the requirement of the rocket motor
WELDING ULTRA HIGH STRENGTH STEEL SHEET
T/CSAE 155-2020 超高强度汽车钢板氢致延迟断裂敏感性 U 形恒弯曲载荷试验方法
本文件规定了汽车用钢板氢致延迟断裂敏感性测试的原理、相关术语定义、符号和说明、试样要求、试验设备、试验环境、试验过程、数据处理和试验报告内容要求等方面。 本文件适用于抗拉强度1000 MPa及以上各类超高强度汽车用钢裸板的氢致延迟断裂敏感性测评，面向国内超高强度汽车用钢上下游产业链，也可
U-shaped constant bending load test method for hydrogen induced delayed fracture sensitivity of ultra high strength automobile steel plate
GJB 1483-1992 超高强度钢板材表面裂纹断裂韧度Kie试验方法
BULLETIN 345-1989 评估钢焊件的断裂韧性和开裂敏感性 综述
The literature survey reviews the domestic and foreign literature to determine@ document and evaluate (1) the parameters of welding that control
ASSESSING FRACTURE TOUGHNESS AND CRACKING SUSCEPTIBILITY OF STEEL WELDMENTS - A REVIEW
ISO 547:1975 低碳钢和低合金高强度钢焊接用焊条.长度和公差
Electrodes for the welding of mild steel and low alloy high tensile steel — Lengths and tolerance
GB/T 38277-2019 船用高强度止裂钢板
Brittle crack arrest high strength steel plate for ship
BULLETIN 349-1989 铬钼钢的焊后热处理开裂；高强度低合金钢的焊后热处理开裂
This Bulletin contains two reports that evaluate the PWHT cracking susceptibility of several Cr-Mo steels and several HSLA pressure vessel
POSTWELD HEAT TREATMENT CRACKING IN CHROMIUM-MOLYBDENUM STEELS ; POSTWELD HEAT TREATMENT CRACKING IN HIGH STRENGTH LOW ALLOY STEELS
BULLETIN 213-1976 含铌高强度低合金钢的焊接性；含铌或含钒高强度低合金钢焊缝的结构和性能综述
Significant production of niobium steels began about 15 years ago. The early steels contained up to 0.03% Nb and permitted higher yield strengths
WELDABILITY OF NIOBIUM CONTAINING HIGH STRENGTH LOW ALLOY STEEL; A REVIEW OF THE STRUCTURE AND PROPERTIES OF WELDS IN COLUMBIUM OR VANADIUM CONTAINING HIGH STRENGTH LOW ALLOY STEELS
ESDU 81011-1981 低强度和中等强度低合金钢板 棒材和锻件的疲劳裂纹扩展
Constant amplitude fatigue crack propagation rate (da/dN) data are provided for a wide range of low and medium strength low alloy steels in the form
Fatigue crack propagation in low and medium strength low alloy steel plate@ bar and forgings.
BULLETIN 358-1990 裂纹深度与试样宽度比对高强低应变硬化钢弹塑性断裂韧性的影响
An experimental and analytical study of square three-point bend specimens was conducted to investigate the elastic-plastic fracture toughness
THE EFFECT OF CRACK DEPTH TO SPECIMEN WIDTH RATIO ON THE ELASTIC-PLASTIC FRACTURE TOUGHNESS OF A HIGH-STRENGTH LOW-STRAIN HARDENING STEEL
JIS Z 3316:2017 用于焊接低碳钢、高强度钢和低温钢的实心焊丝和焊条
Solid wires and rods for TIG welding of mild steel, high strength steel and low temperature service steel
YB/T 4137-2013 低焊接裂纹敏感性高强度钢板
本标准规定了低焊接裂纹敏感性高强度钢板的牌号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书等。本标准适用于厚度5mm~100mm的低焊接裂纹敏感性高强度钢板,主要用于制作对焊接性要求高的水电站压力钢管、工程机械、铁路车辆、桥梁、高层及大跨度建筑等。低焊接
Low welding crack susceptibility for high strength steel plates
YB/T 4137-2005 低焊接裂纹敏感性高强度钢板
本标准规定了低焊接裂纹敏感性高强度钢板的尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书等。 本标准适用于制作水电站压力钢管、工程机械、铁路车辆、桥梁、高层及大跨度建筑等对焊接性要求高的厚度6mm～100mm的高强度钢板。 钢带亦可参照执行
Low welding crack susceptibility high strength steel plates
T/SSEA 0049-2020 压力容器用低焊接裂纹敏感性 调质高强度钢板
本标准规定了压力容器用低焊接裂纹敏感性调质高强度钢板的牌号表示方法、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书
Quenched and tempered high strength steel plate with low welding crack sensitivity for pressure vessel
BULLETIN 480-2003 磷和硫对奥氏体不锈钢焊接热裂纹敏感性的影响
In this bulletin@ the individual effects of residual P and S on the behavior of fusion welds in austenitic stainless steel have been differentiated
EFFECTS OF PHOSPHOROUS AND SULFUR ON SUCEPTIBILITY TO WELD HOT CRACKING IN AUSTENITIC STAINLESS STEELS
BULLETIN 79-1962 焊接超高强度钢板
Interest in the welding of ultra high strength steel sheet has been generated within the last several years by the requirement of the rocket motor
WELDING ULTRA HIGH STRENGTH STEEL SHEET
T/CSAE 155-2020 超高强度汽车钢板氢致延迟断裂敏感性 U 形恒弯曲载荷试验方法
本文件规定了汽车用钢板氢致延迟断裂敏感性测试的原理、相关术语定义、符号和说明、试样要求、试验设备、试验环境、试验过程、数据处理和试验报告内容要求等方面。 本文件适用于抗拉强度1000 MPa及以上各类超高强度汽车用钢裸板的氢致延迟断裂敏感性测评，面向国内超高强度汽车用钢上下游产业链，也可
U-shaped constant bending load test method for hydrogen induced delayed fracture sensitivity of ultra high strength automobile steel plate
GJB 1483-1992 超高强度钢板材表面裂纹断裂韧度Kie试验方法
BULLETIN 345-1989 评估钢焊件的断裂韧性和开裂敏感性 综述
The literature survey reviews the domestic and foreign literature to determine@ document and evaluate (1) the parameters of welding that control
ASSESSING FRACTURE TOUGHNESS AND CRACKING SUSCEPTIBILITY OF STEEL WELDMENTS - A REVIEW
ISO 547:1975 低碳钢和低合金高强度钢焊接用焊条.长度和公差
Electrodes for the welding of mild steel and low alloy high tensile steel — Lengths and tolerance
GB/T 38277-2019 船用高强度止裂钢板
Brittle crack arrest high strength steel plate for ship
BULLETIN 349-1989 铬钼钢的焊后热处理开裂；高强度低合金钢的焊后热处理开裂
This Bulletin contains two reports that evaluate the PWHT cracking susceptibility of several Cr-Mo steels and several HSLA pressure vessel
POSTWELD HEAT TREATMENT CRACKING IN CHROMIUM-MOLYBDENUM STEELS ; POSTWELD HEAT TREATMENT CRACKING IN HIGH STRENGTH LOW ALLOY STEELS
BULLETIN 213-1976 含铌高强度低合金钢的焊接性；含铌或含钒高强度低合金钢焊缝的结构和性能综述
Significant production of niobium steels began about 15 years ago. The early steels contained up to 0.03% Nb and permitted higher yield strengths
WELDABILITY OF NIOBIUM CONTAINING HIGH STRENGTH LOW ALLOY STEEL; A REVIEW OF THE STRUCTURE AND PROPERTIES OF WELDS IN COLUMBIUM OR VANADIUM CONTAINING HIGH STRENGTH LOW ALLOY STEELS
ESDU 81011-1981 低强度和中等强度低合金钢板 棒材和锻件的疲劳裂纹扩展
Constant amplitude fatigue crack propagation rate (da/dN) data are provided for a wide range of low and medium strength low alloy steels in the form
Fatigue crack propagation in low and medium strength low alloy steel plate@ bar and forgings.
BULLETIN 358-1990 裂纹深度与试样宽度比对高强低应变硬化钢弹塑性断裂韧性的影响
An experimental and analytical study of square three-point bend specimens was conducted to investigate the elastic-plastic fracture toughness
THE EFFECT OF CRACK DEPTH TO SPECIMEN WIDTH RATIO ON THE ELASTIC-PLASTIC FRACTURE TOUGHNESS OF A HIGH-STRENGTH LOW-STRAIN HARDENING STEEL
JIS Z 3316:2017 用于焊接低碳钢、高强度钢和低温钢的实心焊丝和焊条
Solid wires and rods for TIG welding of mild steel, high strength steel and low temperature service steel
编辑：北检院编辑部
