发布时间：2023-09-12 21:49:36
点击量：0
有样品要送检？试试一键送检，5分钟极速响应
在线提交检测需求
对接客服咨询检测
Verification Regulations for Electric Valve Positioner
本标准规定了测试和评定单作用或双作用定位器静态和动态性能的试验。这些试验可用于能接收标准模拟输入信号（按GB/T 3369.1、GB/T 3369.2和GB/T 777规定）并有气动输出的定位器
Valve positioners for use in industrial-process system.Part 1:Methods of evaluating the performance of valve positioners with pneumatic outputs
GB/T 22137的本部分规定了单作用或双作用智能阀门定位器(以下简称：定位器)的性能评定方法，旨在通过设计评审和试验来测试和确定智能阀门定位器的静态和动态性能、智能化程度和通信能力。 本部分适用于接收标准模拟量电输入信号(见IEC 60381)和(或)经由数据通信链路传输的数字信号并有气动输出
Valve positioners for industrial process control systems.Part 2:Methods of evaluating the performance of intelligent valve positioners
GB/T 22137.2所规定的设计评审和测试，是为了测量和确定单作用或双作用智能阀门定位器的静态和动态性能、智能化程度和通信能力。这些测试可用于接收标准模拟量电路输入信号的定位器（在GB/T 3369.1和GB/T 3369.2中被规定）和（或）经由通过数据通信链路传输数字信号并有气动输出的定位器
Valve positioners for use in industrial-process system.Part 2:Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
本标规定了工业过程控制系统用阀门定位器的产品分类、技术要求、试验方法、检验规则等。 本标准适用于与气动薄膜执行机构或气动活塞执行机构配套使用的气动和电动模拟输入信号的定位器
Valve positioners for use in industrial-process control system
本标准规定了工业过程控制系统用阀门定位器(以下简称定位器)的术语和定义、产品分类和基本参数、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于与气动执行机构配套使用，能接受标准化模拟输入信号或数字信号，并有气动输出的各种常规气动定位器、电-气定位器以及带微处理器的电-气定位器
Valve positioners for industry-process control systems
本标准规定了基于HART协议的阀门定位器有关HART通信的术语和定义、缩略语、要求和试验方法。本标准适用于基于HART协议的阀门定位器
Valve positioner based on HART protocol general specification
本部分规定了测试和评定单作用或双作用定位器静态和动态性能的试验。这些试验可用于能接收 标准模拟输入信号(按GB／T 3369．1、GB／T 3369．2和GB／T 777规定)并有气动输出的定位器。 注：对于脉冲或者数字输入信号的定位器，可能需要其他相应标准。本标准描述的方法可能
Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
This International Standard specifies tests designed to determine the static and dynamic performance of single-acting or double-acting positioners
Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
IEC 61514:2000 specifies tests designed to determine the static and dynamic performance of single-acting or double-acting valve positioners. The tests
Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
This European Standard specifies tests designed to determine the static and dynamic performance of single-acting or double-acting analogue
Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
이 규격은 단동 또는 복동 포지셔너의 정적 성능과 동적 성능을 결정하기 위하여 설계와
Industrial process control systems-Methods of evaluating the performance of valve positioners with pneumatic outputs
Industrial process control systems. Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
Inspection of positioners used for nuclear power plant valves
To be read in conjunction with BS EN 61514:2002
Industrial process control systems - Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
Verification Regulations for Electric Valve Positioner
本标准规定了测试和评定单作用或双作用定位器静态和动态性能的试验。这些试验可用于能接收标准模拟输入信号（按GB/T 3369.1、GB/T 3369.2和GB/T 777规定）并有气动输出的定位器
Valve positioners for use in industrial-process system.Part 1:Methods of evaluating the performance of valve positioners with pneumatic outputs
GB/T 22137的本部分规定了单作用或双作用智能阀门定位器(以下简称：定位器)的性能评定方法，旨在通过设计评审和试验来测试和确定智能阀门定位器的静态和动态性能、智能化程度和通信能力。 本部分适用于接收标准模拟量电输入信号(见IEC 60381)和(或)经由数据通信链路传输的数字信号并有气动输出
Valve positioners for industrial process control systems.Part 2:Methods of evaluating the performance of intelligent valve positioners
GB/T 22137.2所规定的设计评审和测试，是为了测量和确定单作用或双作用智能阀门定位器的静态和动态性能、智能化程度和通信能力。这些测试可用于接收标准模拟量电路输入信号的定位器（在GB/T 3369.1和GB/T 3369.2中被规定）和（或）经由通过数据通信链路传输数字信号并有气动输出的定位器
Valve positioners for use in industrial-process system.Part 2:Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
本标规定了工业过程控制系统用阀门定位器的产品分类、技术要求、试验方法、检验规则等。 本标准适用于与气动薄膜执行机构或气动活塞执行机构配套使用的气动和电动模拟输入信号的定位器
Valve positioners for use in industrial-process control system
本标准规定了工业过程控制系统用阀门定位器(以下简称定位器)的术语和定义、产品分类和基本参数、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于与气动执行机构配套使用，能接受标准化模拟输入信号或数字信号，并有气动输出的各种常规气动定位器、电-气定位器以及带微处理器的电-气定位器
Valve positioners for industry-process control systems
本标准规定了基于HART协议的阀门定位器有关HART通信的术语和定义、缩略语、要求和试验方法。本标准适用于基于HART协议的阀门定位器
Valve positioner based on HART protocol general specification
本部分规定了测试和评定单作用或双作用定位器静态和动态性能的试验。这些试验可用于能接收 标准模拟输入信号(按GB／T 3369．1、GB／T 3369．2和GB／T 777规定)并有气动输出的定位器。 注：对于脉冲或者数字输入信号的定位器，可能需要其他相应标准。本标准描述的方法可能
Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
This International Standard specifies tests designed to determine the static and dynamic performance of single-acting or double-acting positioners
Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
IEC 61514:2000 specifies tests designed to determine the static and dynamic performance of single-acting or double-acting valve positioners. The tests
Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
This European Standard specifies tests designed to determine the static and dynamic performance of single-acting or double-acting analogue
Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
이 규격은 단동 또는 복동 포지셔너의 정적 성능과 동적 성능을 결정하기 위하여 설계와
Industrial process control systems-Methods of evaluating the performance of valve positioners with pneumatic outputs
Industrial process control systems. Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
Inspection of positioners used for nuclear power plant valves
To be read in conjunction with BS EN 61514:2002
Industrial process control systems - Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
首页
点击咨询
