军用专用车辆检测

GJB 1106A-2012 军用专用车辆定型试验规程

本标准规定了军用专用车辆定型试验的基本要求、试验项目及方法、结果评定、试验报告编写要求。 本标准适用于军用专用车辆定型基地试验和鉴定试验

The engineering-service test procedure for military special purpose vehicles

STANAG 2027-1975 军用车辆标记

Marking of Military Vehicles (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For additional information please s

GJB 1777-1993 军用专用汽车通用规范

General specifications for military vehicles

GJB 1363-1992 军用罐式专用车通用规范

General specifications for military tank vehicles

DLA MS90908 REV B NOTICE 2-1999 填料 油舱 军用车辆

This notice should be filed in front of MS90908B(AT), dated 10 December 1982

FILLER TUBE, FUEL TANK - MILITARY VEHICLES

DLA MS90908 REV B-1982 填料 油舱 军用车辆

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications

FILLER TUBE, FUEL TANK - MILITARY VEHICLES

ARMY MIL-PRF-62419 A-1996 军用车辆复合材料

This specification is approved for use by all Departments and Agencies of the Department of Defense. i. SCOPE 1.1 Scope. This specification covers

COMPOSITE MATERIALS FOR MILITARY VEHICLES

ARMY MIL-PRF-62419 B-2010 军用车辆复合材料

COMPOSITE MATERIALS FOR MILITARY VEHICLES

TB/T 2597-2017 机车车辆车轮专用量具

本标准规定了机车车辆车轮专用量具(以下简称车轮专用量具)的术语和定义、结构形式与基本参数、技术要求、检验方法、检验规则及标志、包装和储存。 本标准适用于静态接触测量机车、车辆和动车组用车轮的轮缘和踏面参数及车轮直径的专用计量器具的设计、制造和检验。地铁、轻轨等车辆用车轮专用计量器具可参照使用

Measuring tools of the wheel for rolling stock

NF F01-302:1982 铁路车辆. 车辆专用术语. 工作和试验车辆

Rolling stock. Specific terms for rolling stock. Working and test vehicles.

TB/T 1362-2017 机车车辆轮对专用量具

本标准规定了机车车辆轮对专用量具(以下简称轮对专用量具)的结构形式、技术要求、检验方法、检验规则及标志、包装和储存。 本标准适用于静态接触测量标准轨距的机车、动车组、客车和货车用轮对的轮对内侧面距离、轮位差和盘位差专用计量器具的设计、制造和检验。地铁、轻轨等车辆用轮对专用计量器具可参照使用

Measuring tools of the wheelsets for rolling stock

QC/T 1149-2021 大件运输专用车辆

Special vehicles for transporting large items

ARMY MIL-STD-1180 B CHG NOTICE 1-1991 军用地面车辆安全标准

This standard applies to military ground vehicles listed in table I. Administrative vehicles and construction equipment/material handling equipment

SAFETY STANDARDS FOR MILITARY GROUND VEHICLES

DLA MS35644 REV G-2011 加注口颈：军用车辆油箱

FILLER NECK: FUEL TANK ?MILITARY VEHICLES

GJB 8260-2014 军用车辆质量分级与评定

本标准规定了军用车辆质量分级、转级与评定的技术要求。本标准适用于军队列装的通用车辆装备(以下简称“车辆

Quality grading and assessing for military motor vehicle

GJB 1106A-2012 军用专用车辆定型试验规程

本标准规定了军用专用车辆定型试验的基本要求、试验项目及方法、结果评定、试验报告编写要求。 本标准适用于军用专用车辆定型基地试验和鉴定试验

The engineering-service test procedure for military special purpose vehicles

STANAG 2027-1975 军用车辆标记

Marking of Military Vehicles (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For additional information please s

GJB 1777-1993 军用专用汽车通用规范

General specifications for military vehicles

GJB 1363-1992 军用罐式专用车通用规范

General specifications for military tank vehicles

DLA MS90908 REV B NOTICE 2-1999 填料 油舱 军用车辆

This notice should be filed in front of MS90908B(AT), dated 10 December 1982

FILLER TUBE, FUEL TANK - MILITARY VEHICLES

DLA MS90908 REV B-1982 填料 油舱 军用车辆

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications

FILLER TUBE, FUEL TANK - MILITARY VEHICLES

ARMY MIL-PRF-62419 A-1996 军用车辆复合材料

This specification is approved for use by all Departments and Agencies of the Department of Defense. i. SCOPE 1.1 Scope. This specification covers

COMPOSITE MATERIALS FOR MILITARY VEHICLES

ARMY MIL-PRF-62419 B-2010 军用车辆复合材料

COMPOSITE MATERIALS FOR MILITARY VEHICLES

TB/T 2597-2017 机车车辆车轮专用量具

本标准规定了机车车辆车轮专用量具(以下简称车轮专用量具)的术语和定义、结构形式与基本参数、技术要求、检验方法、检验规则及标志、包装和储存。 本标准适用于静态接触测量机车、车辆和动车组用车轮的轮缘和踏面参数及车轮直径的专用计量器具的设计、制造和检验。地铁、轻轨等车辆用车轮专用计量器具可参照使用

Measuring tools of the wheel for rolling stock

NF F01-302:1982 铁路车辆. 车辆专用术语. 工作和试验车辆

Rolling stock. Specific terms for rolling stock. Working and test vehicles.

TB/T 1362-2017 机车车辆轮对专用量具

本标准规定了机车车辆轮对专用量具(以下简称轮对专用量具)的结构形式、技术要求、检验方法、检验规则及标志、包装和储存。 本标准适用于静态接触测量标准轨距的机车、动车组、客车和货车用轮对的轮对内侧面距离、轮位差和盘位差专用计量器具的设计、制造和检验。地铁、轻轨等车辆用轮对专用计量器具可参照使用

Measuring tools of the wheelsets for rolling stock

QC/T 1149-2021 大件运输专用车辆

Special vehicles for transporting large items

ARMY MIL-STD-1180 B CHG NOTICE 1-1991 军用地面车辆安全标准

This standard applies to military ground vehicles listed in table I. Administrative vehicles and construction equipment/material handling equipment

SAFETY STANDARDS FOR MILITARY GROUND VEHICLES

DLA MS35644 REV G-2011 加注口颈：军用车辆油箱

FILLER NECK: FUEL TANK ?MILITARY VEHICLES

GJB 8260-2014 军用车辆质量分级与评定

本标准规定了军用车辆质量分级、转级与评定的技术要求。本标准适用于军队列装的通用车辆装备(以下简称“车辆

Quality grading and assessing for military motor vehicle