厚度表检测

JB/T 10035-1999 厚度表

本标准规定了厚度表的术语、型式、基本参数和尺寸、技术要求和标志、包装等。 本标准适用于分度值为 0.1mm、0.01mm、0.001mm，测量范围为 （0～1）mm，（0～10）mm，（0～20）mm，（0～30）mm的厚度表

Thickness dial gauge

JJF 1255-2010 厚度表校准规范

本规范适用于分度值/分辨力为0.1 mm、 0.01 mm、 0.002 mm、 0.001 mm, 测量范围 0 mm-30 mm 中各种规格的指针式和数显式厚度表的校准

Calibration Specification for Thickness Gauges

ISO 4065:1978 热塑塑料管.通用管壁厚度表

Thermoplastic pipes; Universal wall thickness table

SANS 4065:1996 热塑塑料管．通用管壁厚度表

Specifies the relationship between the nominal wall thickness en and the nominal outside diameter dn of thermoplastics pipes. It is applicable

Thermoplastics pipes - Universal wall thickness table

TCVN 6141-2003 热塑性塑料管.通用管壁厚度表

Thermoplastics pipes.Universal wall thickness table

ISO 4065:1996 热塑性塑料管 通用管壁厚度表

Describes the relationship between the nominal wall thickness and the nominal outside diameter of thermoplastics pipes. Applicable to smooth

Thermoplastic pipes - Universal wall thickness table

KS M ISO 4065:2008 热塑性塑料管.通用管壁厚度表

이 표준은 열가소성 관의 공칭 관벽 두께 en과 공칭 바깥지름 dn의 관계에 대하여 규정한

Thermoplastics pipes－Universal wall thickness table

ISO 4065:2018 热塑性塑料管.通用管壁厚度表

This document specifies the relationship between the nominal wall thickness en and the nominal outside diameter an ofthermoplastics pipes

Thermoplastics pipes - Universal wall thickness table

BS EN ISO 12625-3:2014 薄纸和薄纸制品. 厚度, 蓬松厚度, 表观体密度和体积的测定

Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density and bulk

GB/T 24328.2-2020 卫生纸及其制品 第2部分: 厚度、层积厚度、表观层积紧度和松厚度的测定

GB/T24328 的本部分规定了在2.0kPa测定压强条件下卫生纸及其制品的厚度、层积厚度的测定方法,以及表观层积紧度、松厚度的计算方法。本部分适用于卫生纸及其制品

Tissue paper and tissue products—Part 2: Determination of thickness, bulking thickness and apparent bulk density and bulk

DIN EN ISO 12625-3:2014-09 薄纸和薄纸产品第3部分：厚度、膨松厚度、表观堆积密度和松厚度的测定

Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014); German version EN ISO 12625-3:2014

CSN 50 0311-1983 纸张测试．厚度，表面密度和详细容积的测定

Schválení STSEV 3000-81 doporu?ilo ministerstvo pr?myslu ?SR. Zpracovatel: IRAPA, Praha - Ing. Milo? Vocílka Oborové normaliza?ní st?edisko: IRAPA

Paper testing. Determination of thiokness, pparent density and speciíic volume

NF Q34-030-3*NF EN ISO 12625-3:2014 薄纸和薄纸制品 第3部分：厚度、蓬松厚度、表观体密度和体积的测定

Tissue paper and tissue products - Part 3 : determination of thickness, bulking thickness and apparent bulk density and bulk

SNI ISO 12625-3:2014 薄纸和薄纸制品《第3部分：厚度、膨松厚度、表观松密度和体积的测定》

Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk

ISO 12625-3:2014 薄纸和薄纸制品. 第3部分: 厚度, 蓬松厚度, 表观体密度和体积的测定

This part of ISO 12625 specifies a test method for the determination of thickness and bulking thickness and the calculation of apparent bulk density

Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk

JB/T 10035-1999 厚度表

本标准规定了厚度表的术语、型式、基本参数和尺寸、技术要求和标志、包装等。 本标准适用于分度值为 0.1mm、0.01mm、0.001mm，测量范围为 （0～1）mm，（0～10）mm，（0～20）mm，（0～30）mm的厚度表

Thickness dial gauge

JJF 1255-2010 厚度表校准规范

本规范适用于分度值/分辨力为0.1 mm、 0.01 mm、 0.002 mm、 0.001 mm, 测量范围 0 mm-30 mm 中各种规格的指针式和数显式厚度表的校准

Calibration Specification for Thickness Gauges

ISO 4065:1978 热塑塑料管.通用管壁厚度表

Thermoplastic pipes; Universal wall thickness table

SANS 4065:1996 热塑塑料管．通用管壁厚度表

Specifies the relationship between the nominal wall thickness en and the nominal outside diameter dn of thermoplastics pipes. It is applicable

Thermoplastics pipes - Universal wall thickness table

TCVN 6141-2003 热塑性塑料管.通用管壁厚度表

Thermoplastics pipes.Universal wall thickness table

ISO 4065:1996 热塑性塑料管 通用管壁厚度表

Describes the relationship between the nominal wall thickness and the nominal outside diameter of thermoplastics pipes. Applicable to smooth

Thermoplastic pipes - Universal wall thickness table

KS M ISO 4065:2008 热塑性塑料管.通用管壁厚度表

이 표준은 열가소성 관의 공칭 관벽 두께 en과 공칭 바깥지름 dn의 관계에 대하여 규정한

Thermoplastics pipes－Universal wall thickness table

ISO 4065:2018 热塑性塑料管.通用管壁厚度表

This document specifies the relationship between the nominal wall thickness en and the nominal outside diameter an ofthermoplastics pipes

Thermoplastics pipes - Universal wall thickness table

BS EN ISO 12625-3:2014 薄纸和薄纸制品. 厚度, 蓬松厚度, 表观体密度和体积的测定

Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density and bulk

GB/T 24328.2-2020 卫生纸及其制品 第2部分: 厚度、层积厚度、表观层积紧度和松厚度的测定

GB/T24328 的本部分规定了在2.0kPa测定压强条件下卫生纸及其制品的厚度、层积厚度的测定方法,以及表观层积紧度、松厚度的计算方法。本部分适用于卫生纸及其制品

Tissue paper and tissue products—Part 2: Determination of thickness, bulking thickness and apparent bulk density and bulk

DIN EN ISO 12625-3:2014-09 薄纸和薄纸产品第3部分：厚度、膨松厚度、表观堆积密度和松厚度的测定

Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014); German version EN ISO 12625-3:2014

CSN 50 0311-1983 纸张测试．厚度，表面密度和详细容积的测定

Schválení STSEV 3000-81 doporu?ilo ministerstvo pr?myslu ?SR. Zpracovatel: IRAPA, Praha - Ing. Milo? Vocílka Oborové normaliza?ní st?edisko: IRAPA

Paper testing. Determination of thiokness, pparent density and speciíic volume

NF Q34-030-3*NF EN ISO 12625-3:2014 薄纸和薄纸制品 第3部分：厚度、蓬松厚度、表观体密度和体积的测定

Tissue paper and tissue products - Part 3 : determination of thickness, bulking thickness and apparent bulk density and bulk

SNI ISO 12625-3:2014 薄纸和薄纸制品《第3部分：厚度、膨松厚度、表观松密度和体积的测定》

Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk

ISO 12625-3:2014 薄纸和薄纸制品. 第3部分: 厚度, 蓬松厚度, 表观体密度和体积的测定

This part of ISO 12625 specifies a test method for the determination of thickness and bulking thickness and the calculation of apparent bulk density

Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk