GB/T 14330-2008 硬质合金机夹三面刃铣刀
本标准规定了硬质合金机夹三面刃铣刀的形式和尺寸、外观、表面粗糙度、位置公差、材料和硬度、标志和包装等基本要求。 本标准适用于直径63mm~160mm、宽度6mm~12mm硬质合金机夹三面刃铣刀（以下简称铣刀
Machanically clamped carbide side milling cutters
GB/T 14330-1993 硬质合金机夹三面刃铣刀
本标准规定了硬质合金机夹三面刃铣刀的型式尺寸、技术要求、性能试验和标志包装的基本要求。 本标准适用于直径63～160mm、宽度6～12mm的硬质合金机夹三面刃铣刀（以下简称铣刀
Machanically clamped carbide side milling cutters
GB/T 9062-2006 硬质合金错齿三面刃铣刀
本标准规定了硬质合金错齿三面刃铣刀的型式和尺寸、外观和表面粗糙度、位置公差、材料和硬度、标志和包装的基本要求。 本标准适用于镶硬质合金刀片的错齿三面刃铣刀
Side and face milling cutters with double alternate helical teeth with carbide tips
GB/T 9062-1988 硬质合金错齿三面刃铣刀
本标准适用于镶硬质合金刀片的错齿三面刃铣刀
Side and face milling cutters with double alternate helical teeth with carbide tips
HB 2435-1992 焊硬质合金刀片的镶齿两面刃和三面刃铣刀用刀齿
Teeth for milling cutters with inserts for welded carbide inserts on double and triple sides
HB 2436-1992 焊硬质合金刀片的镶齿两面刃和三面刃铣刀用楔
Wedges for side and side and side milling cutters with inserts for welded carbide inserts
HB 2435-1979 焊硬质合金刀片的镶齿两面刃和三面刃铣刀用刀齿
Teeth for milling cutters with inserts for welded carbide inserts on double and triple sides
HB 2436-1979 焊硬质合金刀片的镶齿两面刃和三面刃铣刀用楔
Wedges for side and side and side milling cutters with inserts for welded carbide inserts
HB 4631-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=100～180mm（小孔）
Inserted three-sided edge milling cutter with welded carbide insert D=100~180mm (small hole)
HB 4632-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=200～315mm（小孔）
Inserted three-sided edge milling cutter with welded carbide insert D=200~315mm (small hole)
HB 4630-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=200～315mm（大孔）
Inserted three-sided edge milling cutter with welded carbide insert D=200~315mm (large hole)
HB 4629-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=100～180mm（大孔）
Inserted three-sided edge milling cutter with welded carbide insert D=100~180mm (large hole)
GOST 14700-1969 两面刃和三面刃圆盘铣刀用镶硬质合金刀片.结构及尺寸
Carbide tipped blades for double- and three-side disk cutters. Construction and dimensions
GOST 5348-1969 镶硬质合金刀片的三面刃圆盘铣刀.结构及尺寸
Side-and-face milling cutters with inserted carbide blades. Construction and dimensions
GOST 28435-1990 带机械夹固多刃硬质合金刀片的端铣刀.基本尺寸
End mills with mechanically clamped indexable inserts. Basic dimensions
GB/T 14330-2008 硬质合金机夹三面刃铣刀
本标准规定了硬质合金机夹三面刃铣刀的形式和尺寸、外观、表面粗糙度、位置公差、材料和硬度、标志和包装等基本要求。 本标准适用于直径63mm~160mm、宽度6mm~12mm硬质合金机夹三面刃铣刀（以下简称铣刀
Machanically clamped carbide side milling cutters
GB/T 14330-1993 硬质合金机夹三面刃铣刀
本标准规定了硬质合金机夹三面刃铣刀的型式尺寸、技术要求、性能试验和标志包装的基本要求。 本标准适用于直径63～160mm、宽度6～12mm的硬质合金机夹三面刃铣刀（以下简称铣刀
Machanically clamped carbide side milling cutters
GB/T 9062-2006 硬质合金错齿三面刃铣刀
本标准规定了硬质合金错齿三面刃铣刀的型式和尺寸、外观和表面粗糙度、位置公差、材料和硬度、标志和包装的基本要求。 本标准适用于镶硬质合金刀片的错齿三面刃铣刀
Side and face milling cutters with double alternate helical teeth with carbide tips
GB/T 9062-1988 硬质合金错齿三面刃铣刀
本标准适用于镶硬质合金刀片的错齿三面刃铣刀
Side and face milling cutters with double alternate helical teeth with carbide tips
HB 2435-1992 焊硬质合金刀片的镶齿两面刃和三面刃铣刀用刀齿
Teeth for milling cutters with inserts for welded carbide inserts on double and triple sides
HB 2436-1992 焊硬质合金刀片的镶齿两面刃和三面刃铣刀用楔
Wedges for side and side and side milling cutters with inserts for welded carbide inserts
HB 2435-1979 焊硬质合金刀片的镶齿两面刃和三面刃铣刀用刀齿
Teeth for milling cutters with inserts for welded carbide inserts on double and triple sides
HB 2436-1979 焊硬质合金刀片的镶齿两面刃和三面刃铣刀用楔
Wedges for side and side and side milling cutters with inserts for welded carbide inserts
HB 4631-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=100～180mm（小孔）
Inserted three-sided edge milling cutter with welded carbide insert D=100~180mm (small hole)
HB 4632-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=200～315mm（小孔）
Inserted three-sided edge milling cutter with welded carbide insert D=200~315mm (small hole)
HB 4630-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=200～315mm（大孔）
Inserted three-sided edge milling cutter with welded carbide insert D=200~315mm (large hole)
HB 4629-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=100～180mm（大孔）
Inserted three-sided edge milling cutter with welded carbide insert D=100~180mm (large hole)
GOST 14700-1969 两面刃和三面刃圆盘铣刀用镶硬质合金刀片.结构及尺寸
Carbide tipped blades for double- and three-side disk cutters. Construction and dimensions
GOST 5348-1969 镶硬质合金刀片的三面刃圆盘铣刀.结构及尺寸
Side-and-face milling cutters with inserted carbide blades. Construction and dimensions
GOST 28435-1990 带机械夹固多刃硬质合金刀片的端铣刀.基本尺寸
End mills with mechanically clamped indexable inserts. Basic dimensions
编辑：北检院编辑部
