绒毛织物检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

FZ/T 01041-2014 长度和高度的测定

本标准规定了测定绒毛织物绒毛长度和绒毛高度的两种方法,即直量法和仪器法。本标准适用于各类有绒毛和地组织(底布)结构的织绒类绒毛织物,如长毛绒、人造毛皮、丝绒、灯芯绒、平绒等。本标准不适用于拉绒、磨毛等起绒类织物

Pile fabrics.Determination of pile length and pile height

FZ/T 01041-1995 长度和高度的测定

Determination of pile length and pile height of pile fabrics

DIN 62055:1994 针品..词汇

The document defines terms for pile fabrics (knitted pile fabrics

Knitted fabrics; pile fabrics; vocabulary

T/CNTAC 22-2018 性的试验方法

本标准规定了采用胶带粘贴法测定绒毛织物掉毛性的试验方法,包括手撕法和仪器法

Testing method of fiber shedding for pile fabrics

SN/T 1647-2005 纺保持性测试方法

本标准规定了绒毛织物绒毛保持性的两种测试方法,称量法(A法)和透光法(B法)。 本标准适用于割绒起毛的织物,不适用于拉毛起绒的织物、地毯织物和植绒织物

Textiles--Test method for pile retention of pile fabric

FZ/T 01033-1993 单位面积质量和含(覆)量的测定

本标准规定了绒毛类织物单位面积质量和含绒量(含绒率)或履绒址(履绒率)的测定方法,规定了标准状态、干燥状态和公定回潮率下三种状态的指标表示方法。 本标准适用于各类有绒毛和地组织(底布)结构的绒毛类织物,如长毛绒、驼绒、人造毛皮、地(壁)毯等,但不适用于拉绒、磨毛等起绒类织物

Determination of the mass per unit area and the amount of pile (cover) of pile fabrics

FZ/T 01033-2012 单位面积质量和含(覆)率的试验方法

本标准规定了绒毛类织物单位面积质量和含(覆)绒率的测定方法,并给出了标准状态、干燥状态和公定回潮率下三种状态的指标表示方法。 本标准适用于有绒毛和地组织(底布)结构的绒毛类织物,如长毛绒、驼绒、人造毛皮、丝绒、织(割)绒布、地(壁)毯等。 本标准不适用于拉绒、磨毛等起绒类织物

Test method of mass per unit area and pile percent of pile fabric

DS/EN 12132-1:1999 羽性能的试验方法第1部分:摩擦试验

This European Standard describes a method for the determination of down and/or feather penetration through the primary tick fabric of a specimen

Feather and down - Methods of testing the down proof properties of fabrics - Part 1: Rubbing test

DS/EN 12132-2/A1:2003 羽 性能的试验方法 第2部分:冲击试验

This standard describes a method for the determination of down and feather penetration through the primary tick fabric of a specimen containing

Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test

DS/EN 12132-2:1999 羽 性能的试验方法 第2部分:冲击试验

This European Standard describes a method for the determination of down and feather penetration through the primary tick fabric of a specimen

Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test

LST EN 12132-2-2002 羽 性能的试验方法 第2部分:冲击试验

Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test

LST EN 12132-1-2002 羽性能的试验方法第1部分:摩擦试验

Feather and down - Methods of testing the down proof properties of fabrics - Part 1: Rubbing test

LST EN 12132-2-2002/A1-2003 羽 性能的试验方法 第2部分:冲击试验

Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test

UNE-EN 12132-2/A1:2003 羽 性能的试验方法 第2部分:冲击试验

Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test

DIN EN 15114:2008 铺地.铺地的分类

This European Standard specifies the requirements for the classification of textile floor coverings without pile into use classes in respect of wear

Textile floor coverings - Classification of textile floor coverings without pile; German version EN 15114:2006+A1:2008

FZ/T 01041-2014 长度和高度的测定

本标准规定了测定绒毛织物绒毛长度和绒毛高度的两种方法,即直量法和仪器法。本标准适用于各类有绒毛和地组织(底布)结构的织绒类绒毛织物,如长毛绒、人造毛皮、丝绒、灯芯绒、平绒等。本标准不适用于拉绒、磨毛等起绒类织物

Pile fabrics.Determination of pile length and pile height

FZ/T 01041-1995 长度和高度的测定

Determination of pile length and pile height of pile fabrics

DIN 62055:1994 针品..词汇

The document defines terms for pile fabrics (knitted pile fabrics

Knitted fabrics; pile fabrics; vocabulary

T/CNTAC 22-2018 性的试验方法

本标准规定了采用胶带粘贴法测定绒毛织物掉毛性的试验方法,包括手撕法和仪器法

Testing method of fiber shedding for pile fabrics

SN/T 1647-2005 纺保持性测试方法

本标准规定了绒毛织物绒毛保持性的两种测试方法,称量法(A法)和透光法(B法)。 本标准适用于割绒起毛的织物,不适用于拉毛起绒的织物、地毯织物和植绒织物

Textiles--Test method for pile retention of pile fabric

FZ/T 01033-1993 单位面积质量和含(覆)量的测定

本标准规定了绒毛类织物单位面积质量和含绒量(含绒率)或履绒址(履绒率)的测定方法,规定了标准状态、干燥状态和公定回潮率下三种状态的指标表示方法。 本标准适用于各类有绒毛和地组织(底布)结构的绒毛类织物,如长毛绒、驼绒、人造毛皮、地(壁)毯等,但不适用于拉绒、磨毛等起绒类织物

Determination of the mass per unit area and the amount of pile (cover) of pile fabrics

FZ/T 01033-2012 单位面积质量和含(覆)率的试验方法

本标准规定了绒毛类织物单位面积质量和含(覆)绒率的测定方法,并给出了标准状态、干燥状态和公定回潮率下三种状态的指标表示方法。 本标准适用于有绒毛和地组织(底布)结构的绒毛类织物,如长毛绒、驼绒、人造毛皮、丝绒、织(割)绒布、地(壁)毯等。 本标准不适用于拉绒、磨毛等起绒类织物

Test method of mass per unit area and pile percent of pile fabric

DS/EN 12132-1:1999 羽性能的试验方法第1部分:摩擦试验

This European Standard describes a method for the determination of down and/or feather penetration through the primary tick fabric of a specimen

Feather and down - Methods of testing the down proof properties of fabrics - Part 1: Rubbing test

DS/EN 12132-2/A1:2003 羽 性能的试验方法 第2部分:冲击试验

This standard describes a method for the determination of down and feather penetration through the primary tick fabric of a specimen containing

Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test

DS/EN 12132-2:1999 羽 性能的试验方法 第2部分:冲击试验

This European Standard describes a method for the determination of down and feather penetration through the primary tick fabric of a specimen

Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test

LST EN 12132-2-2002 羽 性能的试验方法 第2部分:冲击试验

Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test

LST EN 12132-1-2002 羽性能的试验方法第1部分:摩擦试验

Feather and down - Methods of testing the down proof properties of fabrics - Part 1: Rubbing test

LST EN 12132-2-2002/A1-2003 羽 性能的试验方法 第2部分:冲击试验

Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test

UNE-EN 12132-2/A1:2003 羽 性能的试验方法 第2部分:冲击试验

Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test

DIN EN 15114:2008 铺地.铺地的分类

This European Standard specifies the requirements for the classification of textile floor coverings without pile into use classes in respect of wear

Textile floor coverings - Classification of textile floor coverings without pile; German version EN 15114:2006+A1:2008

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。