线型光束感烟火灾探测器检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

GB 14003-2005 线

本标准规定了线型光束感烟火灾探测器的术语和定义、一般要求、要求和试验方法、检验规则和标志。 本标准适用于一般工业与民用建筑中安装使用的利用减光原理探测烟雾的相对部件间光路长度为1m~100m,且最小光路长度不大于10m的线型光束感烟火灾探测器及带有探测热扰动功能的线型光束

Smoke detectors.Line detectors using an optical light beam

GB 14003-1992 线技术要求及试验方法

本标准规定了利用光束减弱原理来探测烟雾的火灾探测器的技术要求、试验方法及标志。 本标准适用于相对部件间光路长度为1~100m,且最小光路长度不大于10m的光束感烟火灾探测器及带有探测热骚动(热骚动在光束中作为减弱光束的附属物)功能的光束感烟火灾探测器

Technical requirements and test methods for optical beam smoke fire detectors

AS 7240.12:2007 和报警系统.发射线

Specifies requirements, test methods and performance criteria for line type smoke detectors utilizing the attenuation and/or changes in attenuation

Fire detection and alarm systems - Line type smoke detectors using a transmitted optical beam

GB 4715-2005 点

本标准规定了点型感烟火灾探测器的一般要求、要求和试验方法、检验规则和标志。 本标准适用于一般工业与民用建筑中安装的使用散射光、透射光工作原理的点型光电感烟火灾探测器。其他环境中安装的或使用其他工作原理的点型感烟火灾探测器,除特殊技术要求应由有关标准另行规定外,亦应执行本标准

Smoke detectors-Point detectors using scattered light,transmitted light or ionization

BS EN 54-12:2002 警报系统..利用线

This European Standard specifies requirements, test methods and performance criteria for line smoke detectors utilising the attenuation and/or changes

Fire detection and fire alarm systems - Smoke detectors - Line detectors using an optical light beam

BS EN 54-12:2003 警报系统 利用线

Fire detection and fire alarm systems. Smoke detectors. Line detectors using an optical light beam

ISO 7240-12:2014 和警报系统. 第12部分: 利用传输线

Fire detection and alarm systems - Part 12: Line type smoke detectors using a transmitted optical beam

AS 1603.7:1996 自动警保护和报警系统

Specifies design and performance requirements and methods of test for optical beam smoke detectors

Automatic fire detection and alarm systems - Optical beam smoke detectors

GB/T 21197-2007 线

本标准规定了线型光纤感温火灾探测器(以下简称探测器)的定义、分类、一般要求、试验与要求和检验规则。 本标准适用于采用感温光纤作为感温部件的线型感温火灾探测器。其他具有特殊性能的探测器,除特殊要求应由有关标准另行规定外,亦应执行本标准

Line-type optical fiber heat detector

EN 54-12:2002 警报系统.第12部分:.使用线

This European Standard specifies requirements, test methods and performance criteria for line smoke detectorsutilisingThe attenuation and/or changes

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical light beam

UNE-EN 54-12:2003 报警系统 第12部分: 使用线

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical light beam.

NF S61-960-12*NF EN 54-12:2015 报警系统 第12部分: 使用线

Fire detection and fire alarm systems - Part 12 : smoke detectors - Line detectors using an optical beam

DIN EN 54-12:2015-10 报警系统 第12部分: 使用线

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam; German version EN 54-12:2015

DIN EN 54-12 Berichtigung 1:2018-08 报警系统 第12部分: 使用线

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam; German version EN 54-12:2015, Corrigendum to DIN EN 54-12:2015-10

UNE-EN 54-12:2019 报警系统 第12部分: 使用线

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam

GB 14003-2005 线

本标准规定了线型光束感烟火灾探测器的术语和定义、一般要求、要求和试验方法、检验规则和标志。 本标准适用于一般工业与民用建筑中安装使用的利用减光原理探测烟雾的相对部件间光路长度为1m~100m,且最小光路长度不大于10m的线型光束感烟火灾探测器及带有探测热扰动功能的线型光束

Smoke detectors.Line detectors using an optical light beam

GB 14003-1992 线技术要求及试验方法

本标准规定了利用光束减弱原理来探测烟雾的火灾探测器的技术要求、试验方法及标志。 本标准适用于相对部件间光路长度为1~100m,且最小光路长度不大于10m的光束感烟火灾探测器及带有探测热骚动(热骚动在光束中作为减弱光束的附属物)功能的光束感烟火灾探测器

Technical requirements and test methods for optical beam smoke fire detectors

AS 7240.12:2007 和报警系统.发射线

Specifies requirements, test methods and performance criteria for line type smoke detectors utilizing the attenuation and/or changes in attenuation

Fire detection and alarm systems - Line type smoke detectors using a transmitted optical beam

GB 4715-2005 点

本标准规定了点型感烟火灾探测器的一般要求、要求和试验方法、检验规则和标志。 本标准适用于一般工业与民用建筑中安装的使用散射光、透射光工作原理的点型光电感烟火灾探测器。其他环境中安装的或使用其他工作原理的点型感烟火灾探测器,除特殊技术要求应由有关标准另行规定外,亦应执行本标准

Smoke detectors-Point detectors using scattered light,transmitted light or ionization

BS EN 54-12:2002 警报系统..利用线

This European Standard specifies requirements, test methods and performance criteria for line smoke detectors utilising the attenuation and/or changes

Fire detection and fire alarm systems - Smoke detectors - Line detectors using an optical light beam

BS EN 54-12:2003 警报系统 利用线

Fire detection and fire alarm systems. Smoke detectors. Line detectors using an optical light beam

ISO 7240-12:2014 和警报系统. 第12部分: 利用传输线

Fire detection and alarm systems - Part 12: Line type smoke detectors using a transmitted optical beam

AS 1603.7:1996 自动警保护和报警系统

Specifies design and performance requirements and methods of test for optical beam smoke detectors

Automatic fire detection and alarm systems - Optical beam smoke detectors

GB/T 21197-2007 线

本标准规定了线型光纤感温火灾探测器(以下简称探测器)的定义、分类、一般要求、试验与要求和检验规则。 本标准适用于采用感温光纤作为感温部件的线型感温火灾探测器。其他具有特殊性能的探测器,除特殊要求应由有关标准另行规定外,亦应执行本标准

Line-type optical fiber heat detector

EN 54-12:2002 警报系统.第12部分:.使用线

This European Standard specifies requirements, test methods and performance criteria for line smoke detectorsutilisingThe attenuation and/or changes

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical light beam

UNE-EN 54-12:2003 报警系统 第12部分: 使用线

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical light beam.

NF S61-960-12*NF EN 54-12:2015 报警系统 第12部分: 使用线

Fire detection and fire alarm systems - Part 12 : smoke detectors - Line detectors using an optical beam

DIN EN 54-12 Berichtigung 1:2018-08 报警系统 第12部分: 使用线

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam; German version EN 54-12:2015, Corrigendum to DIN EN 54-12:2015-10

UNE-EN 54-12:2019 报警系统 第12部分: 使用线

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam

DIN EN 54-12:2015-10 报警系统 第12部分: 使用线

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam; German version EN 54-12:2015

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。