发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22
点击量:0
Verification Regulation of Thread Measuring Wires
本规范适用于钢、硬质合金、陶瓷等材料制造的各类针规、三针的校准
Calibration Specification for Cylindrica Measuring Pin
本标准规定了螺纹测量用三针的术语和定义、型式与基本参数、要求、检验方法、标志与包装等。 本标准适用于检验螺纹中径用的,公称直径D为0.118mm~6.212mm的三针
Three wires for screw thread measuing
Three wires for screw thread measuring
Three-edged needle
本标准规定了三棱针的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存等要求。 本标准适用于三棱针
three edged needle
Three-edged needle
MS27796D, dated 26 October 1983, has been reviewed and determined to be valid for use in acquisition
CONNECTOR-BAYONET, THREE PIN, OXYGEN MASK
DIMENSIONS AND TOLERANEES SHALL BE IN ACCORDANCE WITH ANSI V14.5 (19731 DIMEN. SIONS IN INCHES. TOLERANCES ARE OECIMALS'.O16 UNLESS OTHERWISE
CONNECTOR-BAYONET, THREE PIN, OXYGEN MASK
THE RELATIV€ POSITION OF THE CONNECTORS SHALL BE AS SHOWN, THEMARKINGS SHALL BE PERMANENT. AT LEAST 1/8 INCH HIGH CONFORMING TO hi533558 AND CLEARLY
INDICATOR, TACHOMETER, TRIPLE POINTER, HELICOPTER
This standard prescribes requirements and tests for three-pin (two-pole and earthing-pin ) plugs having the base and cover, or either
Diese ?NORM enth?lt die Abmessungen des Anschlu?bereiches von Skibindungen für Skischuhe für den Langlauf und die Anforderungen an die Konstruktion
Cross countiy skiing; skibindings with three pins; dimensions of the skibindings
Cross country skiing; skiboots with three pin holes; dimensions of the skiboot Interface Diese ?NORM ist anzuwenden für Skischuhe für
Cross country skiing; skiboots with three pin holes; dimensions of the skiboot Interface
Gross-country ski boots with three pin holes. Dimensions. interface and design
Cross-country ski boots with three pin holes. Demensions, interface and design
Verification Regulation of Thread Measuring Wires
本规范适用于钢、硬质合金、陶瓷等材料制造的各类针规、三针的校准
Calibration Specification for Cylindrica Measuring Pin
本标准规定了螺纹测量用三针的术语和定义、型式与基本参数、要求、检验方法、标志与包装等。 本标准适用于检验螺纹中径用的,公称直径D为0.118mm~6.212mm的三针
Three wires for screw thread measuing
Three wires for screw thread measuring
Three-edged needle
本标准规定了三棱针的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存等要求。 本标准适用于三棱针
three edged needle
Three-edged needle
MS27796D, dated 26 October 1983, has been reviewed and determined to be valid for use in acquisition
CONNECTOR-BAYONET, THREE PIN, OXYGEN MASK
DIMENSIONS AND TOLERANEES SHALL BE IN ACCORDANCE WITH ANSI V14.5 (19731 DIMEN. SIONS IN INCHES. TOLERANCES ARE OECIMALS'.O16 UNLESS OTHERWISE
CONNECTOR-BAYONET, THREE PIN, OXYGEN MASK
THE RELATIV€ POSITION OF THE CONNECTORS SHALL BE AS SHOWN, THEMARKINGS SHALL BE PERMANENT. AT LEAST 1/8 INCH HIGH CONFORMING TO hi533558 AND CLEARLY
INDICATOR, TACHOMETER, TRIPLE POINTER, HELICOPTER
This standard prescribes requirements and tests for three-pin (two-pole and earthing-pin ) plugs having the base and cover, or either
Diese ?NORM enth?lt die Abmessungen des Anschlu?bereiches von Skibindungen für Skischuhe für den Langlauf und die Anforderungen an die Konstruktion
Cross countiy skiing; skibindings with three pins; dimensions of the skibindings
Cross country skiing; skiboots with three pin holes; dimensions of the skiboot Interface Diese ?NORM ist anzuwenden für Skischuhe für
Cross country skiing; skiboots with three pin holes; dimensions of the skiboot Interface
Gross-country ski boots with three pin holes. Dimensions. interface and design
Cross-country ski boots with three pin holes. Demensions, interface and design