黑色金属上无磁性覆层和有色金属上非导电覆层的干膜检测

ASTM D7091-22 黑色金属用非磁性涂层和有色金属用非磁性非导电涂层干膜厚度的损测量

1.1 This practice describes the use of magnetic and eddy current gages for dry film thickness measurement. This practice is intended to supplement

Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

GB/T 4957-2003 非磁性基体金属上非导电覆盖层 覆盖层厚度测量 涡流法

本标准规定了使用涡流测厚仪损测量非磁性基体金属上非导电覆盖层厚度的方法。 本方法适用于测量大多数阳极氧化膜的厚度；但它不适用于一切的转化膜，有些转化膜因为太薄而不能用这种方法测量(见第7章)。 本方法理论上能测量磁性基体金属上覆盖层的厚度，但不予推荐。在这种情况下，应采用GB／T

Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness-Eddy current

GB/T 31554-2015 金属和非金属基体上非磁性金属覆盖层 覆盖层厚度测量 相敏涡流法

本标准规定了使用相敏涡流测厚仪损测量金属和非金属基体上非磁性金属覆盖层厚度的方法,如： a)钢铁基体上镀锌、镉、铜、锡或铬； b)复合材料基体上镀铜或银。 与GB/T 4957幅敏涡流法相比，相敏涡流法对较小表面和较大曲率表面的镀层厚度测量误差，同时，受基体的磁性影响更小，但相敏涡流法受

Non-magnetic metallic coatings on metallic and non-metallic basismaterials.Measurement of coating thickness.Phase-sensitive eddy-current method

DS/EN ISO 2360:1995 非磁性金属基体上的非导电覆盖层．覆盖层厚度测量．涡流法

Denne standard specificerer en metode, hvorved der anven-des lagtykkelsesm?lere med hvirvelstr?msprincip til ikke-destruktiv m?ling af lagtykkelsen af

Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy curent method

ASTM D7091-13 对应用于黑色金属的非磁性涂层以及应用于非黑色金属的非磁性, 不导电涂层的干膜厚度进行损测量的标准实施规程

4.1 This practice describes three operational steps necessary to ensure accurate coating

Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

ASTM D7091-12 应用于黑色金属的磁涂层和应用于有色金属的磁和不导电涂层的干膜厚度的损测量的标准操作规程

This practice describes three operational steps necessary to ensure accurate coating thickness measurement calibration, verification

Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

ASTM D7091-05 应用于黑色金属的磁涂层和应用于有色金属的磁和不导电涂层的干膜厚度的损测量的标准实施规程

Most specifications for commercial and industrial coatings projects stipulate a minimum and a maximum dry film thickness for each

Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

ASTM D1400-00 有色金属基底上非导电涂层干膜厚度的损测量的标准试验方法

1.1 This test method covers the nondestructive measurement of the dry film thickness of electrically nonconductive coatings applied over a nonferrous

Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base

WJ 461-1995 金属覆盖层.光学仪器用黑色金属氧化层规范

Metal coating. Specifications for ferrous metal oxidizing coatings of optical instrument

EN 14571:2005 非金属基底材料上金属覆层.覆层厚度的测量.微电阻率法

This document describes a method for nondestructive measurements of the thickness of conductive coatings on nonconductive base materials.This method

Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method

DIN EN 14571:2005 非金属基底材料上的金属覆层.测量覆层厚度.微电阻率法

Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method; German version EN 14571:2005

NF A91-321:2005 金属和非金属基材的非磁性金属覆层.覆层厚度测量.相敏涡流法

Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method.

BS EN ISO 21968:2005 金属和非金属基材的非磁性金属覆层.覆层厚度测量.相敏涡流法

This International Standard describes a method of using phase-sensitive eddy-current instruments for non-destructive measurements of the thickness

Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method

ISO 21968:2005 金属和非金属基材的非磁性金属覆层.覆层厚度测量.相敏涡流法

This International Standard describes a method of using phase-sensitive eddy-current instruments for non-destructive measurements of the thickness

Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method

BS EN 14571:2005 非金属基底材料上的金属覆层.覆层厚度的测量.微电阻率法

This document describes a method for nondestructive measurements of the thickness of conductive coatings on nonconductive base materials. This method

Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method

ASTM D7091-22 黑色金属用非磁性涂层和有色金属用非磁性非导电涂层干膜厚度的损测量

1.1 This practice describes the use of magnetic and eddy current gages for dry film thickness measurement. This practice is intended to supplement

Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

GB/T 4957-2003 非磁性基体金属上非导电覆盖层 覆盖层厚度测量 涡流法

本标准规定了使用涡流测厚仪损测量非磁性基体金属上非导电覆盖层厚度的方法。 本方法适用于测量大多数阳极氧化膜的厚度；但它不适用于一切的转化膜，有些转化膜因为太薄而不能用这种方法测量(见第7章)。 本方法理论上能测量磁性基体金属上覆盖层的厚度，但不予推荐。在这种情况下，应采用GB／T

Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness-Eddy current

GB/T 31554-2015 金属和非金属基体上非磁性金属覆盖层 覆盖层厚度测量 相敏涡流法

本标准规定了使用相敏涡流测厚仪损测量金属和非金属基体上非磁性金属覆盖层厚度的方法,如： a)钢铁基体上镀锌、镉、铜、锡或铬； b)复合材料基体上镀铜或银。 与GB/T 4957幅敏涡流法相比，相敏涡流法对较小表面和较大曲率表面的镀层厚度测量误差，同时，受基体的磁性影响更小，但相敏涡流法受

Non-magnetic metallic coatings on metallic and non-metallic basismaterials.Measurement of coating thickness.Phase-sensitive eddy-current method

DS/EN ISO 2360:1995 非磁性金属基体上的非导电覆盖层．覆盖层厚度测量．涡流法

Denne standard specificerer en metode, hvorved der anven-des lagtykkelsesm?lere med hvirvelstr?msprincip til ikke-destruktiv m?ling af lagtykkelsen af

Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy curent method

ASTM D7091-13 对应用于黑色金属的非磁性涂层以及应用于非黑色金属的非磁性, 不导电涂层的干膜厚度进行损测量的标准实施规程

4.1 This practice describes three operational steps necessary to ensure accurate coating

Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

ASTM D7091-12 应用于黑色金属的磁涂层和应用于有色金属的磁和不导电涂层的干膜厚度的损测量的标准操作规程

This practice describes three operational steps necessary to ensure accurate coating thickness measurement calibration, verification

Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

ASTM D7091-05 应用于黑色金属的磁涂层和应用于有色金属的磁和不导电涂层的干膜厚度的损测量的标准实施规程

Most specifications for commercial and industrial coatings projects stipulate a minimum and a maximum dry film thickness for each

Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

ASTM D1400-00 有色金属基底上非导电涂层干膜厚度的损测量的标准试验方法

1.1 This test method covers the nondestructive measurement of the dry film thickness of electrically nonconductive coatings applied over a nonferrous

Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base

WJ 461-1995 金属覆盖层.光学仪器用黑色金属氧化层规范

Metal coating. Specifications for ferrous metal oxidizing coatings of optical instrument

EN 14571:2005 非金属基底材料上金属覆层.覆层厚度的测量.微电阻率法

This document describes a method for nondestructive measurements of the thickness of conductive coatings on nonconductive base materials.This method

Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method

DIN EN 14571:2005 非金属基底材料上的金属覆层.测量覆层厚度.微电阻率法

Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method; German version EN 14571:2005

NF A91-321:2005 金属和非金属基材的非磁性金属覆层.覆层厚度测量.相敏涡流法

Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method.

BS EN ISO 21968:2005 金属和非金属基材的非磁性金属覆层.覆层厚度测量.相敏涡流法

This International Standard describes a method of using phase-sensitive eddy-current instruments for non-destructive measurements of the thickness

Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method

ISO 21968:2005 金属和非金属基材的非磁性金属覆层.覆层厚度测量.相敏涡流法

This International Standard describes a method of using phase-sensitive eddy-current instruments for non-destructive measurements of the thickness

Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method

BS EN 14571:2005 非金属基底材料上的金属覆层.覆层厚度的测量.微电阻率法

This document describes a method for nondestructive measurements of the thickness of conductive coatings on nonconductive base materials. This method

Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method