喷涂聚脲用层间处理剂检测

JC/T 2254-2014 喷涂聚脲用层间处理剂

本标准规定了喷涂聚脲用层间处理剂(简称JN处理剂)的标记、一般要求、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于喷涂聚脲涂料超过规定复涂时间再次施工时,对原聚脲防水层复涂面进行涂覆的处理剂

Lapping adhesive for spray polyurea layer agents

GB/T 23446-2009 喷涂聚脲防水涂料

本标准规定了喷涂聚脲防水涂料的术语和定义、分类和标记、一般要求、技术要求、试验方法、检验 规则、标志、包装、运输与贮存。 本标准适用于建设工程、基础设施防水用喷涂聚脲涂料

Spray polyurea waterproofing coating

JC/T 2252-2014 喷涂聚脲用底涂和腻子

本标准规定了喷涂聚脲用底涂和腻子的标记、一般要求、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于喷涂聚脲防水工程中水泥砂浆和混凝土基面用底涂和腻子

Primer and putty for spray polyurea coating

HG/T 3831-2006 喷涂聚脲防护材料

本标准规定了喷涂聚脲防护材料的分类、要求、试验方法、检验规则、标志、包装、运输和贮存等内容。 本标准适用于以端异氰酸酯基半预聚体、端氨基聚醚和胺扩链剂为基料 , 经高温高压撞击式混合设备喷涂而成的聚脲防护材料

Spray polyurea for materials protection

JGJ/T 200-2010 喷涂聚脲防水工程技术规程

本规程适用于混凝土和砂浆表面喷涂聚脲防水工程的材料选择、设计、施工及验收

Technical specification for spray polyurea waterproofing

T/CIATA 0033-2020 聚脲喷涂管道复合层耐蚀作业技术规范（试行）

本文件规定了聚脲喷涂管道复合层结构、材料、耐蚀作业、质量检验与规则、复合层修补、标识、验收、安全、卫生与环保等要求。 本文件适用于工作环境温度5℃～30℃，相对湿度≤85%,钢管表面温度≧露点温度3℃时聚脲喷涂管道复合层的耐蚀作业

Technical specification for corrosion resistance of polyurea pipe composite coating (For trial implementation)

NF A91-217*NF EN ISO 14924:2005 热喷涂 热喷涂层的后处理和加工

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings

ISO 14924:2005 热喷涂.热喷涂层的后处理和加工

This European Standard specifies the treatment and finishing of thermally sprayed coatings. It is applicable to different types of mechanical post

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings

DS/EN ISO 14924:2005 热喷涂 热喷涂涂层的后处理和精加工

This European Standard specifies the treatment and finishing of thermally sprayed coatings. It is applicable to different types of mechanical post

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings

DIN EN ISO 14924:2005-11 热喷涂 热喷涂涂层的后处理和精加工

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005); German version EN ISO 14924:2005

BS EN ISO 14924:2005(2018 热喷涂-热喷涂涂层的后处理和精加工

Thermal spraying - Post - treatment and finishing of thermally sprayed coatings

GB/T 43100-2023 热喷涂 热喷涂涂层的后处理和精加工

Thermal Spray Post-processing and finishing of thermal spray coatings

BS EN ISO 14924:2005 热喷涂.热喷涂覆层的后处理和精加工

ISO 14924:2005 specifies the treatment and finishing of thermally sprayed coatings. It is applicable to different types of mechanical post treatment

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings

DIN EN ISO 14924:2005 热喷涂.热喷涂覆层的后续处理和精整

This European Standard specifies the treatment and finishing of thermally sprayed coatings. It is applicable to different types of mechanical post

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005); English version of DIN EN ISO 14924:2005

KS F 4922-2007(2017 聚脲树脂的防水膜涂层

Polyurea resin waterproofing membrane coating

JC/T 2254-2014 喷涂聚脲用层间处理剂

本标准规定了喷涂聚脲用层间处理剂(简称JN处理剂)的标记、一般要求、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于喷涂聚脲涂料超过规定复涂时间再次施工时,对原聚脲防水层复涂面进行涂覆的处理剂

Lapping adhesive for spray polyurea layer agents

GB/T 23446-2009 喷涂聚脲防水涂料

本标准规定了喷涂聚脲防水涂料的术语和定义、分类和标记、一般要求、技术要求、试验方法、检验 规则、标志、包装、运输与贮存。 本标准适用于建设工程、基础设施防水用喷涂聚脲涂料

Spray polyurea waterproofing coating

JC/T 2252-2014 喷涂聚脲用底涂和腻子

本标准规定了喷涂聚脲用底涂和腻子的标记、一般要求、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于喷涂聚脲防水工程中水泥砂浆和混凝土基面用底涂和腻子

Primer and putty for spray polyurea coating

HG/T 3831-2006 喷涂聚脲防护材料

本标准规定了喷涂聚脲防护材料的分类、要求、试验方法、检验规则、标志、包装、运输和贮存等内容。 本标准适用于以端异氰酸酯基半预聚体、端氨基聚醚和胺扩链剂为基料 , 经高温高压撞击式混合设备喷涂而成的聚脲防护材料

Spray polyurea for materials protection

JGJ/T 200-2010 喷涂聚脲防水工程技术规程

本规程适用于混凝土和砂浆表面喷涂聚脲防水工程的材料选择、设计、施工及验收

Technical specification for spray polyurea waterproofing

T/CIATA 0033-2020 聚脲喷涂管道复合层耐蚀作业技术规范（试行）

本文件规定了聚脲喷涂管道复合层结构、材料、耐蚀作业、质量检验与规则、复合层修补、标识、验收、安全、卫生与环保等要求。 本文件适用于工作环境温度5℃～30℃，相对湿度≤85%,钢管表面温度≧露点温度3℃时聚脲喷涂管道复合层的耐蚀作业

Technical specification for corrosion resistance of polyurea pipe composite coating (For trial implementation)

NF A91-217*NF EN ISO 14924:2005 热喷涂 热喷涂层的后处理和加工

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings

ISO 14924:2005 热喷涂.热喷涂层的后处理和加工

This European Standard specifies the treatment and finishing of thermally sprayed coatings. It is applicable to different types of mechanical post

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings

DS/EN ISO 14924:2005 热喷涂 热喷涂涂层的后处理和精加工

This European Standard specifies the treatment and finishing of thermally sprayed coatings. It is applicable to different types of mechanical post

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings

BS EN ISO 14924:2005(2018 热喷涂-热喷涂涂层的后处理和精加工

Thermal spraying - Post - treatment and finishing of thermally sprayed coatings

DIN EN ISO 14924:2005-11 热喷涂 热喷涂涂层的后处理和精加工

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005); German version EN ISO 14924:2005

GB/T 43100-2023 热喷涂 热喷涂涂层的后处理和精加工

Thermal Spray Post-processing and finishing of thermal spray coatings

BS EN ISO 14924:2005 热喷涂.热喷涂覆层的后处理和精加工

ISO 14924:2005 specifies the treatment and finishing of thermally sprayed coatings. It is applicable to different types of mechanical post treatment

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings

DIN EN ISO 14924:2005 热喷涂.热喷涂覆层的后续处理和精整

This European Standard specifies the treatment and finishing of thermally sprayed coatings. It is applicable to different types of mechanical post

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005); English version of DIN EN ISO 14924:2005

KS F 4922-2007(2017 聚脲树脂的防水膜涂层

Polyurea resin waterproofing membrane coating