潮(湿)气固化聚氨酯涂料(单组分)检测

HG/T 2240-2012 潮（湿）气固化聚氨酯涂料（单组分）

本标准规定了潮(湿)气固化聚氨酯涂料(单组分)的分类、要求、试验方法、检验规则、标志、包装和贮存等内容。本标准适用于由含-NCO封端的多异氰酸酯预聚物、溶剂、助剂等制成的潮(湿)气固化涂料。该涂料主要用于木质、金属表面等的保护及装饰

Wet(moisture)cured polyurethane coatings(single package)

AS 3750.18:2002(R2013 钢结构涂料 湿气固化聚氨酯（单包装）系统

Specifies requirements and methods for the application of one-component, solvent-borne, moisture cure urethane paints intended to be used primarily

TIS 1343-2012 内墙用色湿固化聚氨酯涂料

Interior clear moisture.curing polyuretiiane coating

CGSB 1.176-2000-CAN/CGSB-2000 内墙用色湿固化聚氨酯涂料

La présente norme s’applique à un revêtement de polyuréthane non pigmenté, non huileux, contenant un polymère dont les cha?nes se terminent par un

Interior Clear Moisture-Curing Polyurethane Coating

SSPC PS 28.02-2010 三涂层湿固化聚氨酯涂料体系，基于性能

Three-Coat Moisture-Cured Polyurethane Coating System, Performance-Based

PS 28.02-2010 三层湿固化聚氨酯涂料体系 基于性能

This standard contains performance requirements for a coating system for steel substrates comprised of (1) a zinc-rich moisture-cured polyurethane

Three-Coat Moisture-Cured Polyurethane Coating System@ Performance-Based

T/SDDP 6-2022 全单组份湿固化聚氨酯弹性跑道施工规范

1    范围 2   规范性引用文件 3   术语和定义 4   标记 5   基本规定 6   

Construction specification for all one-component moisture-cured polyurethane elastic runway

FORD FLTM EU-BO 012-01-2001 聚氨酯材料在潮湿环境老化后的劣化

DETERIORATION OF POLYURETHANE MATERIALS AFTER HUMIDITY AGEING

ARMY MIL-DTL-53039 D-2011 涂料，脂肪族聚氨酯，单一组分，耐化学试剂

COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT

ARMY MIL-DTL-53039 E-2013 涂料，脂肪族聚氨酯，单一组分，耐化学试剂

COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT

PAINT 38-2003 单组分湿固化耐候脂肪族聚氨酯面漆 基于性能

Single-Component Moisture-Cure Weatherable Aliphatic Polyurethane Topcoat@ Performance-Based

PAINT 38-2006 单组分湿固化耐候脂肪族聚氨酯面漆 基于性能

This specification covers the requirements for a highperformance single-component moisture-curing UV-stable polyurethane topcoat (ASTM D 16@ Type II

Single-Component Moisture-Cure Weatherable Aliphatic Polyurethane Topcoat@ Performance-Based

GM 9984544-2004 用于聚氨酯（PUR）的室内涂料，单组分或双组分聚氨酯（由 GMN11014 替代）

Interior Paint, One or Two Component Urethane, for Polyurethane (PUR) (Replaced By GMN11014)

GM 9982242-1997 湿固化聚氨酯黏合剂

Die Dampfungsplatten müssen beim Einbau eine Temperatur von +23°C ± 5 K besitzen

Adhesive, Moisture Cure, Polyurethane, Headliner

ASTM D6947-06 喷涂聚氨酯泡沫屋顶系统用液态湿固化聚氨酯涂层的标准规范

1.1 This specification covers a single component, moisture cured, elastomeric urethane polymer coating used as a protective coating for spray

Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System

HG/T 2240-2012 潮（湿）气固化聚氨酯涂料（单组分）

本标准规定了潮(湿)气固化聚氨酯涂料(单组分)的分类、要求、试验方法、检验规则、标志、包装和贮存等内容。本标准适用于由含-NCO封端的多异氰酸酯预聚物、溶剂、助剂等制成的潮(湿)气固化涂料。该涂料主要用于木质、金属表面等的保护及装饰

Wet(moisture)cured polyurethane coatings(single package)

AS 3750.18:2002(R2013 钢结构涂料 湿气固化聚氨酯（单包装）系统

Specifies requirements and methods for the application of one-component, solvent-borne, moisture cure urethane paints intended to be used primarily

TIS 1343-2012 内墙用色湿固化聚氨酯涂料

Interior clear moisture.curing polyuretiiane coating

CGSB 1.176-2000-CAN/CGSB-2000 内墙用色湿固化聚氨酯涂料

La présente norme s’applique à un revêtement de polyuréthane non pigmenté, non huileux, contenant un polymère dont les cha?nes se terminent par un

Interior Clear Moisture-Curing Polyurethane Coating

SSPC PS 28.02-2010 三涂层湿固化聚氨酯涂料体系，基于性能

Three-Coat Moisture-Cured Polyurethane Coating System, Performance-Based

PS 28.02-2010 三层湿固化聚氨酯涂料体系 基于性能

This standard contains performance requirements for a coating system for steel substrates comprised of (1) a zinc-rich moisture-cured polyurethane

Three-Coat Moisture-Cured Polyurethane Coating System@ Performance-Based

T/SDDP 6-2022 全单组份湿固化聚氨酯弹性跑道施工规范

1    范围 2   规范性引用文件 3   术语和定义 4   标记 5   基本规定 6   

Construction specification for all one-component moisture-cured polyurethane elastic runway

FORD FLTM EU-BO 012-01-2001 聚氨酯材料在潮湿环境老化后的劣化

DETERIORATION OF POLYURETHANE MATERIALS AFTER HUMIDITY AGEING

ARMY MIL-DTL-53039 D-2011 涂料，脂肪族聚氨酯，单一组分，耐化学试剂

COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT

ARMY MIL-DTL-53039 E-2013 涂料，脂肪族聚氨酯，单一组分，耐化学试剂

COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT

PAINT 38-2003 单组分湿固化耐候脂肪族聚氨酯面漆 基于性能

Single-Component Moisture-Cure Weatherable Aliphatic Polyurethane Topcoat@ Performance-Based

PAINT 38-2006 单组分湿固化耐候脂肪族聚氨酯面漆 基于性能

This specification covers the requirements for a highperformance single-component moisture-curing UV-stable polyurethane topcoat (ASTM D 16@ Type II

Single-Component Moisture-Cure Weatherable Aliphatic Polyurethane Topcoat@ Performance-Based

GM 9984544-2004 用于聚氨酯（PUR）的室内涂料，单组分或双组分聚氨酯（由 GMN11014 替代）

Interior Paint, One or Two Component Urethane, for Polyurethane (PUR) (Replaced By GMN11014)

GM 9982242-1997 湿固化聚氨酯黏合剂

Die Dampfungsplatten müssen beim Einbau eine Temperatur von +23°C ± 5 K besitzen

Adhesive, Moisture Cure, Polyurethane, Headliner

ASTM D6947-06 喷涂聚氨酯泡沫屋顶系统用液态湿固化聚氨酯涂层的标准规范

1.1 This specification covers a single component, moisture cured, elastomeric urethane polymer coating used as a protective coating for spray

Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System