BS 3522:1962(1999 皮下手术安装针规范（鲁尔接头）
Specification for Hypodermic surgical mounted needles (Luer fitting)
GB/T 1962.2-2001 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第2部分;锁定接头
本标准规定了用于注射器、注射针及其他医疗器械（如输液设备）6%（鲁尔）圆锥锁定接头锁定接头的尺寸、要求、试验方法。 本标准的要求适用于刚性和半刚性的圆锥接头并包括了试验方法，但对较柔韧或有弹性的材料没有规定。 注 1 虽然要精确地定义刚性或半刚性材料的特性有一定
Conical fittings with a 6%(Luer)taper for syringes,needles and certain other medical equipment Part 2: Lock fittings
GB/T 1962.1-2015 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第1部分:通用要求
GB/T1962 的本部分规定了注射器、注射针及其他医疗器械6%%(和鲁尔)圆锥接头通用要求的尺寸、要求.试验方法。 本部分适用于刚性和半刚性的注射器、注射针及其他医疗器械6%(和鲁尔)圆锥接头通用要求(以下简称圆锥接头)。 不适用于较柔软的或弹性体材料制成的6%(鲁尔)圆锥接头。 图1 所示的是
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment.Part 1:General requirement
GB/T 1962.1-2001 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第1部分;通用要求
本标准规定了注射器、注射针及其他医疗器械6%（鲁尔）圆锥接头通用要求的尺寸、要求、试验方法。 本标准适用于刚性和半刚性的注射器、注射针及其他医疗器械6%（鲁尔）圆锥接头通用要求（以下简称圆锥接头）。不适用于较柔软的或弹性体材料制成的6%（鲁尔）圆锥接头。 注:虽然要精确地
The conical fittings with a6%(Luer)taper for syringes,needles and certain other medical equipment Part 1:General requirement
EN 1707:1996 注射器,针头和其它医疗器械用有6%鲁尔的锥形接头.锁紧接头
This European Standard specifies requirements for conical lock fittings with a 6 96 (Luer) taper for use with hypodermic syringes and needles
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings
ISO 594-2:1998 注射器、针头及其他医疗器械为6%(鲁尔)的锥形接头 第2部分:锁紧接头
This part of ISO 594 specifies requirements for conical lock fittings with a 6 % (Luer) taper for use with hypodermic syringes and needles
Conical fittings with 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 2: Lock fittings
NBN-EN 20594-1-1994 注射器，针筒和一些其他医疗器械的 6 %（鲁尔）锥形接头．第1部分：一般说明（ISO 594：1：1986）
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment. Part 1: General requirements (ISO 594-1:1986)
ISO 594-1:1986 注射器、针头及其他医疗器械为6%(鲁尔)的锥形接头 第1部分:一般要求
Specification of the requirements for conical (Luer) fittings for use with hyperdemic syringes and needles and with certain other apparatus
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment; Part 1 : General requirements
DS/EN 1707:1997 用于注射器、针头和某些其他医疗设备的锥度为 6%（鲁尔）的锥形接头 锁紧接头
The standard specifies requirements for conical lock fittings with 6% (Luer) taper for use with hypodermic syringes and needles and with certain other
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings
NP EN 20594-1-1999 用6％（鲁尔）圆锥接头锥的注射器，注射针以及其它医疗类圆锥型设备．第1部分：一般要求（ISO 594-1－1986）
A presente parte de Norma especifica os requisitos para as adapta??es cónicas de 6 % (Luer) das seringas e agulhas e outros equipamentos de uso médico
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medicai equipment Part 1: General requirements (ISO 594-1:1986)
DS/EN 20594-1/A1:1998 用于注射器、针头和某些其他医疗设备的锥度为 6%（鲁尔）的锥形接头 第1部分：一般要求
This part of the Standard specifies requirements for conical fittings with a 6 % Luer taper for use with hypodermic syringes and needles
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements
LST EN 20594-1+AC+A1-2000 用于注射器、针头和某些其他医疗设备的锥度为 6%（鲁尔）的锥形接头 第1部分：一般要求（ISO 594-1:1986）
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986)
UNE-EN 20594-1/A1:1998 用于注射器、针头和某些其他医疗设备的锥度为 6%（鲁尔）的锥形接头 第1部分：一般要求（ISO 594-1:1986）
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986)
UNE-EN 20594-1:1994 用于注射器、针头和某些其他医疗设备的锥度为 6%（鲁尔）的锥形接头 第1部分：一般要求（ISO 594-1:1986）
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986)
DS/ISO 594-2:1992 注射器，针头和其他某些医疗器械6％（鲁尔）锥度的锥形接头．第2部分：锁配件
This part of ISO 594 specifies requirements for conical lock fittings with a 6 % (Luer) taper for use with hypodermic syringes and needles
Conical fittings with a 6%(Luer) taper for syinges,needles and certain other medical equipment.Part 2: Lock fittings
BS 3522:1962(1999 皮下手术安装针规范（鲁尔接头）
Specification for Hypodermic surgical mounted needles (Luer fitting)
GB/T 1962.2-2001 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第2部分;锁定接头
本标准规定了用于注射器、注射针及其他医疗器械（如输液设备）6%（鲁尔）圆锥锁定接头锁定接头的尺寸、要求、试验方法。 本标准的要求适用于刚性和半刚性的圆锥接头并包括了试验方法，但对较柔韧或有弹性的材料没有规定。 注 1 虽然要精确地定义刚性或半刚性材料的特性有一定
Conical fittings with a 6%(Luer)taper for syringes,needles and certain other medical equipment Part 2: Lock fittings
GB/T 1962.1-2015 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第1部分:通用要求
GB/T1962 的本部分规定了注射器、注射针及其他医疗器械6%%(和鲁尔)圆锥接头通用要求的尺寸、要求.试验方法。 本部分适用于刚性和半刚性的注射器、注射针及其他医疗器械6%(和鲁尔)圆锥接头通用要求(以下简称圆锥接头)。 不适用于较柔软的或弹性体材料制成的6%(鲁尔)圆锥接头。 图1 所示的是
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment.Part 1:General requirement
GB/T 1962.1-2001 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第1部分;通用要求
本标准规定了注射器、注射针及其他医疗器械6%（鲁尔）圆锥接头通用要求的尺寸、要求、试验方法。 本标准适用于刚性和半刚性的注射器、注射针及其他医疗器械6%（鲁尔）圆锥接头通用要求（以下简称圆锥接头）。不适用于较柔软的或弹性体材料制成的6%（鲁尔）圆锥接头。 注:虽然要精确地
The conical fittings with a6%(Luer)taper for syringes,needles and certain other medical equipment Part 1:General requirement
EN 1707:1996 注射器,针头和其它医疗器械用有6%鲁尔的锥形接头.锁紧接头
This European Standard specifies requirements for conical lock fittings with a 6 96 (Luer) taper for use with hypodermic syringes and needles
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings
ISO 594-2:1998 注射器、针头及其他医疗器械为6%(鲁尔)的锥形接头 第2部分:锁紧接头
This part of ISO 594 specifies requirements for conical lock fittings with a 6 % (Luer) taper for use with hypodermic syringes and needles
Conical fittings with 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 2: Lock fittings
NBN-EN 20594-1-1994 注射器，针筒和一些其他医疗器械的 6 %（鲁尔）锥形接头．第1部分：一般说明（ISO 594：1：1986）
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment. Part 1: General requirements (ISO 594-1:1986)
ISO 594-1:1986 注射器、针头及其他医疗器械为6%(鲁尔)的锥形接头 第1部分:一般要求
Specification of the requirements for conical (Luer) fittings for use with hyperdemic syringes and needles and with certain other apparatus
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment; Part 1 : General requirements
DS/EN 1707:1997 用于注射器、针头和某些其他医疗设备的锥度为 6%（鲁尔）的锥形接头 锁紧接头
The standard specifies requirements for conical lock fittings with 6% (Luer) taper for use with hypodermic syringes and needles and with certain other
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings
NP EN 20594-1-1999 用6％（鲁尔）圆锥接头锥的注射器，注射针以及其它医疗类圆锥型设备．第1部分：一般要求（ISO 594-1－1986）
A presente parte de Norma especifica os requisitos para as adapta??es cónicas de 6 % (Luer) das seringas e agulhas e outros equipamentos de uso médico
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medicai equipment Part 1: General requirements (ISO 594-1:1986)
DS/EN 20594-1/A1:1998 用于注射器、针头和某些其他医疗设备的锥度为 6%（鲁尔）的锥形接头 第1部分：一般要求
This part of the Standard specifies requirements for conical fittings with a 6 % Luer taper for use with hypodermic syringes and needles
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements
LST EN 20594-1+AC+A1-2000 用于注射器、针头和某些其他医疗设备的锥度为 6%（鲁尔）的锥形接头 第1部分：一般要求（ISO 594-1:1986）
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986)
UNE-EN 20594-1/A1:1998 用于注射器、针头和某些其他医疗设备的锥度为 6%（鲁尔）的锥形接头 第1部分：一般要求（ISO 594-1:1986）
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986)
UNE-EN 20594-1:1994 用于注射器、针头和某些其他医疗设备的锥度为 6%（鲁尔）的锥形接头 第1部分：一般要求（ISO 594-1:1986）
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986)
DS/ISO 594-2:1992 注射器，针头和其他某些医疗器械6％（鲁尔）锥度的锥形接头．第2部分：锁配件
This part of ISO 594 specifies requirements for conical lock fittings with a 6 % (Luer) taper for use with hypodermic syringes and needles
Conical fittings with a 6%(Luer) taper for syinges,needles and certain other medical equipment.Part 2: Lock fittings
编辑：北检院编辑部
