高强度挤塑板检测

HB 7070-1994 纤维增强塑料层合板挤压强度试验方法

本标准规定了多向对称铺设纤维增强塑料层合板挤压强度试验方法的术语、试样及其制备、试验设备、试验步骤和计算。 　　本标准适用于测定多向对称铺设纤维增强塑料层合板的挤压强度

Test method for extrusion strength of fiber reinforced plastic laminates

SAE AMS3657C-1993 烧结的高强度聚四氟乙烯挤塑材料

This specification covers one grade of polytetrafluoroethylene in the form of extruded and sintered rods, tubes, and shapes. These products have been

Polytetrafluoroethylene Extrusions, Premium Strength, As Sintered

SAE AMS3657D-2008 烧结的高强度聚四氟乙烯(PTFE)挤塑材料

This specification covers one grade of polytetrafluoroethylene in the form of extruded and sintered rods, tubes, and shapes. These products have been

Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered

GB/T 7559-1987 纤维增强塑料层板螺栓连接挤压强度试验方法

本方法用于测定碳纤维、玻璃纤维增强塑料层板在常温静载下螺栓连接的挤压强度。测试可采用拉伸型或压缩型加载方式

FRP Laminates-test method for bearing strength by bolted joints

GB/T 7559-2005 纤维增强塑料层合板 螺栓连接挤压强度试验方法

本标准规定了纤维增强塑料层合板螺栓连接挤压强度试验的试样、试验设备、试验条件、试验步骤、计算公式、试验结果和试验报告。 本标准适用于碳纤维、玻璃纤维、芳纺纤维等增强塑料层合板在常温静载下螺栓连接挤压强度的测试

Test method for bearing strength by bolted joints of fiber reinforced plastics laminates

BS F 157:2006 高抗扯强度硅酮橡胶板、模和挤压的特性.规范

This British Standard specifies requirements for silicone rubber material with excellent ozone resistance properties intended for the production

Properties of high tear strength silicone rubber sheet, mouldings and extrusions - Specification

T/ZZB 1458-2019 高强度注塑鞋跟

本标准规定了高强度塑料鞋跟的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本标准适用于以塑料为主体材质，跟后高≥40 mm的注塑成型女式鞋跟（以下简称鞋跟

High-strength injection-molded heel

T/SHLX 001-2023 高强度铝合金热挤压模具

1、确定了高强度铝合金热挤压模具的各类模具的类型、模具结构、适用产品以及使用模具钢牌号。 2、明确了高强度铝合金热挤压模具使用的材料成分。 3、阐述了高强度铝合金热挤压模具的设计具体要求、模具结构设计考虑的主要因素、模孔设计的重要原则、模拟挤压验证的要求和操作、模具制造的主要影响因素。 4、对

Hot Extrusion Die Used For High Strength Aluminum Alloy

DIN 52366:1996 木屑板.挤压板层间粘结强度测定

The durability of laminations on extruded particle boards is particularly determined by the strength of the bond between base board and lamination

Particle boards - Determination of internal bond of layers of extruded boards

T/NHXY 9-2022 高强度注塑鞋跟

规定了高强度注塑鞋跟的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存

High strength injection molded heel

SAE AMS3659C-1993 烧结的和应力消除的高强度聚四氟乙烯挤塑材料

This specification covers virgin, unfilled polytetrafluoroethylene resin in the form of extruded rods, tubes, and shapes. These products have been

Polytetrafluoroethylene Extrusions, Premium Strength, Sintered and Stress-Relieved

GOST 20683-1997 纸板.端面挤压强度的测定方法

Container board. Method for determination of edgewise crush resistance (unwaxed edge method)

BULLETIN 79-1962 焊接超高强度钢板

Interest in the welding of ultra high strength steel sheet has been generated within the last several years by the requirement of the rocket motor

WELDING ULTRA HIGH STRENGTH STEEL SHEET

ISO/CD 75-3 塑料《载荷变形温度的测定》第3部分：高强度热固性层压板和长纤维增强塑料

Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics

prEN ISO 75-3 rev 塑料《载荷变形温度的测定》第3部分：高强度热固性层压板和长纤维增强塑料

ISO 75-3:2004 specifies a method for the determination of the temperature of deflection under load of high-strength thermosetting laminates

Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics

HB 7070-1994 纤维增强塑料层合板挤压强度试验方法

本标准规定了多向对称铺设纤维增强塑料层合板挤压强度试验方法的术语、试样及其制备、试验设备、试验步骤和计算。 　　本标准适用于测定多向对称铺设纤维增强塑料层合板的挤压强度

Test method for extrusion strength of fiber reinforced plastic laminates

SAE AMS3657C-1993 烧结的高强度聚四氟乙烯挤塑材料

This specification covers one grade of polytetrafluoroethylene in the form of extruded and sintered rods, tubes, and shapes. These products have been

Polytetrafluoroethylene Extrusions, Premium Strength, As Sintered

SAE AMS3657D-2008 烧结的高强度聚四氟乙烯(PTFE)挤塑材料

This specification covers one grade of polytetrafluoroethylene in the form of extruded and sintered rods, tubes, and shapes. These products have been

Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered

GB/T 7559-1987 纤维增强塑料层板螺栓连接挤压强度试验方法

本方法用于测定碳纤维、玻璃纤维增强塑料层板在常温静载下螺栓连接的挤压强度。测试可采用拉伸型或压缩型加载方式

FRP Laminates-test method for bearing strength by bolted joints

GB/T 7559-2005 纤维增强塑料层合板 螺栓连接挤压强度试验方法

本标准规定了纤维增强塑料层合板螺栓连接挤压强度试验的试样、试验设备、试验条件、试验步骤、计算公式、试验结果和试验报告。 本标准适用于碳纤维、玻璃纤维、芳纺纤维等增强塑料层合板在常温静载下螺栓连接挤压强度的测试

Test method for bearing strength by bolted joints of fiber reinforced plastics laminates

BS F 157:2006 高抗扯强度硅酮橡胶板、模和挤压的特性.规范

This British Standard specifies requirements for silicone rubber material with excellent ozone resistance properties intended for the production

Properties of high tear strength silicone rubber sheet, mouldings and extrusions - Specification

T/ZZB 1458-2019 高强度注塑鞋跟

本标准规定了高强度塑料鞋跟的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本标准适用于以塑料为主体材质，跟后高≥40 mm的注塑成型女式鞋跟（以下简称鞋跟

High-strength injection-molded heel

T/SHLX 001-2023 高强度铝合金热挤压模具

1、确定了高强度铝合金热挤压模具的各类模具的类型、模具结构、适用产品以及使用模具钢牌号。 2、明确了高强度铝合金热挤压模具使用的材料成分。 3、阐述了高强度铝合金热挤压模具的设计具体要求、模具结构设计考虑的主要因素、模孔设计的重要原则、模拟挤压验证的要求和操作、模具制造的主要影响因素。 4、对

Hot Extrusion Die Used For High Strength Aluminum Alloy

DIN 52366:1996 木屑板.挤压板层间粘结强度测定

The durability of laminations on extruded particle boards is particularly determined by the strength of the bond between base board and lamination

Particle boards - Determination of internal bond of layers of extruded boards

T/NHXY 9-2022 高强度注塑鞋跟

规定了高强度注塑鞋跟的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存

High strength injection molded heel

SAE AMS3659C-1993 烧结的和应力消除的高强度聚四氟乙烯挤塑材料

This specification covers virgin, unfilled polytetrafluoroethylene resin in the form of extruded rods, tubes, and shapes. These products have been

Polytetrafluoroethylene Extrusions, Premium Strength, Sintered and Stress-Relieved

GOST 20683-1997 纸板.端面挤压强度的测定方法

Container board. Method for determination of edgewise crush resistance (unwaxed edge method)

BULLETIN 79-1962 焊接超高强度钢板

Interest in the welding of ultra high strength steel sheet has been generated within the last several years by the requirement of the rocket motor

WELDING ULTRA HIGH STRENGTH STEEL SHEET

ISO/CD 75-3 塑料《载荷变形温度的测定》第3部分：高强度热固性层压板和长纤维增强塑料

Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics

prEN ISO 75-3 rev 塑料《载荷变形温度的测定》第3部分：高强度热固性层压板和长纤维增强塑料

ISO 75-3:2004 specifies a method for the determination of the temperature of deflection under load of high-strength thermosetting laminates

Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics