服务热线:400-635-0567

通信设备鉴别与保密检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

SJ 20924-2005 息安全结构计要求

本标准规定了保密通信与信息安全设备(以下简称设备)结构设计的基本要求。 本标准适用于军用地面、舰载和机载保密通信与信息安全设备的论证、设计、制造及验收,非军用设备亦可参照执行

Requirements for physical design of secure communication and information security equipment

T/WAPIA 045.2-2021 息技术 系统间远程息交换 原子钥建立实体 第2部分:轻量级原子钥建立实体

本文件规定了轻量级原子实体鉴别与密钥建立(AKEA-L1),可以封装于扩展封装协议(Extensible Encapsulation Protocol,EEP),实现实体间通信和信息交换(TIE)的密钥协商和确认。本文件还规定了使用ECDH及SM2密钥协商算法的密码机制

Information technology - Telecommunications and information exchange between systems - Atomic key establishment and entity authentication - Part 2:Light-weight atomic key establishment and entity authentication

T/WAPIA 045.6-2021 息技术 系统间远程息交换 原子钥建立实体 第6部分:三元移动系统安全—基于对称钥的原子钥建立实体

本文件规定了原子密钥建立与实体鉴别(AKEA)的子协议-三元对等移动通信系统安全-基于对称密钥的密钥建立与实体鉴别(TMSS-S),可以封装于扩展封装协议(EEP),用以支持实体间通信和信息交换(TIE)的密钥建立与实体鉴别和确认机制

Information technology - Telecommunications and information exchange between systems - Atomic key establishment and entity authentication - Part 6:Tri-element mobile system security(TMSS) - Atomic key establishment and entity authentication based on symme

T/WAPIA 045.4-2021 息技术 系统间远程息交换 原子钥建立实体 第4 部分:采用预共享钥的原子钥建立实体

本文件规定了原子密钥建立与实体鉴别(AKEA)的子协议-采用预共享密钥的原子密钥建立与实体鉴别(简称AKEA-P),可封装于扩展封装协议(EEP),用以支持实体间通信和信息交换(TIE)的密钥协商和确认机制

Information technology - Telecommunications and information exchangebetween systems - Atomic key establishment and entity authentication -Part 4:Atomic key establisment and entity authentication usingper-shared key

T/WAPIA 045.3-2021 息技术 系统间远程息交换 原子钥建立实体 第3部分:采用证书的原子钥建立实体

本文件规定了采用证书的原子密钥建立与实体鉴别协议(AKEA-C),它是原子密钥建立与实体鉴别(AKEA)的子协议,封装于扩展封装协议(EEP),用以支持实体间通信和信息交换(TIE)鉴别的密钥协商和确认机制

Information technology - Telecommunications and information exchange between systems - Atomic key establishment and entity authentication - Part 3: Atomic key establishment and entity authentication using certificates

T/WAPIA 045.5-2021 息技术 系统间远程息交换 原子钥建立实体 第5部分:采用预共享证书组合的原子钥建立实体

本文件规定了原子密钥建立与实体鉴别(AKEA)的子协议-采用预共享密钥与证书组合的密钥建立与实体鉴别(AKEA-M),即实体一端采用数字证书、一端采用预共享密钥的密钥建立与实体鉴别,可以封装于扩展封装协议(EEP),用以支持实体间通信和信息交换(TIE)的密钥协商和确认机制

Information technology - Telecommunications and information exchange between systems - Atomic key establishment and entity authentication - Part 5:Atomic key establishment and entity authentication mechanisms using pre-shared key mixed with certificate

T/WAPIA 045.7-2021 息技术 系统间远程息交换 原子钥建立实体 第7部分:三元移动系统安全—基于非对称钥的原子钥建立实体

本文件规定了原子密钥建立与实体鉴别(AKEA)的子协议-基于三元对等移动通信系统安全-基于非对称密钥的密钥建立与实体鉴别(TMSS-A),可以封装于扩展封装协议(EEP),用以支持实体间通信和信息交换(TIE)的密钥建立与实体鉴别和确认机制

Information technology - Telecommunications and information exchange between systems - Atomic key establishment and entity authentication - Part 7:Tri-element mobile system security(TMSS) - Atomic key establishment and entity authentication based on asymm

ONORM M 7600 Teil.2-1980 和空调.基本规则.图形符号,字母和颜色

Die in dieser ?NORM festgelegten Sinnbilder, Kennbuchstaben und Kennfarben sind für die wesentlichen Bauelemente in Schaltbildern von l

Ventilations and air conditioning plants; Basic rules; Graphical Symbols, identifying letters and identifying colours

BS ISO 24534-5:2013 智能运输系统.车辆的自动识.车辆的电子注册识(ERI).用对称技术的

Intelligent transport systems. Automatic vehicle and equipment identification. Electronic Registration Identification (ERI) for vehicles. Secure communications using symmetrical techniques

DD ENV 12251-2001 健康息学.健用安全用户识.利用口令的管理和

Health informatics. Secure user identification for health care. Management and security of authentication by passwords

BS ISO/IEC 9798-4:1999 息技术.技术.实体.用码校验函数的机制

Information technology. Security techniques. Entity authentication. Mechanisms using a cryptographic check function

EN ISO 24534-4:2010 机动车辆和定.机动车辆电子登记识(ERI).第4部分:利用非对称技术的

This part of ISO 24534 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle

Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (Incorporates Amendment A1: 2019)

KS X ISO 24534-4:2007 机动车辆和定.机动车辆电子登记识(ERI).第4部分:利用非对称技术的

? ??? ??? ??? ??? ???? ???? ?? ???? ?? ?? ?? ??(ER

Automatic vehicle and equipment identification-Electronic Registration Identification(ERI) for vehicles-Part 4:Secure communications using asymmetrical techniques

ISO 24534-4:2010 机动车辆和定.机动车辆电子登记识(ERI).第4部分:利用非对称技术的

This part of ISO 24534 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle

Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques

GB/T 32213-2015 息安全技术 公钥基础施 远程口令钥建立规范

本标准定义了基于非对称密码技术实现远程口令鉴别与密钥建立的数学定义和协议构造。 本标准适用于采用基于口令鉴别与密钥建立技术的鉴别系统的设计和开发

Information security technology.Public key infrastructure.Specification for remote password authentication and key establishment

SJ 20924-2005 息安全结构计要求

本标准规定了保密通信与信息安全设备(以下简称设备)结构设计的基本要求。 本标准适用于军用地面、舰载和机载保密通信与信息安全设备的论证、设计、制造及验收,非军用设备亦可参照执行

Requirements for physical design of secure communication and information security equipment

T/WAPIA 045.2-2021 息技术 系统间远程息交换 原子钥建立实体 第2部分:轻量级原子钥建立实体

本文件规定了轻量级原子实体鉴别与密钥建立(AKEA-L1),可以封装于扩展封装协议(Extensible Encapsulation Protocol,EEP),实现实体间通信和信息交换(TIE)的密钥协商和确认。本文件还规定了使用ECDH及SM2密钥协商算法的密码机制

Information technology - Telecommunications and information exchange between systems - Atomic key establishment and entity authentication - Part 2:Light-weight atomic key establishment and entity authentication

T/WAPIA 045.6-2021 息技术 系统间远程息交换 原子钥建立实体 第6部分:三元移动系统安全—基于对称钥的原子钥建立实体

本文件规定了原子密钥建立与实体鉴别(AKEA)的子协议-三元对等移动通信系统安全-基于对称密钥的密钥建立与实体鉴别(TMSS-S),可以封装于扩展封装协议(EEP),用以支持实体间通信和信息交换(TIE)的密钥建立与实体鉴别和确认机制

Information technology - Telecommunications and information exchange between systems - Atomic key establishment and entity authentication - Part 6:Tri-element mobile system security(TMSS) - Atomic key establishment and entity authentication based on symme

T/WAPIA 045.4-2021 息技术 系统间远程息交换 原子钥建立实体 第4 部分:采用预共享钥的原子钥建立实体

本文件规定了原子密钥建立与实体鉴别(AKEA)的子协议-采用预共享密钥的原子密钥建立与实体鉴别(简称AKEA-P),可封装于扩展封装协议(EEP),用以支持实体间通信和信息交换(TIE)的密钥协商和确认机制

Information technology - Telecommunications and information exchangebetween systems - Atomic key establishment and entity authentication -Part 4:Atomic key establisment and entity authentication usingper-shared key

T/WAPIA 045.3-2021 息技术 系统间远程息交换 原子钥建立实体 第3部分:采用证书的原子钥建立实体

本文件规定了采用证书的原子密钥建立与实体鉴别协议(AKEA-C),它是原子密钥建立与实体鉴别(AKEA)的子协议,封装于扩展封装协议(EEP),用以支持实体间通信和信息交换(TIE)鉴别的密钥协商和确认机制

Information technology - Telecommunications and information exchange between systems - Atomic key establishment and entity authentication - Part 3: Atomic key establishment and entity authentication using certificates

T/WAPIA 045.5-2021 息技术 系统间远程息交换 原子钥建立实体 第5部分:采用预共享证书组合的原子钥建立实体

本文件规定了原子密钥建立与实体鉴别(AKEA)的子协议-采用预共享密钥与证书组合的密钥建立与实体鉴别(AKEA-M),即实体一端采用数字证书、一端采用预共享密钥的密钥建立与实体鉴别,可以封装于扩展封装协议(EEP),用以支持实体间通信和信息交换(TIE)的密钥协商和确认机制

Information technology - Telecommunications and information exchange between systems - Atomic key establishment and entity authentication - Part 5:Atomic key establishment and entity authentication mechanisms using pre-shared key mixed with certificate

T/WAPIA 045.7-2021 息技术 系统间远程息交换 原子钥建立实体 第7部分:三元移动系统安全—基于非对称钥的原子钥建立实体

本文件规定了原子密钥建立与实体鉴别(AKEA)的子协议-基于三元对等移动通信系统安全-基于非对称密钥的密钥建立与实体鉴别(TMSS-A),可以封装于扩展封装协议(EEP),用以支持实体间通信和信息交换(TIE)的密钥建立与实体鉴别和确认机制

Information technology - Telecommunications and information exchange between systems - Atomic key establishment and entity authentication - Part 7:Tri-element mobile system security(TMSS) - Atomic key establishment and entity authentication based on asymm

ONORM M 7600 Teil.2-1980 和空调.基本规则.图形符号,字母和颜色

Die in dieser ?NORM festgelegten Sinnbilder, Kennbuchstaben und Kennfarben sind für die wesentlichen Bauelemente in Schaltbildern von l

Ventilations and air conditioning plants; Basic rules; Graphical Symbols, identifying letters and identifying colours

BS ISO 24534-5:2013 智能运输系统.车辆的自动识.车辆的电子注册识(ERI).用对称技术的

Intelligent transport systems. Automatic vehicle and equipment identification. Electronic Registration Identification (ERI) for vehicles. Secure communications using symmetrical techniques

DD ENV 12251-2001 健康息学.健用安全用户识.利用口令的管理和

Health informatics. Secure user identification for health care. Management and security of authentication by passwords

BS ISO/IEC 9798-4:1999 息技术.技术.实体.用码校验函数的机制

Information technology. Security techniques. Entity authentication. Mechanisms using a cryptographic check function

EN ISO 24534-4:2010 机动车辆和定.机动车辆电子登记识(ERI).第4部分:利用非对称技术的

This part of ISO 24534 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle

Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (Incorporates Amendment A1: 2019)

KS X ISO 24534-4:2007 机动车辆和定.机动车辆电子登记识(ERI).第4部分:利用非对称技术的

? ??? ??? ??? ??? ???? ???? ?? ???? ?? ?? ?? ??(ER

Automatic vehicle and equipment identification-Electronic Registration Identification(ERI) for vehicles-Part 4:Secure communications using asymmetrical techniques

ISO 24534-4:2010 机动车辆和定.机动车辆电子登记识(ERI).第4部分:利用非对称技术的

This part of ISO 24534 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle

Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques

GB/T 32213-2015 息安全技术 公钥基础施 远程口令钥建立规范

本标准定义了基于非对称密码技术实现远程口令鉴别与密钥建立的数学定义和协议构造。 本标准适用于采用基于口令鉴别与密钥建立技术的鉴别系统的设计和开发

Information security technology.Public key infrastructure.Specification for remote password authentication and key establishment

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询