热固性粉末涂料用双酚A型环氧树脂检测

GB/T 27809-2011 热固性粉末涂料用双酚A型环氧树脂

本标准规定了热固性粉末涂料用双酚〈型环氧树脂的产品分类和分等、要求、试验方法、检验规则以及标志、包装和贮存的要求”本标准适用于双酚A型环氧树脂。 产品用于热固性环氧粉末涂料和环氧聚酯粉末涂料的制造

Bisphenol A epoxy resins for thermosetting powder coatings

GB/T 13657-2011 双酚A型环氧树脂

本标准规定了双酚A型环氧树脂的代表型号及其主要用途、要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于双酚A型环氧树脂。 本标准不适用于含固化剂及含溶剂的双酚A型环氧树脂

Bisphenol-A epoxy resin

GB/T 13657-1992 双酚-A型环氧树脂

本标准规定了双酚-A型环氧树脂的技术要求、试验方法、检验规则以及标志、包装、运输和贮存的要求。 本标准适用于双酚-A型环氧树脂。 本标准不适用于含固化剂的双酚-A型环氧树脂

Bisphenol-A epoxy resins

SAE AMS3143-1999 粉末涂料 环氧树脂

Powder Coating Materials@ Epoxy

SAE AMS3731/4A-2011 灌封料，环氧双酚 A 型浸渍树脂，热固化，单组分

This specification covers a single component epoxy resin formulation requiring an oven cure for attainment of maximun properties

POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component

SAE AMS3731/4-1981 灌封料，环氧双酚 A 型浸渍树脂，热固化，单组分

This specification covers a single component epoxy resin formulation requiring an oven cure for attainment of maximum properties

POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component

GB/T 27808-2011 热固性粉末涂料用饱和聚酯树脂

本标准规定了热固性粉末涂料用饱和聚酯树脂的术语及定义、产品分类、要求、试验方法、检验规则和标志、包装、贮存。 本标准适用于由多元羧酸(或酸酐)、多元醇等经缩聚反应制得的热固性饱和聚酯树脂,产品用于环氧聚酯粉末涂料、纯聚酯粉末涂料和聚氨酯粉末涂料的制造

Saturated polyester resins for thermosetting powder coatings

SAE AMS3143A-2003 环氧树脂粉末涂层材料

This specification covers epoxy coating material in powder form. This product is typically used on electrically conductive metal surfaces without

Powder Coating Materials, Epoxy

SAE AMS3731/4C-2016 灌封胶 环氧双酚A型浸渍树脂 热固化 单组分

Form: This specification covers a single component epoxy resin formulation requiring an oven cure for attainment of maximum properties Application

Potting Compound@ Epoxy Bisphenol A-Type Impregnating Resin@ Heat Cure@ Single Component

SAE AMS3731/4B-1993 （非现行）灌封料，环氧双酚 A 型浸渍树脂，热固化，单组分

This specification covers a single component epoxy resin formulation requiring an oven cure for attainment of maximum properties

(Noncurrent)Potting Compound, Epoxy Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component

BS EN ISO 8130-8:1995 粉末涂料 热固性树脂粉末的储藏稳定性评价

Coating powders. Assessment of the storage stability of thermosetting powders

BS EN ISO 8130-8:2010 粉末涂料.热固性树脂粉末的储藏稳定性评价

This part of ISO 8130 deals with the estimation of the storage stability of thermosetting coating powders. It specifies the procedures

Coating powders. Assessment of the storage stability of thermosetting powders

NF F19-477:1991 铁路车辆.聚酯树脂热固性粉末涂料

Railway rolling stock. Thermo setting powder paints made of polyester resins.

ISO 14656:1999 钢筋混凝土用环氧树脂涂层钢的环氧树脂粉末和密封材料

This International Standard specifies requirements for epoxy powders for use in preparing fusion-bonded epoxy-coated steel reinforcing bar, wire

Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

FORD ESF-M70J1-A-2011 热固环氧粉末涂料***与福特WSS-M99P1111-A***一起使用

PAINT, POWDERED, THERMOSETTING EPOXY ***TO BE USED WITH FORD WSS-M99P1111-A***

GB/T 27809-2011 热固性粉末涂料用双酚A型环氧树脂

本标准规定了热固性粉末涂料用双酚〈型环氧树脂的产品分类和分等、要求、试验方法、检验规则以及标志、包装和贮存的要求”本标准适用于双酚A型环氧树脂。 产品用于热固性环氧粉末涂料和环氧聚酯粉末涂料的制造

Bisphenol A epoxy resins for thermosetting powder coatings

GB/T 13657-2011 双酚A型环氧树脂

本标准规定了双酚A型环氧树脂的代表型号及其主要用途、要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于双酚A型环氧树脂。 本标准不适用于含固化剂及含溶剂的双酚A型环氧树脂

Bisphenol-A epoxy resin

GB/T 13657-1992 双酚-A型环氧树脂

本标准规定了双酚-A型环氧树脂的技术要求、试验方法、检验规则以及标志、包装、运输和贮存的要求。 本标准适用于双酚-A型环氧树脂。 本标准不适用于含固化剂的双酚-A型环氧树脂

Bisphenol-A epoxy resins

SAE AMS3143-1999 粉末涂料 环氧树脂

Powder Coating Materials@ Epoxy

SAE AMS3731/4A-2011 灌封料，环氧双酚 A 型浸渍树脂，热固化，单组分

This specification covers a single component epoxy resin formulation requiring an oven cure for attainment of maximun properties

POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component

SAE AMS3731/4-1981 灌封料，环氧双酚 A 型浸渍树脂，热固化，单组分

This specification covers a single component epoxy resin formulation requiring an oven cure for attainment of maximum properties

POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component

GB/T 27808-2011 热固性粉末涂料用饱和聚酯树脂

本标准规定了热固性粉末涂料用饱和聚酯树脂的术语及定义、产品分类、要求、试验方法、检验规则和标志、包装、贮存。 本标准适用于由多元羧酸(或酸酐)、多元醇等经缩聚反应制得的热固性饱和聚酯树脂,产品用于环氧聚酯粉末涂料、纯聚酯粉末涂料和聚氨酯粉末涂料的制造

Saturated polyester resins for thermosetting powder coatings

SAE AMS3143A-2003 环氧树脂粉末涂层材料

This specification covers epoxy coating material in powder form. This product is typically used on electrically conductive metal surfaces without

Powder Coating Materials, Epoxy

SAE AMS3731/4C-2016 灌封胶 环氧双酚A型浸渍树脂 热固化 单组分

Form: This specification covers a single component epoxy resin formulation requiring an oven cure for attainment of maximum properties Application

Potting Compound@ Epoxy Bisphenol A-Type Impregnating Resin@ Heat Cure@ Single Component

SAE AMS3731/4B-1993 （非现行）灌封料，环氧双酚 A 型浸渍树脂，热固化，单组分

This specification covers a single component epoxy resin formulation requiring an oven cure for attainment of maximum properties

(Noncurrent)Potting Compound, Epoxy Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component

BS EN ISO 8130-8:1995 粉末涂料 热固性树脂粉末的储藏稳定性评价

Coating powders. Assessment of the storage stability of thermosetting powders

BS EN ISO 8130-8:2010 粉末涂料.热固性树脂粉末的储藏稳定性评价

This part of ISO 8130 deals with the estimation of the storage stability of thermosetting coating powders. It specifies the procedures

Coating powders. Assessment of the storage stability of thermosetting powders

NF F19-477:1991 铁路车辆.聚酯树脂热固性粉末涂料

Railway rolling stock. Thermo setting powder paints made of polyester resins.

ISO 14656:1999 钢筋混凝土用环氧树脂涂层钢的环氧树脂粉末和密封材料

This International Standard specifies requirements for epoxy powders for use in preparing fusion-bonded epoxy-coated steel reinforcing bar, wire

Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

FORD ESF-M70J1-A-2011 热固环氧粉末涂料***与福特WSS-M99P1111-A***一起使用

PAINT, POWDERED, THERMOSETTING EPOXY ***TO BE USED WITH FORD WSS-M99P1111-A***