电镀用氯化镍检测

📅 发布时间:2024-05-27 17:49:26 👤 来源:北检院 👁 阅读:

HG/T 2771-1996

本标准规定了电镀用氯化镍的要求、采样、试验方法以及标志、包装、运输、贮存。 本标准适用于电镀用氯化镍。该产品主要用于电镀镍,在快速镀镍中作阳极活化剂

Nickel Chloride for Electroplating

HG/T 2771-2009

本标准规定了电镀用氯化镍的要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于电镀用氯化镍。该产品主要用于电镀镍,在快速镀镍中作阳极活化剂

Nickelous chloride for electroplating use

SAE AMS2404F-2008

Purpose This specification covers the requirements for electroless nickel deposited on various materials. Application This deposit has been used

Plating@ Electroless Nickel

SAE AMS2404H-2017

Purpose This specification covers the requirements for electroless nickel deposited on various materials. Application This deposit has been used

Plating@ Electroless Nickel

SAE AMS2404E-2003

This specification covers the engineering requirements for electroless nickel deposited on various materials. This deposit has been used typically

Plating, Electroless Nickel

SAE AMS2404J-2018

Purpose This specification covers the requirements for electroless nickel deposited on various materials. Application This deposit has been used

Plating@ Electroless Nickel

IPC TM-650 5.1.122-1975 与硫酸解决方案分析

Rigid printed boards and printed board assemblies are generally subject to classifications by intended end item use. The IPC’s classification

Analysis of Nickel Chloride/Sulfate Electroplating Solutions

DIN 50970:1995 层.学材料.要求和检验

The document specifies requirements on nickel chemicals for nickel baths for the electrolytical production of nickel coatings

Electroplated coatings - Nickel chemicals for nickel baths - Requirements and testing

ASTM F4-66(1999 子管带、碳复合钢带的标准规范

Standard Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes

AIR FORCE MIL-STD-868 B-2007 配置低脆

This standard covers the process and materials required for the electro-deposition of nickel on high strength steel substrates. Electro-deposited

NICKEL PLATING, LOW ENBRITTLEMENT, ELECTRO-DESPOSITION

ASTM F4-66(2005 子管条及碳和包钢条

1.1 This specification covers carbonized nickel strip and carbonized nickel-plated and nickel-clad steel strip for use in electron tubes.

Standard Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes

HB/Z 5090.1-2001 溶液分析方法 EDTA容量法测定硫酸(或)的含量

本标准规定了采用EDTA容量法测定化学镀镍溶液中硫酸镍(NiSO4·7H2O)[或氯化镍(NiCl2·6H2O)含量的方法原理、试剂、分析步骤及分析结果的计算。   本标准适用于化学镀镍溶液中硫酸镍(或氯化镍)含量的测定。测量范围:NiSO4·7H2O   15~40g/L

Analysis method for electroless nickel plating solution Determination of nickel sulfate (or nickel chloride) content through EDTA volume method

HB/Z 5088.3-1999 溶液分析方法 位滴定法测定钠含量

本标准规定了采用电位滴定法测定电镀镍溶液中氯化钠含量的方法原理、试剂、仪器、分析步骤及分析结果的计算。   本标准适用于电镀镍溶液中氯化钠含量的测量。测量范围:4~16g/L引用文件 HB/Z 5083-78 电镀溶液分析砈檬约

Analysis method for nickel plating solution Determination of sodium chloride content through potentiometric titration

GB/T 15355-1994 学试剂 六水合()

本标准规定了化学试剂六水合氯化镍的技术要求、试验方法、检验规则和包装及标志。 本标准适用于化学试剂六水合氯化镍的检验

Chemical reagent. Nickel chloride hexahydrate

GB/T 15355-2008 学试剂.六水合()

本标准规定了化学试剂中六水合氯化镍的性状、规格、试验、检验规则和包装及标志。 本标准适用于化学试剂中六水合氯化镍的检验

Chemical reagent.Nickel chloride hexahydrate

HG/T 2771-1996

本标准规定了电镀用氯化镍的要求、采样、试验方法以及标志、包装、运输、贮存。 本标准适用于电镀用氯化镍。该产品主要用于电镀镍,在快速镀镍中作阳极活化剂

Nickel Chloride for Electroplating

HG/T 2771-2009

本标准规定了电镀用氯化镍的要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于电镀用氯化镍。该产品主要用于电镀镍,在快速镀镍中作阳极活化剂

Nickelous chloride for electroplating use

SAE AMS2404F-2008

Purpose This specification covers the requirements for electroless nickel deposited on various materials. Application This deposit has been used

Plating@ Electroless Nickel

SAE AMS2404H-2017

Purpose This specification covers the requirements for electroless nickel deposited on various materials. Application This deposit has been used

Plating@ Electroless Nickel

SAE AMS2404E-2003

This specification covers the engineering requirements for electroless nickel deposited on various materials. This deposit has been used typically

Plating, Electroless Nickel

SAE AMS2404J-2018

Purpose This specification covers the requirements for electroless nickel deposited on various materials. Application This deposit has been used

Plating@ Electroless Nickel

IPC TM-650 5.1.122-1975 与硫酸解决方案分析

Rigid printed boards and printed board assemblies are generally subject to classifications by intended end item use. The IPC’s classification

Analysis of Nickel Chloride/Sulfate Electroplating Solutions

DIN 50970:1995 层.学材料.要求和检验

The document specifies requirements on nickel chemicals for nickel baths for the electrolytical production of nickel coatings

Electroplated coatings - Nickel chemicals for nickel baths - Requirements and testing

ASTM F4-66(1999 子管带、碳复合钢带的标准规范

Standard Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes

AIR FORCE MIL-STD-868 B-2007 配置低脆

This standard covers the process and materials required for the electro-deposition of nickel on high strength steel substrates. Electro-deposited

NICKEL PLATING, LOW ENBRITTLEMENT, ELECTRO-DESPOSITION

ASTM F4-66(2005 子管条及碳和包钢条

1.1 This specification covers carbonized nickel strip and carbonized nickel-plated and nickel-clad steel strip for use in electron tubes.

Standard Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes

HB/Z 5090.1-2001 溶液分析方法 EDTA容量法测定硫酸(或)的含量

本标准规定了采用EDTA容量法测定化学镀镍溶液中硫酸镍(NiSO4·7H2O)[或氯化镍(NiCl2·6H2O)含量的方法原理、试剂、分析步骤及分析结果的计算。   本标准适用于化学镀镍溶液中硫酸镍(或氯化镍)含量的测定。测量范围:NiSO4·7H2O   15~40g/L

Analysis method for electroless nickel plating solution Determination of nickel sulfate (or nickel chloride) content through EDTA volume method

HB/Z 5088.3-1999 溶液分析方法 位滴定法测定钠含量

本标准规定了采用电位滴定法测定电镀镍溶液中氯化钠含量的方法原理、试剂、仪器、分析步骤及分析结果的计算。   本标准适用于电镀镍溶液中氯化钠含量的测量。测量范围:4~16g/L引用文件 HB/Z 5083-78 电镀溶液分析砈檬约

Analysis method for nickel plating solution Determination of sodium chloride content through potentiometric titration

GB/T 15355-1994 学试剂 六水合()

本标准规定了化学试剂六水合氯化镍的技术要求、试验方法、检验规则和包装及标志。 本标准适用于化学试剂六水合氯化镍的检验

Chemical reagent. Nickel chloride hexahydrate

GB/T 15355-2008 学试剂.六水合()

本标准规定了化学试剂中六水合氯化镍的性状、规格、试验、检验规则和包装及标志。 本标准适用于化学试剂中六水合氯化镍的检验

Chemical reagent.Nickel chloride hexahydrate

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具CMA/CNAS权威检测报告,支持电子版与纸质版,快递送达。