液压卸荷阀检测

JB/T 10371-2002 液压卸荷溢流阀

本标准规定了液压卸荷溢流阀的基本参数、技术要求、试验方法、检验规则和标志、包装、运输和贮存等要求。 　　本标准适用于以液压油或性能相当的其他液体为工作介质的螺纹连接、板式连接和叠加式连接的卸荷溢流阀

Hydraulic fluid power-unloading relief valve

JB/T 10371-2013 液压卸荷溢流阀

本标准规定了液压卸荷溢流阀(包括电磁卸荷溢流阀,以下简称卸荷溢流阀)的基本参数、技术要求、试验方法、检验规则和包装等要求。本标准适用于以矿物油型液压油或性能相当的其他液体为工作介质的卸荷溢流阀

Hydraulic fluid power.Unloading relief valve

GB/T 8100-2006 液压传动.减压阀、顺序阀、卸荷阀、节流阀和单向阀.安装面

本标准规定了主油口最大值径为4mm～32mm的液压减压阀、顺序阀、卸荷阀、节流阀和单向阀安装面的尺寸及其相关特性、以保证其使用的互换性。 本标准适用于通用的板式联接液压减压阀、顺序阀、卸荷法、节流阀和单向阀的安装面，这类阀通常用于工业设备

Hydraulic fluid power.Pressure-reducing valves,sequence valves,unloading valves,throttle valves and check valves.Mounting surfaces

KS B ISO 5781:2004 液压传动.减压阀、顺序阀、卸荷阀、节流阀和止回阀.装配面

이 규격은 호환성을 기하기 위해 유압 감압 밸브, 시퀀스 밸브, 무부하 밸브, 교축 밸브

Hydraulic fluid power-Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves-Mounting surfaces

BS ISO 5781:2000 液压传动.减压阀、顺序阀、卸荷阀、节流阀和单向阀.安装面

This International Standard specifies, in order to ensure interchangeability, the dimensions and other characteristics of surfaces on which hydraulic

Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces

BS ISO 5781:2016 液压传动.减压阀、顺序阀、卸荷阀、节流阀和单向阀.安装面

Hydraulic fluid power. Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces

JIS B 8664:2008 液压传动.减压阀、顺序阀、卸荷阀、节流阀和止回阀.安装面

この規格は，互換性を確保するために，油正の減圧弁，シーケンス弁，アンロード弁，絞り弁及びチ工ック弁を取り付ける面の寸法及びその他の特性について規定する

Hydraulic fluid power -- Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces

KS B ISO 5781-2004(2009 液压传动－减压阀、顺序阀、卸荷阀、节流阀和止回阀－安装面

Hydraulic fluid power－Pressure－reducing valves, sequence valves, unloading valves, throttle valves and check valves－Mounting surfaces

KS B ISO 5781:2013 液压传动 减压阀、顺序阀、卸荷阀、节流阀和止回阀 装配面

Hydraulic fluid power－Pressure－reducing valves, sequence valves, unloading valves, throttle valves and check valves－Mounting surfaces

NF E48-423*NF ISO 5781:2016 液压流体动力 减压阀、顺序阀、卸荷阀、节流阀和止回阀 安装面

Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces

GB/T 8100.3-2021 液压阀安装面 第3部分：减压阀、顺序阀、卸荷阀、节流阀和单向阀

本文件规定了液压减压阀、顺序阀、卸荷阀、节流阀和单向阀安装面的尺寸和相关数据,以保证使用的互换性。 本文件适用于目前常用工业设备上的液压减压阀、顺序阀、卸荷阀、节流阀和单向阀的安装面

Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves

GB/T 8100-1987 板式联接液压压力控制阀(不包括溢流阀)、顺序阀、卸荷阀、节流阀和单向阀 安装面

本标准适用于板式联接液压压力控制阀（不包括溢流阀）、顺序阀、卸荷阀、节流阀和单向阀的安装面

Hydraulic fluid power-pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces

ISO 5781:1987 液压传动.压力控制阀(减压阀除外),顺序阀,卸荷阀,节流阀和止回阀.装配面

Hydraulic fluid power; Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves; Mounting surfaces

DS/ISO 5781:1989 液压传动.压力控制阀(减压阀除外),顺序阀,卸荷阀,节流阀和止回阀.装配面

This International Standard specifies the dimensions and other data relating to surfaces on which hydraulic pressure-control valves (excluding

Hydraulic fluid power. Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces

ISO 5781:2000 液压传动 压力控制阀(不包括溢流阀)、顺序阀、卸荷阀、节流阀和单向阀 安装面

This International Standard specifies, in order to ensure interchangeability, the dimensions and other characteristics of surfaces on which hydraulic

Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces

JB/T 10371-2002 液压卸荷溢流阀

本标准规定了液压卸荷溢流阀的基本参数、技术要求、试验方法、检验规则和标志、包装、运输和贮存等要求。 　　本标准适用于以液压油或性能相当的其他液体为工作介质的螺纹连接、板式连接和叠加式连接的卸荷溢流阀

Hydraulic fluid power-unloading relief valve

JB/T 10371-2013 液压卸荷溢流阀

本标准规定了液压卸荷溢流阀(包括电磁卸荷溢流阀,以下简称卸荷溢流阀)的基本参数、技术要求、试验方法、检验规则和包装等要求。本标准适用于以矿物油型液压油或性能相当的其他液体为工作介质的卸荷溢流阀

Hydraulic fluid power.Unloading relief valve

GB/T 8100-2006 液压传动.减压阀、顺序阀、卸荷阀、节流阀和单向阀.安装面

本标准规定了主油口最大值径为4mm～32mm的液压减压阀、顺序阀、卸荷阀、节流阀和单向阀安装面的尺寸及其相关特性、以保证其使用的互换性。 本标准适用于通用的板式联接液压减压阀、顺序阀、卸荷法、节流阀和单向阀的安装面，这类阀通常用于工业设备

Hydraulic fluid power.Pressure-reducing valves,sequence valves,unloading valves,throttle valves and check valves.Mounting surfaces

KS B ISO 5781:2004 液压传动.减压阀、顺序阀、卸荷阀、节流阀和止回阀.装配面

이 규격은 호환성을 기하기 위해 유압 감압 밸브, 시퀀스 밸브, 무부하 밸브, 교축 밸브

Hydraulic fluid power-Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves-Mounting surfaces

BS ISO 5781:2000 液压传动.减压阀、顺序阀、卸荷阀、节流阀和单向阀.安装面

This International Standard specifies, in order to ensure interchangeability, the dimensions and other characteristics of surfaces on which hydraulic

Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces

BS ISO 5781:2016 液压传动.减压阀、顺序阀、卸荷阀、节流阀和单向阀.安装面

Hydraulic fluid power. Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces

JIS B 8664:2008 液压传动.减压阀、顺序阀、卸荷阀、节流阀和止回阀.安装面

この規格は，互換性を確保するために，油正の減圧弁，シーケンス弁，アンロード弁，絞り弁及びチ工ック弁を取り付ける面の寸法及びその他の特性について規定する

Hydraulic fluid power -- Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces

KS B ISO 5781-2004(2009 液压传动－减压阀、顺序阀、卸荷阀、节流阀和止回阀－安装面

Hydraulic fluid power－Pressure－reducing valves, sequence valves, unloading valves, throttle valves and check valves－Mounting surfaces

KS B ISO 5781:2013 液压传动 减压阀、顺序阀、卸荷阀、节流阀和止回阀 装配面

Hydraulic fluid power－Pressure－reducing valves, sequence valves, unloading valves, throttle valves and check valves－Mounting surfaces

NF E48-423*NF ISO 5781:2016 液压流体动力 减压阀、顺序阀、卸荷阀、节流阀和止回阀 安装面

Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces

GB/T 8100.3-2021 液压阀安装面 第3部分：减压阀、顺序阀、卸荷阀、节流阀和单向阀

本文件规定了液压减压阀、顺序阀、卸荷阀、节流阀和单向阀安装面的尺寸和相关数据,以保证使用的互换性。 本文件适用于目前常用工业设备上的液压减压阀、顺序阀、卸荷阀、节流阀和单向阀的安装面

Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves

GB/T 8100-1987 板式联接液压压力控制阀(不包括溢流阀)、顺序阀、卸荷阀、节流阀和单向阀 安装面

本标准适用于板式联接液压压力控制阀（不包括溢流阀）、顺序阀、卸荷阀、节流阀和单向阀的安装面

Hydraulic fluid power-pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces

ISO 5781:1987 液压传动.压力控制阀(减压阀除外),顺序阀,卸荷阀,节流阀和止回阀.装配面

Hydraulic fluid power; Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves; Mounting surfaces

DS/ISO 5781:1989 液压传动.压力控制阀(减压阀除外),顺序阀,卸荷阀,节流阀和止回阀.装配面

This International Standard specifies the dimensions and other data relating to surfaces on which hydraulic pressure-control valves (excluding

Hydraulic fluid power. Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces

ISO 5781:2000 液压传动 压力控制阀(不包括溢流阀)、顺序阀、卸荷阀、节流阀和单向阀 安装面

This International Standard specifies, in order to ensure interchangeability, the dimensions and other characteristics of surfaces on which hydraulic

Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces