
发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22
点击量:0
本标准规定了自动转换开关电器的术语和定义、分类和特性、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于交流50 Hz或60 Hz,额定电压不超过440 V,用于两路电源之间的转换,在转换过程中中断对负载供电的自动转换开关电器
Automatic transfer switching equipment
Applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated
Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment - Transfer switching equipment
ATSE适用于交流50Hz、额定电压为单相230V、三相或三相四线400V、额定电流至1600A的双电源供电系统中,可用于人值守配电室,能实现两路电源的自动切换:当一路电源出现故障时,可自动切换至另一路电源,在电源转换期间中断向负载供电
PC Class Automatic Switch (ATSE)
Lever and button operated control switches (rech.).
本部分适用于额定电压交流不超过1000V1)或直流不超过1500V的自动转换开关电器(AT-SE)。ATSE适用于紧急供电系统,在转换电源期间中断向负载供电。本部分适用于有外壳或外壳的ATSE。 ATSE所必需的控制电器(如控制开关、……)和保护电器(如断路器、……)应
Low-voltage switchgear and controlgear-Part 6-1: Multiple function equipment-Automatic transfer switching equipment
本标准规定了磁敏温控开关的术语和定义、分类、型号与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于额定电压不超过AC250 V、DC36 V,额定电流不超过16A,动作温度范围在-80℃~280℃的磁敏温控开关(以下简称开关
Automatic electrical controls.Magnetic temperature controls
Changeover selector for electronic speed switch
Railway low-voltage bus tie automatic transfer switch electrical appliances
本标准规定了自动转换开关电器(ATSE)的术语和定义、符号、进行可靠性验证试验的一般要求。本标准适用于交流50 Hz (60 Hz)、额定电压不超过1 000 V、额定电流400 A及以下的ATSE。除验证试验方案及试验程序外,本标准也适用于产品的可靠性测定试验。本标准可作为ATSE生产企业进行产品
Reliability test method for ATSE
本标准规定了位移压力行程开关类产品的术语和定义、产品分类及命名、技术要求、试验方法、检验规则、标志、说明书、包装、运输和贮存。 本标准适用于安装在家用和类似用途电气器具和其他设备内,由于其压力变化引起外部位移变化的压力行程开关,其额定电压不高于250 V,额定电流不大于16
Automatic electrical controls.Pressure travel switch
Applies to automatic transfer switching equipment to be used in emergency power systems with interruption of the supply to the load during transfer
Low-voltage switchgear and controlgear - Multiple Function equipment - Automatic transfer switching equipment
GB14048 的本部分适用于额定电压交流不超过1000 V,直流不超过1500 V的转换开关电器(TSE),TSE用于两个电源之间的转换,在转换过程中中断对负载的供电。 本部分包括: ———手动操作转换开关电器(MTSE); ———远程操作转换开关电器(RTSE); ———自动转换开关电器
Low-voltage switchgear and control gear.Part 6-1:Multiple function equipment.Transfer switching equipment
本部分适用于额定电压交流不超过100OV或直流不超过1500V的转换开关电器(TSE),TSE用于在转换过程中中断对负载供电的电源系统。 它包括: ——手动操作转换开关电器(MTSE); ——遥控操作转换开关电器(RTSE); ——自动转换开关电器(ATSE)。 它包括带外壳和不带外壳的
Low-voltage switchgear and controlgear.Part 6-1: multiple function equipment.Transfer switching equipment
Electric automatic controller differential electronic expansion valve
Specifies requirements for three position enabling switches. These switches are used as components of enabling devices to provide signals
Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements - Three-position enabling switches
本标准规定了自动转换开关电器的术语和定义、分类和特性、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于交流50 Hz或60 Hz,额定电压不超过440 V,用于两路电源之间的转换,在转换过程中中断对负载供电的自动转换开关电器
Automatic transfer switching equipment
Applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated
Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment - Transfer switching equipment
ATSE适用于交流50Hz、额定电压为单相230V、三相或三相四线400V、额定电流至1600A的双电源供电系统中,可用于人值守配电室,能实现两路电源的自动切换:当一路电源出现故障时,可自动切换至另一路电源,在电源转换期间中断向负载供电
PC Class Automatic Switch (ATSE)
Lever and button operated control switches (rech.).
本部分适用于额定电压交流不超过1000V1)或直流不超过1500V的自动转换开关电器(AT-SE)。ATSE适用于紧急供电系统,在转换电源期间中断向负载供电。本部分适用于有外壳或外壳的ATSE。 ATSE所必需的控制电器(如控制开关、……)和保护电器(如断路器、……)应
Low-voltage switchgear and controlgear-Part 6-1: Multiple function equipment-Automatic transfer switching equipment
本标准规定了磁敏温控开关的术语和定义、分类、型号与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于额定电压不超过AC250 V、DC36 V,额定电流不超过16A,动作温度范围在-80℃~280℃的磁敏温控开关(以下简称开关
Automatic electrical controls.Magnetic temperature controls
Changeover selector for electronic speed switch
Railway low-voltage bus tie automatic transfer switch electrical appliances
本标准规定了自动转换开关电器(ATSE)的术语和定义、符号、进行可靠性验证试验的一般要求。本标准适用于交流50 Hz (60 Hz)、额定电压不超过1 000 V、额定电流400 A及以下的ATSE。除验证试验方案及试验程序外,本标准也适用于产品的可靠性测定试验。本标准可作为ATSE生产企业进行产品
Reliability test method for ATSE
本标准规定了位移压力行程开关类产品的术语和定义、产品分类及命名、技术要求、试验方法、检验规则、标志、说明书、包装、运输和贮存。 本标准适用于安装在家用和类似用途电气器具和其他设备内,由于其压力变化引起外部位移变化的压力行程开关,其额定电压不高于250 V,额定电流不大于16
Automatic electrical controls.Pressure travel switch
Applies to automatic transfer switching equipment to be used in emergency power systems with interruption of the supply to the load during transfer
Low-voltage switchgear and controlgear - Multiple Function equipment - Automatic transfer switching equipment
GB14048 的本部分适用于额定电压交流不超过1000 V,直流不超过1500 V的转换开关电器(TSE),TSE用于两个电源之间的转换,在转换过程中中断对负载的供电。 本部分包括: ———手动操作转换开关电器(MTSE); ———远程操作转换开关电器(RTSE); ———自动转换开关电器
Low-voltage switchgear and control gear.Part 6-1:Multiple function equipment.Transfer switching equipment
本部分适用于额定电压交流不超过100OV或直流不超过1500V的转换开关电器(TSE),TSE用于在转换过程中中断对负载供电的电源系统。 它包括: ——手动操作转换开关电器(MTSE); ——遥控操作转换开关电器(RTSE); ——自动转换开关电器(ATSE)。 它包括带外壳和不带外壳的
Low-voltage switchgear and controlgear.Part 6-1: multiple function equipment.Transfer switching equipment
Electric automatic controller differential electronic expansion valve
Specifies requirements for three position enabling switches. These switches are used as components of enabling devices to provide signals
Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements - Three-position enabling switches








