GB/T 40224-2021 雨水渗透、调蓄、储存用塑料模块
本文件规定了雨水渗透、调蓄、储存用塑料模块的术语和定义、分类和标记、材料、要求、试验方法、检验规则、标志、运输和贮存。 本文件适用于城镇建筑与小区、工业区及市政工程雨水控制与回收利用工程中使用的塑料模块
Plastic boxes used for rainwater infiltration,attenuation and storage
QB/T 5304-2018 雨水蓄水池用塑料模块
Plastic modules for rainwater cisterns
PD CEN/TR 17179:2018 热塑性塑料管道和管道系统 雨水渗透和储存衰减系统 地下安装实践
This Technical Report is applicable to the installation of rainwater infiltration and storage/attenuation systems under gravity. This Technical Report
Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for underground installation
CJ/T 542-2020 模块化雨水储水设施
现批准《模块化雨水储水设施》为城镇建设行业产品标准，编号为CJ/T542-2020，自2020年10月1日起实施。 本标准在住房和城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房和城乡建设部标准定额研究所组织中国标准出版社出版发行
Modular rainwater storage facilities
PN-EN 17152-1-2019-11 P 非饮用水地下压输送和储存用塑料管道系统渗透、衰减和储存系统用箱体第1部分：PP和PVC-U雨水箱规范
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water--Boxes used for infiltration, attenuation and storage systems--Part 1: Specifications for storm water boxes made of PP and PVC-U
PN-EN 17152-1-2019-11/Ap1-2020-10 E 非饮用水地下压输送和储存用塑料管道系统渗透、衰减和储存系统用箱体第1部分：PP和PVC-U雨水箱规范
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water--Boxes used for infiltration, attenuation and storage systems--Part 1: Specifications for storm water boxes made of PP and PVC-U
PREN 17152-1-2017 非饮用水非压力地下输送和储存用塑料管道系统 用于渗透 衰减和储存系统的箱 第1部分：PP 和 PVC 雨水箱规范
This document gives the definitions and specifies the minimum requirements for injection moulded@ extruded and thermoformed thermoplastics cuboid
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration@ attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC
NF P16-376-1*NF EN 17152-1:2019 非饮用水地下非压力输送和储存用塑料管道系统 渗透、衰减和储存系统用箱体 第1部分：PP 和 PVC-U 雨水箱规范
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1 : specifications for storm water boxes made of PP and PVC-U
UNE-CEN/TR 17179:2018 热塑性管道和管道系统 雨水渗透和存储衰减系统 地下安装实践
Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for underground installation (Endorsed by Asociación Española de Normalización in April of 2018.)
CJJ/T 311-2020 模块化雨水储水设施技术标准
现批准《模块化雨水储水设施技术标准》为行业标准，编号为CJJ/T311-2020，自2020年10月1日起实施。 本标准在住房和城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房和城乡建设部标准定额研究所组织中国建筑出版传媒有限公司出版发行
Technical standard for modular rainwater storage facilities
UNI EN 17152-1-2020 非饮用水非压力地下输送和储存用塑料管道系统 用于渗透、衰减和储存系统的箱体 第1部分：PP 和 PVC-U 雨水箱规范
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U
BS EN 17152-1:2019 用于非饮用水非压力地下输送和储存的塑料管道系统 用于渗透、衰减和存储系统的箱 PP 和 PVC-U 制成的雨水箱规范
1 Scope This document gives the definitions and specifies the minimum requirements for injection moulded, extruded and thermoformed
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Boxes used for infiltration, attenuation and storage systems - Specifications for storm water boxes made of PP and PVC-U
DIN EN 17152-1:2019 非饮用水非压力地下输送和储存用塑料管道系统 用于渗透、衰减和储存系统的箱体 第1部分：PP 和 PVC-U 雨水箱规范
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U
SN EN 17152-1/AC-2020 非饮用水非压力地下输送和储存用塑料管道系统 用于渗透、衰减和储存系统的箱 第1部分：PP 和 PVC-U 雨水箱规范；更正 AC
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U; Corrigendum AC
17/30360679 DC BS EN 17152-1 用于非饮用水非压力地下输送和储存的塑料管道系统 用于渗透、衰减和储存系统的盒子 第1部分 PP 和 PVC 雨水箱规范
BS EN 17152-1. Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Boxes used for infiltration, attenuation and storage systems. Part 1. Specifications for storm water boxes made of PP and PVC
GB/T 40224-2021 雨水渗透、调蓄、储存用塑料模块
本文件规定了雨水渗透、调蓄、储存用塑料模块的术语和定义、分类和标记、材料、要求、试验方法、检验规则、标志、运输和贮存。 本文件适用于城镇建筑与小区、工业区及市政工程雨水控制与回收利用工程中使用的塑料模块
Plastic boxes used for rainwater infiltration,attenuation and storage
QB/T 5304-2018 雨水蓄水池用塑料模块
Plastic modules for rainwater cisterns
PD CEN/TR 17179:2018 热塑性塑料管道和管道系统 雨水渗透和储存衰减系统 地下安装实践
This Technical Report is applicable to the installation of rainwater infiltration and storage/attenuation systems under gravity. This Technical Report
Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for underground installation
CJ/T 542-2020 模块化雨水储水设施
现批准《模块化雨水储水设施》为城镇建设行业产品标准，编号为CJ/T542-2020，自2020年10月1日起实施。 本标准在住房和城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房和城乡建设部标准定额研究所组织中国标准出版社出版发行
Modular rainwater storage facilities
PN-EN 17152-1-2019-11 P 非饮用水地下压输送和储存用塑料管道系统渗透、衰减和储存系统用箱体第1部分：PP和PVC-U雨水箱规范
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water--Boxes used for infiltration, attenuation and storage systems--Part 1: Specifications for storm water boxes made of PP and PVC-U
PN-EN 17152-1-2019-11/Ap1-2020-10 E 非饮用水地下压输送和储存用塑料管道系统渗透、衰减和储存系统用箱体第1部分：PP和PVC-U雨水箱规范
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water--Boxes used for infiltration, attenuation and storage systems--Part 1: Specifications for storm water boxes made of PP and PVC-U
PREN 17152-1-2017 非饮用水非压力地下输送和储存用塑料管道系统 用于渗透 衰减和储存系统的箱 第1部分：PP 和 PVC 雨水箱规范
This document gives the definitions and specifies the minimum requirements for injection moulded@ extruded and thermoformed thermoplastics cuboid
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration@ attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC
NF P16-376-1*NF EN 17152-1:2019 非饮用水地下非压力输送和储存用塑料管道系统 渗透、衰减和储存系统用箱体 第1部分：PP 和 PVC-U 雨水箱规范
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1 : specifications for storm water boxes made of PP and PVC-U
UNE-CEN/TR 17179:2018 热塑性管道和管道系统 雨水渗透和存储衰减系统 地下安装实践
Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for underground installation (Endorsed by Asociación Española de Normalización in April of 2018.)
CJJ/T 311-2020 模块化雨水储水设施技术标准
现批准《模块化雨水储水设施技术标准》为行业标准，编号为CJJ/T311-2020，自2020年10月1日起实施。 本标准在住房和城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房和城乡建设部标准定额研究所组织中国建筑出版传媒有限公司出版发行
Technical standard for modular rainwater storage facilities
UNI EN 17152-1-2020 非饮用水非压力地下输送和储存用塑料管道系统 用于渗透、衰减和储存系统的箱体 第1部分：PP 和 PVC-U 雨水箱规范
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U
BS EN 17152-1:2019 用于非饮用水非压力地下输送和储存的塑料管道系统 用于渗透、衰减和存储系统的箱 PP 和 PVC-U 制成的雨水箱规范
1 Scope This document gives the definitions and specifies the minimum requirements for injection moulded, extruded and thermoformed
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Boxes used for infiltration, attenuation and storage systems - Specifications for storm water boxes made of PP and PVC-U
DIN EN 17152-1:2019 非饮用水非压力地下输送和储存用塑料管道系统 用于渗透、衰减和储存系统的箱体 第1部分：PP 和 PVC-U 雨水箱规范
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U
SN EN 17152-1/AC-2020 非饮用水非压力地下输送和储存用塑料管道系统 用于渗透、衰减和储存系统的箱 第1部分：PP 和 PVC-U 雨水箱规范；更正 AC
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U; Corrigendum AC
UNE-EN 17152-1:2020 用于非饮用水非压力地下输送和储存的塑料管道系统 用于渗透、衰减和储存系统的箱 第1部分：PP 和 PVC-U 制成的雨水箱规范
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U
编辑：北检院编辑部
