电视和声音信号的电缆分配系统 电源设备检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

GB/T 11318.9-1996 与部件 第9部;通用规范

本标准规定了5MHz~1 750MHz电视和声音信号的电缆分配系统中电源设备(以下简称设备)的产品分类、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于5MHz~1 750MHz电视和声音信号的电缆分配系统中的电源设备

Equipments and components used in cabled distribution systems primarily intended for television and television signals. Part 9: Generic specifications of equipments for power supply

GB/T 6510-1996

本准规定了电缆分配系统运行特性的基本测量方法,以评定这些系统的性能、性能限额值及安全要求。 注:本标准所述的测量方法是基本的。但是任何确保同样精度的等效方法都可采用。 本标准主要适用于电视和声音信号的电缆分配系统

Cabled distribution systems primarily intended for television and sound signals

BS EN 50083-5:2002 .输入

1 General Standards of EN 50083 series deal with cable networks for television signals, sound signals and interactive services including

Cabled distribution systems for television and sound signals - Headend equipment

SJ/T 10657-1995 前端测量方法

本标准规定了电视和声音信号的电缆分配系统前端设备的主要正向电视信号的电性能参数的测量方法。 本标准适用于电缆分配系统前端设备正向电视信号的电性能参数的测量

Cabled distribution systems for television and signals Methods of measurement on head end equipments

BS EN 50083-2:2001 .磁兼容性

1 General Standards of EN 50083 series deal with cable networks for television signals, sound signals and interactive services including

Cabled distribution systems for television and sound signals - Part 2: Electromagnetic compatibility for equipment

BS EN 50083-2:2007 磁兼容性

Cable networks for television signals, sound signals and interactive services. Electromagnetic compatibility for equipment

SANS 60728-2:2005 磁兼容性

Applies to the radiation characteristics and immunity to electromagnetic disturbances of active and passive equipment for the reception, processing

Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility for equipment

SJ 2708-1986 .图形符

1.1 本标准规定的图形符号适用于"声音和电视信号的电缆分配系统"的电气图。 1.2 本标准所示图形符号的方位可按图面布置需要旋转或成镜象放置,但文字和指示方向不得倒置。 1.3 本标准所示图形符号的大小可按需要缩小或放大,但符号各组成部分之间的比例应保持不变。 1.4

Cable distribution system for sound and television signals--Graphical symbols

EN 50083-3:1994 第3部:有同轴宽带

Cabled Distribution Systems for Television and Sound Signals Part 3: Active Coaxial Wideband Distribution Equipment

EN 50083-4:1994 第4部同轴宽带

Cabled Distribution Systems for Television and Sound Signals Part 4: Passive Coaxial Wideband Distribution Equipment

EN 50083-5:1994 第5部:前端

Cabled Distribution Systems for Television and Sound Signals Part 5: Headend Equipment

EN 50083-6:1994 第6部:光学

Cabled Distribution Systems for Television and Sound Signals Part 6: Optical Equipment

IEC 60728-4:2000 第4部:同轴宽带

This part of IEC 60728 lays down the measuring methods, performance requirements and data publication requirements for passive coaxial wideband

Cabled distribution systems for television and sound signals - Part 4: Passive coaxial wideband distribution equipment

IEC 60728-3:2000 第3部:有同轴宽带

Cabled distribution systems for television and sound signals - Part 3: Active coaxial wideband distribution equipment

GB 13836-2000 第2部;磁兼容

本标准规定了电视和声音信号电缆分配系统设备的电磁兼容性能要求和测量方法,具体规定了允许的骚扰电压及辐射的最大值、抗扰度及屏蔽效果的最小值,并叙述了测量方法。 本标准适用于接收、处理和分配电视和声音信号的有源和源设备(如有源同轴宽带分配设备、源同轴宽带分配设备、前端设备、光纤

Cabled distribution systems for television and sound signals. Part 2: Electromagnetic compatibility of equipment

GB/T 11318.9-1996 与部件 第9部;通用规范

本标准规定了5MHz~1 750MHz电视和声音信号的电缆分配系统中电源设备(以下简称设备)的产品分类、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于5MHz~1 750MHz电视和声音信号的电缆分配系统中的电源设备

Equipments and components used in cabled distribution systems primarily intended for television and television signals. Part 9: Generic specifications of equipments for power supply

GB/T 6510-1996

本准规定了电缆分配系统运行特性的基本测量方法,以评定这些系统的性能、性能限额值及安全要求。 注:本标准所述的测量方法是基本的。但是任何确保同样精度的等效方法都可采用。 本标准主要适用于电视和声音信号的电缆分配系统

Cabled distribution systems primarily intended for television and sound signals

BS EN 50083-5:2002 .输入

1 General Standards of EN 50083 series deal with cable networks for television signals, sound signals and interactive services including

Cabled distribution systems for television and sound signals - Headend equipment

SJ/T 10657-1995 前端测量方法

本标准规定了电视和声音信号的电缆分配系统前端设备的主要正向电视信号的电性能参数的测量方法。 本标准适用于电缆分配系统前端设备正向电视信号的电性能参数的测量

Cabled distribution systems for television and signals Methods of measurement on head end equipments

BS EN 50083-2:2001 .磁兼容性

1 General Standards of EN 50083 series deal with cable networks for television signals, sound signals and interactive services including

Cabled distribution systems for television and sound signals - Part 2: Electromagnetic compatibility for equipment

BS EN 50083-2:2007 磁兼容性

Cable networks for television signals, sound signals and interactive services. Electromagnetic compatibility for equipment

SANS 60728-2:2005 磁兼容性

Applies to the radiation characteristics and immunity to electromagnetic disturbances of active and passive equipment for the reception, processing

Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility for equipment

SJ 2708-1986 .图形符

1.1 本标准规定的图形符号适用于"声音和电视信号的电缆分配系统"的电气图。 1.2 本标准所示图形符号的方位可按图面布置需要旋转或成镜象放置,但文字和指示方向不得倒置。 1.3 本标准所示图形符号的大小可按需要缩小或放大,但符号各组成部分之间的比例应保持不变。 1.4

Cable distribution system for sound and television signals--Graphical symbols

EN 50083-3:1994 第3部:有同轴宽带

Cabled Distribution Systems for Television and Sound Signals Part 3: Active Coaxial Wideband Distribution Equipment

EN 50083-4:1994 第4部同轴宽带

Cabled Distribution Systems for Television and Sound Signals Part 4: Passive Coaxial Wideband Distribution Equipment

EN 50083-5:1994 第5部:前端

Cabled Distribution Systems for Television and Sound Signals Part 5: Headend Equipment

EN 50083-6:1994 第6部:光学

Cabled Distribution Systems for Television and Sound Signals Part 6: Optical Equipment

IEC 60728-4:2000 第4部:同轴宽带

This part of IEC 60728 lays down the measuring methods, performance requirements and data publication requirements for passive coaxial wideband

Cabled distribution systems for television and sound signals - Part 4: Passive coaxial wideband distribution equipment

IEC 60728-3:2000 第3部:有同轴宽带

Cabled distribution systems for television and sound signals - Part 3: Active coaxial wideband distribution equipment

GB 13836-2000 第2部;磁兼容

本标准规定了电视和声音信号电缆分配系统设备的电磁兼容性能要求和测量方法,具体规定了允许的骚扰电压及辐射的最大值、抗扰度及屏蔽效果的最小值,并叙述了测量方法。 本标准适用于接收、处理和分配电视和声音信号的有源和源设备(如有源同轴宽带分配设备、源同轴宽带分配设备、前端设备、光纤

Cabled distribution systems for television and sound signals. Part 2: Electromagnetic compatibility of equipment

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。