对氧磷检测

GB/T 32281-2015 太阳能级硅片和硅料中氧、碳、硼和磷量的测定 二次离子质谱法

ASTM E1917-2002 用双氧钒磷钼酸盐分子吸收光谱测定法测定镍、镍铁和镍合金中磷含量的标准试验方法

This test method is used for the analysis of nickel, ferronickel, and nickel base alloy samples by molecular absorption spectrometry to check compliance with compositional specifications. It is assumed that all who use the procedure will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that the work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices must be followed, such as those described in Guide E 882.1.1 This test method covers the determination of phosphorus in nickel, ferronickel, and nickel alloys in the 0.0007 % through 0.05 % range.1.2 Arsenic, chromium, hafnium, niobium, silicon, tantalum, titanium, and tungsten interfere, but the interference can be avoided by complexation or volatilization (for Cr). The lowest phosphorus content (0.0007 %) can be reached only in samples with low contents of interfering elements.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards associated with the use of this practice see Practices E 50. Refer to specific warning notes given throughout this test method.

Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by the Phosphovanadomolybdate Molecular Absorption Spectrometric Method

KS D ISO 11400-2001 镍、镍铁和镍合金.磷含量测定.二氧磷钒钼分子吸收光谱法

이 규격은 인 함량이 0.000 5∼0.05 %(m/m)의 범위에 있는 니켈, 페로니켈 및

Nickel, ferronickel and nickel alloys－Determination of phosphorus Content－Phosphovanadomolybdate molecular absorption spectrometric method

KS D ISO 11400-2001 镍、镍铁和镍合金.磷含量测定.二氧磷钒钼分子吸收光谱法

이 규격은 인 함량이 0.000 5∼0.05 %(m/m)의 범위에 있는 니켈, 페로니켈 및

Nickel, ferronickel and nickel alloys－Determination of phosphorus Content－Phosphovanadomolybdate molecular absorption spectrometric method

ASTM E1917-1997 用双氧钒磷钼酸盐分子吸收光谱测定法测定镍、镍铁和镍合金中磷含量的标准试验方法

1.1 This test method covers the determination of phosphorus in nickel, ferronickel, and nickel alloys in the 0.0007% through 0.05% range.

Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Molecular Absorption Spectrometric Method

ISO 11400-1992 镍、镍铁和镍合金 磷含量的测定 二氧磷钒钼分子吸收光谱法

Phosphorus content can be determined in the range of 0,000 5 % (m/m) to 0,05 % (m/m). As, Cr, Hf, Nb, Si, Ta, Ti, W interfere, but the interferences can be avoided. The principle is dissolution of a test portion in a mixture of nitric and hydrochloric acids, fuming with perchloric acid, removal of chromium, complexation of silicon, conversion of phosphorus to phosphovanadomolybdic acid, extraction of this compound.

Nickel, ferronickel and nickel alloys; determination of phosphorus content; phosphovanadomolybdate molecular absorption spectrometric method

JUS C.D1.010-1990 铜及铜合金．磷除氧铜．化学成分和使用说明

Copper and copper alloys. Phospborus-deoxidxzed copper. Chemical composition and applicaticm directions

ANSI K62.207-1977 三氯丙氧磷(trifenofos)－(杀线虫剂和杀螨剂)通用名称

Provides the accepted common name for the chemical compound given. Includes the use of the common name and the physical and chemical properties of the chemical compound.

Common Name for the Pest Control Chemical O-Ethyl S-propyl O-(2,4,6-Trichlorophenyl) phosphorothioate "Trifenofos"

CNS 1863-1973 化学试药（氧氯化磷）

Phosphorus Oxychloride

HGB 3250-1960 氯化氧磷