GB/T 22872-2008 强韧纸板.分层定量的测定
本标准规定了纸板分层后各层定量的测定方法。 本标准适用于强韧纸板
Solid fibreboard.Determination of grammage of single layers
ISO 5638:1978 强韧纸板 每层定量的测定
Applies to single layers of glued and laminated solid fibreboard and is applicable to all types of solid fibreboard as defined in ISO 4046, provided
Solid fibreboard; Determination of grammage of single layers
GB/T 34444-2017 纸和纸板 层间剥离强度的测定
Paper and board—Determination of the layer peel strength
PN P50147-1972 纸和纸板板抗层分离的测定
Przedmiotem normy jest metoda statycznego oznaczania rozwarstwiania wytworów i przetworów papierniczych z zastosowaniem óy-namometru
De?ermino?ion o? resistance of papers and boards to ply separation
KS M ISO 5629:2007 纸和纸板.弯曲韧性的测定.共振法
이 규격은 공명법을 이용하여 휨 강성을 측정하기 위한 방법을 규정한다. 일반적으로 휨 강성
Paper and board-Determination of bending stiffness-Resonance method
ISO 5629:1983 纸和纸板 弯曲韧性的测定 共振法
Applies to a wide range of papers and boards, but for some materials, such as multi-ply papers and boards, papers and boards with appreciable curl
Paper and board; Determination of bending stiffness; Resonance method
KS M ISO 5629:2017 纸和纸板 弯曲韧性的测定 共振法
Paper and board－Determination of bending stiffness－Resonance method
ISO 5629:2017 纸和纸板 弯曲韧性的测定 共振法
This document specifies a method for the determination of bending stiffness using the resonance method. This method gives only a single result
Paper and board - Determination of bending stiffness - Resonance method
NEN 1858-1988 纸和纸板．夹板强度的测定
Deze norm beschrijft een methode voor de bepaling van de splijtweerstand van papier en karton. Opmerking De norm is niet van toepassing op
Paper and board - Determination of plybond strength
GB/T 451.2-2002 纸和纸板定量的测定
本标准规定了纸和纸板定量的测定方法。本标准适用于各种纸和纸板
Paper and board-Determination of grammage
PD ISO/TS 17958:2013 纸和纸板 断裂韧性的测定 恒定伸长率法(1.7mm/s)
Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s)
GB/T 12914-2008 纸和纸板 抗张强度的测定
本标准规定了纸和纸板抗张强度的测定方法：恒速加荷法和恒速拉伸法。 本标准适用于除瓦楞纸板外的所有纸和纸板
Paper and board.Determination of tensile properties
GB/T 2679.8-2016 纸和纸板 环压强度的测定
GB/T 2679的本部分规定了使用压缩试验仪测定纸和纸板环压强度的方法。 本部分适用于厚度范围在0.10 mm~0.58 mm的纸和纸板环压强度的测试。对于厚度低于0.28 mm的试样，测试结果为失稳破坏和纯压缩的合力
Paper and board.Determination of compressive strength (Ring crush method)
GB/T 2679.8-1995 纸和纸板环压强度的测定
本标准规定了使用压缩试验仪测定纸和纸板环压强度的方法。 本标准适用于厚度0.28～0.51mm制造纸箱和纸盒的纸和纸板，也可用于厚度低到0.15mm高到1.00mm的纸和纸板，但表示试样的边压强度可靠性较差
Paper and board--Determination of compressive strength-- Ring crush method
ISO/TS 23885:2022 纸、纸板和印刷技术.内折页涂层强度的测定
Paper, board and graphic technology — Determination of the coating strength in the inner fold
GB/T 22872-2008 强韧纸板.分层定量的测定
本标准规定了纸板分层后各层定量的测定方法。 本标准适用于强韧纸板
Solid fibreboard.Determination of grammage of single layers
ISO 5638:1978 强韧纸板 每层定量的测定
Applies to single layers of glued and laminated solid fibreboard and is applicable to all types of solid fibreboard as defined in ISO 4046, provided
Solid fibreboard; Determination of grammage of single layers
GB/T 34444-2017 纸和纸板 层间剥离强度的测定
Paper and board—Determination of the layer peel strength
PN P50147-1972 纸和纸板板抗层分离的测定
Przedmiotem normy jest metoda statycznego oznaczania rozwarstwiania wytworów i przetworów papierniczych z zastosowaniem óy-namometru
De?ermino?ion o? resistance of papers and boards to ply separation
KS M ISO 5629:2007 纸和纸板.弯曲韧性的测定.共振法
이 규격은 공명법을 이용하여 휨 강성을 측정하기 위한 방법을 규정한다. 일반적으로 휨 강성
Paper and board-Determination of bending stiffness-Resonance method
ISO 5629:1983 纸和纸板 弯曲韧性的测定 共振法
Applies to a wide range of papers and boards, but for some materials, such as multi-ply papers and boards, papers and boards with appreciable curl
Paper and board; Determination of bending stiffness; Resonance method
KS M ISO 5629:2017 纸和纸板 弯曲韧性的测定 共振法
Paper and board－Determination of bending stiffness－Resonance method
ISO 5629:2017 纸和纸板 弯曲韧性的测定 共振法
This document specifies a method for the determination of bending stiffness using the resonance method. This method gives only a single result
Paper and board - Determination of bending stiffness - Resonance method
NEN 1858-1988 纸和纸板．夹板强度的测定
Deze norm beschrijft een methode voor de bepaling van de splijtweerstand van papier en karton. Opmerking De norm is niet van toepassing op
Paper and board - Determination of plybond strength
GB/T 451.2-2002 纸和纸板定量的测定
本标准规定了纸和纸板定量的测定方法。本标准适用于各种纸和纸板
Paper and board-Determination of grammage
PD ISO/TS 17958:2013 纸和纸板 断裂韧性的测定 恒定伸长率法(1.7mm/s)
Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s)
GB/T 12914-2008 纸和纸板 抗张强度的测定
本标准规定了纸和纸板抗张强度的测定方法：恒速加荷法和恒速拉伸法。 本标准适用于除瓦楞纸板外的所有纸和纸板
Paper and board.Determination of tensile properties
GB/T 2679.8-2016 纸和纸板 环压强度的测定
GB/T 2679的本部分规定了使用压缩试验仪测定纸和纸板环压强度的方法。 本部分适用于厚度范围在0.10 mm~0.58 mm的纸和纸板环压强度的测试。对于厚度低于0.28 mm的试样，测试结果为失稳破坏和纯压缩的合力
Paper and board.Determination of compressive strength (Ring crush method)
GB/T 2679.8-1995 纸和纸板环压强度的测定
本标准规定了使用压缩试验仪测定纸和纸板环压强度的方法。 本标准适用于厚度0.28～0.51mm制造纸箱和纸盒的纸和纸板，也可用于厚度低到0.15mm高到1.00mm的纸和纸板，但表示试样的边压强度可靠性较差
Paper and board--Determination of compressive strength-- Ring crush method
ISO/TS 23885:2022 纸、纸板和印刷技术.内折页涂层强度的测定
Paper, board and graphic technology — Determination of the coating strength in the inner fold
编辑：北检院编辑部
