精细陶瓷界面检测

GB/T 39826-2021 精细陶瓷 界面弯曲强度测定 四点弯曲法

本标准规定了一种常温下采用四点弯曲法确定陶瓷界面弯曲强度测定方法的术语和定义、原理、仪器设备、样品、试验、计算和试验报告。本标准适用于陶瓷与陶瓷、陶瓷与金属对接界面弯曲强度的测定。其他材料的结合界面也可参照使用

Fine ceramics—Determining flexural bond strength—Four-point bending method

GB/T 31541-2015 精细陶瓷界面拉伸和剪切粘结强度试验方法 十字交叉法

本标准规定了在室温下采用十字交叉法测量陶瓷-陶瓷、陶瓷-金属、陶瓷-玻璃的界面拉伸和剪切粘结强度的试验方法，规定了试样制备方法，试验模式及速率（加载速率及变形速率），数据收集和报告程序。 本标准适用于均质块体陶瓷和各种晶须、纤维、颗粒增强型陶瓷复合材料，也可用于粘结剂强度测试。 本标准适用于材料

Test method for interfacial bond strength of fine ceramic materials.Cross-bonded

ISO 13124:2011 精细陶瓷(高级陶瓷,高级工业陶瓷).陶瓷材料界面粘结试验方法

This International Standard specifies a test method for determining the interfacial tensile and shear bond strength of ceramic-ceramic, ceramic-metal

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for interfacial bond strength of ceramic materials

BS ISO 13124:2011 精细陶瓷(高级陶瓷,高级工业陶瓷).陶瓷材料界面粘合强度试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial bond strength of ceramic materials

ISO 17095:2013 精细陶瓷(高级陶瓷,高级工艺陶瓷).高温条件下陶瓷材料界面粘结强度试验方法

This International Standard specifies the method of test for determining the interfacial tensile and shear bond strength of ceramic-ceramic

Fine ceramics (advanced ceramics, advanced technical ceramics).Test method for interfacial bond strength of ceramic materials at elevated temperatures

BS ISO 17095:2013 精细陶瓷(高级陶瓷,高级工艺陶瓷).高温条件下陶瓷材料界面粘结强度试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial bond strength of ceramic materials at elevated temperatures

NF B43-215*NF ISO 17095:2013 精细陶瓷(高级陶瓷, 高级工业陶瓷). 高温环境下陶瓷材料界面粘结强度的试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for interfacial bond strength of ceramic materials at elevated temperatures

UNE-EN ISO 19630:2021 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature (ISO 19630:2017) (Endorsed by Asociación Española de Normalización in Septe...

UNE-EN ISO 20323:2021 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties of tubes (ISO 20323:2018) (Endorsed by Asociación Esp...

UNE-EN ISO 20504:2022 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of compressive properties (ISO 20504:2022) (Endorsed by Asociación Española de Normalización in January ...

UNE-EN ISO 17142:2016 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude (ISO 17142:2014) (Endorsed by AE...

UNE-EN ISO 18610:2021 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique (ISO 18610:2016) (Endorsed by ...

DIN EN ISO 18610:2021-04 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique (ISO 18610:2016); German versi...

UNE-EN ISO 22459:2022 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO 2...

UNE-EN ISO 19629:2022 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018) (Endorsed by Asociación Española de Normalización...

GB/T 39826-2021 精细陶瓷 界面弯曲强度测定 四点弯曲法

本标准规定了一种常温下采用四点弯曲法确定陶瓷界面弯曲强度测定方法的术语和定义、原理、仪器设备、样品、试验、计算和试验报告。本标准适用于陶瓷与陶瓷、陶瓷与金属对接界面弯曲强度的测定。其他材料的结合界面也可参照使用

Fine ceramics—Determining flexural bond strength—Four-point bending method

GB/T 31541-2015 精细陶瓷界面拉伸和剪切粘结强度试验方法 十字交叉法

本标准规定了在室温下采用十字交叉法测量陶瓷-陶瓷、陶瓷-金属、陶瓷-玻璃的界面拉伸和剪切粘结强度的试验方法，规定了试样制备方法，试验模式及速率（加载速率及变形速率），数据收集和报告程序。 本标准适用于均质块体陶瓷和各种晶须、纤维、颗粒增强型陶瓷复合材料，也可用于粘结剂强度测试。 本标准适用于材料

Test method for interfacial bond strength of fine ceramic materials.Cross-bonded

ISO 13124:2011 精细陶瓷(高级陶瓷,高级工业陶瓷).陶瓷材料界面粘结试验方法

This International Standard specifies a test method for determining the interfacial tensile and shear bond strength of ceramic-ceramic, ceramic-metal

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for interfacial bond strength of ceramic materials

BS ISO 13124:2011 精细陶瓷(高级陶瓷,高级工业陶瓷).陶瓷材料界面粘合强度试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial bond strength of ceramic materials

ISO 17095:2013 精细陶瓷(高级陶瓷,高级工艺陶瓷).高温条件下陶瓷材料界面粘结强度试验方法

This International Standard specifies the method of test for determining the interfacial tensile and shear bond strength of ceramic-ceramic

Fine ceramics (advanced ceramics, advanced technical ceramics).Test method for interfacial bond strength of ceramic materials at elevated temperatures

BS ISO 17095:2013 精细陶瓷(高级陶瓷,高级工艺陶瓷).高温条件下陶瓷材料界面粘结强度试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial bond strength of ceramic materials at elevated temperatures

NF B43-215*NF ISO 17095:2013 精细陶瓷(高级陶瓷, 高级工业陶瓷). 高温环境下陶瓷材料界面粘结强度的试验方法

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for interfacial bond strength of ceramic materials at elevated temperatures

DIN EN ISO 18610:2021-04 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique (ISO 18610:2016); German versi...

UNE-EN ISO 22459:2022 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO 2...

DIN EN ISO 20323:2021-11 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties of tubes (ISO 20323:2018); German version EN ISO 20323...

UNE-EN ISO 20323:2021 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties of tubes (ISO 20323:2018) (Endorsed by Asociación Esp...

UNE-EN ISO 20504:2022 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of compressive properties (ISO 20504:2022) (Endorsed by Asociación Española de Normalización in January ...

UNE-EN ISO 19629:2022 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018) (Endorsed by Asociación Española de Normalización...

UNE-EN ISO 19630:2021 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature (ISO 19630:2017) (Endorsed by Asociación Española de Normalización in Septe...

UNE-EN ISO 24370:2023 精细陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method (ISO 24370:2005) (Endorsed by Asociación Española de Normalización in...