
发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22
点击量:0
This Standard is an adoption with national modifications of the first edition of IEC 60335-2-109, Household and similar electrical appliances ? Safety
1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of UV radiation water
Household and similar electrical appliances. Safety - Particular requirements for UV radiation water treatment appliances
Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
Appareils électrodomestiques et analogues - Sécurité - Partie 2-109 : règles particulières pour les appareils de traitement de l'eau par rayonnements ultraviolets
Appareils électrodomestiques et analogues - Sécurité - Partie 2-109 : règles particulières pour les appareils de traitement de l'eau par rayonnements ultraviolets
Appareils électrodomestiques et analogues - Sécurité - Partie 2-109 : règles particulières pour les appareils de traitement de l'eau par rayonnements ultraviolets
Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
To update the test methods in section 7
Ultraviolet microbiological water treatment systems
The purpose of this proposal is to update the pass/fail criteria levels in Tables 1 and 2 for cyclohexanone, methyl ethyl ketone, carbon disulfide
Ultraviolet microbiological water treatment systems
Inclusion of language in section 8 for Class B systems stating that the systems was tested under laboratory conditions and actual use may vary
Ultraviolet microbiological water treatment systems
To enable point-of-entry (POE) drinking water treatment systems to be covered by NSF/ANSI 61 and to use this universal materials safety standard
Ultraviolet microbiological water treatment systems
To include USEPA methods 524.2 and 525.2 in Tables 1 and 2 and include language to ensure when using the GC/MS (method 625) an adequate analytical
Ultraviolet microbiological water treatment systems
The proposed revision is to lower the maximum contaminant concentration (MCC) for lead for material extraction testing from 0.015 mg/L to 0.010 mg/L
Ultraviolet microbiological water treatment systems
To clarify the formulation review requirements and provide consistency between the Drinking Water treatment Unit Standards and NSF/ANSI 60 and NSF
Ultraviolet microbiological water treatment systems
Ultraviolet microbiological water treatment systems
This Standard is an adoption with national modifications of the first edition of IEC 60335-2-109, Household and similar electrical appliances ? Safety
1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of UV radiation water
Household and similar electrical appliances. Safety - Particular requirements for UV radiation water treatment appliances
Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
Appareils électrodomestiques et analogues - Sécurité - Partie 2-109 : règles particulières pour les appareils de traitement de l'eau par rayonnements ultraviolets
Appareils électrodomestiques et analogues - Sécurité - Partie 2-109 : règles particulières pour les appareils de traitement de l'eau par rayonnements ultraviolets
Appareils électrodomestiques et analogues - Sécurité - Partie 2-109 : règles particulières pour les appareils de traitement de l'eau par rayonnements ultraviolets
Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
To update the test methods in section 7
Ultraviolet microbiological water treatment systems
The purpose of this proposal is to update the pass/fail criteria levels in Tables 1 and 2 for cyclohexanone, methyl ethyl ketone, carbon disulfide
Ultraviolet microbiological water treatment systems
Inclusion of language in section 8 for Class B systems stating that the systems was tested under laboratory conditions and actual use may vary
Ultraviolet microbiological water treatment systems
To enable point-of-entry (POE) drinking water treatment systems to be covered by NSF/ANSI 61 and to use this universal materials safety standard
Ultraviolet microbiological water treatment systems
To include USEPA methods 524.2 and 525.2 in Tables 1 and 2 and include language to ensure when using the GC/MS (method 625) an adequate analytical
Ultraviolet microbiological water treatment systems
The proposed revision is to lower the maximum contaminant concentration (MCC) for lead for material extraction testing from 0.015 mg/L to 0.010 mg/L
Ultraviolet microbiological water treatment systems
To clarify the formulation review requirements and provide consistency between the Drinking Water treatment Unit Standards and NSF/ANSI 60 and NSF
Ultraviolet microbiological water treatment systems
Ultraviolet microbiological water treatment systems








