JB/T 2603-1994 电动单梁悬挂起重机
本标准规定了电动单梁悬挂起重机的型式、基本参数、技术要求、试验方法和检验规则等内容。 本标准适用于工作级别A3~A5，工作环境温度-25~+40℃一般用途的电动单梁悬挂起重机。专用的电动单梁悬挂起重机中相同或类似的部分亦可参照使用。 本标准不适用于下列条件下工作的起重机
Electric single girder suspension crane
JB/T 3775-1994 手动梁式悬挂起重机
本标准规定了手动梁式悬挂起重机的型式和基本参数、技术要求、试验方法、检验规则等内容。 本标准适用于额定起重量为0.5～3.2t；工作级别不超过A1；工作环境温度不低于－25度；由人力在地面用手拉链条驱动的起重机
Manual beam suspension crane
GOST R 50059-1992 行走式单梁悬挂起重机 规格
Travelling single-girder suspended cranes. Specifications
JB/T 2603-2008 电动悬挂起重机
本标准规定了电动悬挂起重机（以下简称悬挂起重机）的型式与基本参数、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等内容。 本标准适用于以电动葫芦为起升机构的一般用途的起重机，其他形式或特殊用途起重机亦可参照使用。 本标准不适用于在下列环境条件下工作的起重机： ——有爆炸性气体、可燃性
Electric under slung crane
STAS 11861-1980 手动悬挂单梁的移动式起重机．分类体系
1 Prezentul standard stabile?te tipurile ?i caracteristicile tehnice principale pentru podurile rulante ac?ionate manual monogrind?, suspendate, cu c
HAND DRIVE SUSPENSION SIN- GLE BEAM TRAVELLING CRANES Typification
ASME B30.17-1998 高架和龙门起重机(支承桥、单梁悬挂式起重机)
This standard applies to overhead and gantry cranes with a top running bridge, of single-girder construction, utilizing one or more underhung hoists
Overhead And Gantry Cranes (Top Running Bridge,Single Girder, Underhung Hoist) (B30.17 - 1998)
ASME B30.11-1993 单轨悬挂起重机
Monorails and underhung cranes
ASME B30.17-2020 起重机和单轨（带悬挂式小车或桥梁）
Volume B30.17 includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of hand-operated
Cranes and Monorails (With Underhung Trolley or Bridge)
ASME B30.17a Addenda-1999 高架和龙门起重机(支承桥、单梁悬挂式起重机).附录
Overhead and gantry cranes (top running bridge, single girder, underhung hoist); Addenda
ASME B30.17c Addenda-1996 龙门起重机(高架移动桥,单梁,悬挂升降器).附录
Overhead and gantry cranes (top running bridge, single girder, underhung hoist); Addenda
ASME B30.11-1998 单轨悬挂式起重机
Monorails and underhung cranes
ASME B30.11-2004 单轨悬挂式起重机
Within the general scope defined in Section I of the introduction, ASME B30.11 applies to underhung cranes and monorail systems where load-carrying
Monorails and Underhung Cranes
ASME B30.11-2010 单轨悬挂式起重机
The document includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of underhung crane
Monorails and Underhung Cranes (Includes Interpretations Dated May 2004 thru August 2009)
JB/T 1306-1994 电动单梁起重机
本标准规定了电动单梁起重机的型式和基本参数、技术要求、试验方法、检验规则等内容。 本标准适用于工作级别A3～A5，工作环境温度-25℃～+40℃一般用途的电动单梁起重机。专用的电动单梁起重机中相同或类似的部分亦可参照使用。 本标准不适用于下列条件下工作的起重机
Electric single girder crane
ASME B30.17 INT-1987 说明:高架起重机和龙门起重机(单梁顶行桥架,悬挂提升机)
B30.17 includes provisions that apply to the construction, installation, operation, inspection, and maintenance of hand-operated and power-driven
Interpreations: Overhead and gantry cranes (top running bridge, single grinder, underhung hoist)
JB/T 2603-1994 电动单梁悬挂起重机
本标准规定了电动单梁悬挂起重机的型式、基本参数、技术要求、试验方法和检验规则等内容。 本标准适用于工作级别A3~A5，工作环境温度-25~+40℃一般用途的电动单梁悬挂起重机。专用的电动单梁悬挂起重机中相同或类似的部分亦可参照使用。 本标准不适用于下列条件下工作的起重机
Electric single girder suspension crane
JB/T 3775-1994 手动梁式悬挂起重机
本标准规定了手动梁式悬挂起重机的型式和基本参数、技术要求、试验方法、检验规则等内容。 本标准适用于额定起重量为0.5～3.2t；工作级别不超过A1；工作环境温度不低于－25度；由人力在地面用手拉链条驱动的起重机
Manual beam suspension crane
GOST R 50059-1992 行走式单梁悬挂起重机 规格
Travelling single-girder suspended cranes. Specifications
JB/T 2603-2008 电动悬挂起重机
本标准规定了电动悬挂起重机（以下简称悬挂起重机）的型式与基本参数、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等内容。 本标准适用于以电动葫芦为起升机构的一般用途的起重机，其他形式或特殊用途起重机亦可参照使用。 本标准不适用于在下列环境条件下工作的起重机： ——有爆炸性气体、可燃性
Electric under slung crane
STAS 11861-1980 手动悬挂单梁的移动式起重机．分类体系
1 Prezentul standard stabile?te tipurile ?i caracteristicile tehnice principale pentru podurile rulante ac?ionate manual monogrind?, suspendate, cu c
HAND DRIVE SUSPENSION SIN- GLE BEAM TRAVELLING CRANES Typification
ASME B30.17-1998 高架和龙门起重机(支承桥、单梁悬挂式起重机)
This standard applies to overhead and gantry cranes with a top running bridge, of single-girder construction, utilizing one or more underhung hoists
Overhead And Gantry Cranes (Top Running Bridge,Single Girder, Underhung Hoist) (B30.17 - 1998)
ASME B30.11-1993 单轨悬挂起重机
Monorails and underhung cranes
ASME B30.17-2020 起重机和单轨（带悬挂式小车或桥梁）
Volume B30.17 includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of hand-operated
Cranes and Monorails (With Underhung Trolley or Bridge)
ASME B30.17a Addenda-1999 高架和龙门起重机(支承桥、单梁悬挂式起重机).附录
Overhead and gantry cranes (top running bridge, single girder, underhung hoist); Addenda
ASME B30.17c Addenda-1996 龙门起重机(高架移动桥,单梁,悬挂升降器).附录
Overhead and gantry cranes (top running bridge, single girder, underhung hoist); Addenda
ASME B30.11-1998 单轨悬挂式起重机
Monorails and underhung cranes
ASME B30.11-2004 单轨悬挂式起重机
Within the general scope defined in Section I of the introduction, ASME B30.11 applies to underhung cranes and monorail systems where load-carrying
Monorails and Underhung Cranes
ASME B30.11-2010 单轨悬挂式起重机
The document includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of underhung crane
Monorails and Underhung Cranes (Includes Interpretations Dated May 2004 thru August 2009)
JB/T 1306-1994 电动单梁起重机
本标准规定了电动单梁起重机的型式和基本参数、技术要求、试验方法、检验规则等内容。 本标准适用于工作级别A3～A5，工作环境温度-25℃～+40℃一般用途的电动单梁起重机。专用的电动单梁起重机中相同或类似的部分亦可参照使用。 本标准不适用于下列条件下工作的起重机
Electric single girder crane
ASME B30.17 INT-1987 说明:高架起重机和龙门起重机(单梁顶行桥架,悬挂提升机)
B30.17 includes provisions that apply to the construction, installation, operation, inspection, and maintenance of hand-operated and power-driven
Interpreations: Overhead and gantry cranes (top running bridge, single grinder, underhung hoist)
编辑：北检院编辑部
