铝制品挤压和轧板的高效有机喷粉检测

BS 6496:1984 施加并焙固于铝合金的挤压材、板材和预成型材(外部建筑用)的粉末有机涂层和带有粉末有机涂层的铝合金挤压材、板材和预成型材的精饰规范

Requirements for coatings before and after their application. Also specifies the pretreatment of the aluminium alloy. (See also BS 4842 and BS 6497

Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated wi

ISO/R 827:1968 铝及铝合金挤压制品的机械性能限值

Mechanical property limits for extruded products of aluminium and aluminium alloys

PN H92745-1991 铝和铝合金，飞机制造业的冷轧卷板

Przedmiotem normy s? blachy z aluminium i stopów aluminium walcowane na zimno, przeznaczone dla przemys?u lotniczego

Aluminium and aluminium alloys. Cold rolled sheets for aircraft industry

GB/T 34506-2017 喷射成形锭坯挤制的铝合金挤压型材、棒材和管材

Aluminum alloys extruded profiles，bars，rods，and tubes from spray-formed billet

SAE AMS2204B-1964 公差铝轧制或挤压标准结构形状

PURPOSE: To publish established manufacturing tolerances

TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

SAE AMS2204C-1966 公差铝轧制或挤压标准结构形状

TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

SAE AMS2204A-1960 公差铝轧制或挤压标准结构形状

TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

SAE AMS2204-1960 公差铝轧制或挤压标准结构形状

TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

SNI 07-0603-1989 建筑用挤压铝制品

Produk hasil aluminium ekstrusi untuk keperluan arsitektur

NP 38-1961 厨房中用到的材料．轧制高铝板．中等系列产品

A presente norma tem por fim definir as características a que devem obedecer as panelas altas de alumínio laminado da série ?média

GB/T 32184-2015 高电导率铝合金挤压扁棒及板

本标准规定了高电导率铝合金挤压扁棒及板的要求、试验方法、检验规则和标志、包装、.运输.贮存及质量证明书与订货单(或合同)内容。 2

High conductivity aluminum alloy extruded flat rod and plate

YS/T 429.2-2012 铝幕墙板.第2部分：有机聚合物喷涂铝单板

本部分规定了幕墙用有机聚合物喷涂铝单板的要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书与订货单（或合同）内容。 本部分适用于以氟碳漆（聚偏二氟乙烯）或粉末（热固性有机聚合物）作表面涂层的幕墙用铝及铝合金单层成形板(以下简称铝单板

Aluminum curtain wall panel.Part 2:Aluminum panel with organic polymer coating

AAMA 2603-2002 铝挤压件和面板上有色有机涂层的自愿规范、性能要求和测试程序

Voluntary Specification, Performance Requirements and Test Procedures For Pigmented Organic Coatings on Aluminum Extrusions and Panels

AAMA 2603-2013 铝挤压件和面板上有色有机涂层的自愿规范、性能要求和测试程序

1.1This specification describes test procedures and performance requirements for pigmented organic coatings applied to aluminum extrusions and panels.

Voluntary Specification, Performance Requirements and Test Procedures For Pigmented Organic Coatings on Aluminum Extrusions and Panels

ISO/TR 2136:1977 锻铝和铝合金.轧制产品.机械性能

Wrought aluminium and aluminium alloys — Rolled products — Mechanical properties

BS 6496:1984 施加并焙固于铝合金的挤压材、板材和预成型材(外部建筑用)的粉末有机涂层和带有粉末有机涂层的铝合金挤压材、板材和预成型材的精饰规范

Requirements for coatings before and after their application. Also specifies the pretreatment of the aluminium alloy. (See also BS 4842 and BS 6497

Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated wi

ISO/R 827:1968 铝及铝合金挤压制品的机械性能限值

Mechanical property limits for extruded products of aluminium and aluminium alloys

PN H92745-1991 铝和铝合金，飞机制造业的冷轧卷板

Przedmiotem normy s? blachy z aluminium i stopów aluminium walcowane na zimno, przeznaczone dla przemys?u lotniczego

Aluminium and aluminium alloys. Cold rolled sheets for aircraft industry

GB/T 34506-2017 喷射成形锭坯挤制的铝合金挤压型材、棒材和管材

Aluminum alloys extruded profiles，bars，rods，and tubes from spray-formed billet

SAE AMS2204B-1964 公差铝轧制或挤压标准结构形状

PURPOSE: To publish established manufacturing tolerances

TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

SAE AMS2204C-1966 公差铝轧制或挤压标准结构形状

TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

SAE AMS2204A-1960 公差铝轧制或挤压标准结构形状

TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

SAE AMS2204-1960 公差铝轧制或挤压标准结构形状

TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

SNI 07-0603-1989 建筑用挤压铝制品

Produk hasil aluminium ekstrusi untuk keperluan arsitektur

NP 38-1961 厨房中用到的材料．轧制高铝板．中等系列产品

A presente norma tem por fim definir as características a que devem obedecer as panelas altas de alumínio laminado da série ?média

GB/T 32184-2015 高电导率铝合金挤压扁棒及板

本标准规定了高电导率铝合金挤压扁棒及板的要求、试验方法、检验规则和标志、包装、.运输.贮存及质量证明书与订货单(或合同)内容。 2

High conductivity aluminum alloy extruded flat rod and plate

YS/T 429.2-2012 铝幕墙板.第2部分：有机聚合物喷涂铝单板

本部分规定了幕墙用有机聚合物喷涂铝单板的要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书与订货单（或合同）内容。 本部分适用于以氟碳漆（聚偏二氟乙烯）或粉末（热固性有机聚合物）作表面涂层的幕墙用铝及铝合金单层成形板(以下简称铝单板

Aluminum curtain wall panel.Part 2:Aluminum panel with organic polymer coating

AAMA 2603-2002 铝挤压件和面板上有色有机涂层的自愿规范、性能要求和测试程序

Voluntary Specification, Performance Requirements and Test Procedures For Pigmented Organic Coatings on Aluminum Extrusions and Panels

AAMA 2603-2013 铝挤压件和面板上有色有机涂层的自愿规范、性能要求和测试程序

1.1This specification describes test procedures and performance requirements for pigmented organic coatings applied to aluminum extrusions and panels.

Voluntary Specification, Performance Requirements and Test Procedures For Pigmented Organic Coatings on Aluminum Extrusions and Panels

ISO/TR 2136:1977 锻铝和铝合金.轧制产品.机械性能

Wrought aluminium and aluminium alloys — Rolled products — Mechanical properties