医用清洗剂检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

T/WSJD 002-2019 卫生要求

本标准规定了医用清洗剂原料要求、基本要求、技术要求、检验方法、运输、贮存和包装、标识要求及注意事项。 本标准适用于医用清洗剂的生产与应用

Hygienic requirements for medical cleaning agents

ASTM D817-96(2004)e1 临床疗器械特性的标准指南

Ash content gives an estimate of the inorganic content of cellulose ester samples. The presence of high levels of inorganic content (ash) can

Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate

ASTM D8179-18 临床疗器械特性的标准指南

1.1 Detergents play a critical role in the cleaning of clinically-used medical devices, but there are few consensus methods for describing the key

Standard Guide for Characterizing Detergents for the Cleaning of Clinically-used Medical Devices

T/ZGXX 0003-2019 疗器械

5 要求 5.1 材料要求 配方中所用的表面活性剂应为已确认能够降解,且在目前科技水平的认知程度上其本身及降解产物对动植物和环境害的化学品。具体要求如下: a)表面活性剂的初级生物降解度不低于 90%。 b)表面活性剂初级生物降解度低于 90%,但不

Medical device cleaning agent

SANS 1281:2004 碟机

Covers a liquid rinse aid for use in dishwashing machines to produce faster drying and eliminate water spotting and filming. General requirements

Rinse aid for use in dishwashing machines

JIS T 7329:2008 消毒器

This Japanese Industrial Standard specifies the basic requirement for a washer sterilizer that washes and sterilizes a used medical device (matters

Washer sterilizers for medical use

FCR VA 11 71 01-2011 消毒设备

MEDICAL WASHING AND STERILIZING EQUIPMENT

CNS 2552-1966 (金属酸

Detergent for metal pickling

HG/T 5532~5533-2019 工业烷烃和水垢酸性(2019)

Industrial Alkane Cleaners and Limescale Acid Cleaners (2019)

FORD FLTM AI 104-01-2013 测试

PURGE TEST FOR PURGING SOLVENT

SANS 1341:2003 高压(高温和蒸气法)

Covers two types of detergent for high-pressure cleaning of painted and unpainted cement and metal surfaces (ferrous and non-ferrous

Detergent for high-pressure cleaning (hot and steam cleaning)

ASTM F1021-18 商碗机和玻璃喂食器、和消毒的标准规范

1.1 This specification covers detergent feeders, rinse additive feeders, and sanitizing agent feeders intended to automatically maintain

Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines

QB/T 2967-2008 饮料

本标准规定了饮料用瓶清洗剂的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于由表面活性剂和助剂等配方生产的含磷和磷的饮料用瓶清洗剂

Detergent for bottles washing

QB/T 2967-2023 饮料

本文件规定了饮料用瓶清洗剂的术语和定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。本文件适用于由表面活性剂和助剂等配方生产的含磷或磷的饮料用瓶清洗剂

beverage bottle cleaner

PN C77056-05-1987 采样质量控制,测试结果的评估

Instytut Chemii Przemys?owej

Agents for laundering and washing Li?uid agents for wasching Sampling, ?uality control,evaluation of test results

T/WSJD 002-2019 卫生要求

本标准规定了医用清洗剂原料要求、基本要求、技术要求、检验方法、运输、贮存和包装、标识要求及注意事项。 本标准适用于医用清洗剂的生产与应用

Hygienic requirements for medical cleaning agents

ASTM D817-96(2004)e1 临床疗器械特性的标准指南

Ash content gives an estimate of the inorganic content of cellulose ester samples. The presence of high levels of inorganic content (ash) can

Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate

ASTM D8179-18 临床疗器械特性的标准指南

1.1 Detergents play a critical role in the cleaning of clinically-used medical devices, but there are few consensus methods for describing the key

Standard Guide for Characterizing Detergents for the Cleaning of Clinically-used Medical Devices

T/ZGXX 0003-2019 疗器械

5 要求 5.1 材料要求 配方中所用的表面活性剂应为已确认能够降解,且在目前科技水平的认知程度上其本身及降解产物对动植物和环境害的化学品。具体要求如下: a)表面活性剂的初级生物降解度不低于 90%。 b)表面活性剂初级生物降解度低于 90%,但不

Medical device cleaning agent

SANS 1281:2004 碟机

Covers a liquid rinse aid for use in dishwashing machines to produce faster drying and eliminate water spotting and filming. General requirements

Rinse aid for use in dishwashing machines

JIS T 7329:2008 消毒器

This Japanese Industrial Standard specifies the basic requirement for a washer sterilizer that washes and sterilizes a used medical device (matters

Washer sterilizers for medical use

FCR VA 11 71 01-2011 消毒设备

MEDICAL WASHING AND STERILIZING EQUIPMENT

CNS 2552-1966 (金属酸

Detergent for metal pickling

HG/T 5532~5533-2019 工业烷烃和水垢酸性(2019)

Industrial Alkane Cleaners and Limescale Acid Cleaners (2019)

FORD FLTM AI 104-01-2013 测试

PURGE TEST FOR PURGING SOLVENT

SANS 1341:2003 高压(高温和蒸气法)

Covers two types of detergent for high-pressure cleaning of painted and unpainted cement and metal surfaces (ferrous and non-ferrous

Detergent for high-pressure cleaning (hot and steam cleaning)

ASTM F1021-18 商碗机和玻璃喂食器、和消毒的标准规范

1.1 This specification covers detergent feeders, rinse additive feeders, and sanitizing agent feeders intended to automatically maintain

Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines

QB/T 2967-2008 饮料

本标准规定了饮料用瓶清洗剂的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于由表面活性剂和助剂等配方生产的含磷和磷的饮料用瓶清洗剂

Detergent for bottles washing

QB/T 2967-2023 饮料

本文件规定了饮料用瓶清洗剂的术语和定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。本文件适用于由表面活性剂和助剂等配方生产的含磷或磷的饮料用瓶清洗剂

beverage bottle cleaner

PN C77056-05-1987 采样质量控制,测试结果的评估

Instytut Chemii Przemys?owej

Agents for laundering and washing Li?uid agents for wasching Sampling, ?uality control,evaluation of test results

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。