DL/T 313-2010 1000kV电力互感器现场检验规范
本标准规定了1000kV电力互感器现场检验的试验条件、采用的试验设备及仪器仪表、检验方法和检验结果判定。 本标准适用于1000kV电力互感器准确度（误差）的现场检验
Technical specification for field inspection of 1000kV power transformers
DB53/T 604-2014 电磁式互感器综合特性现场检验方法
本标准规定了电力工程用电磁式互感器综合特性的现场试验方法，以及对试验结果的分析计算和判断方法。 本标准适用于额定频率为50Hz的新生产、使用中和修理后的500kV及以下电力工程用电磁式互感器的现场试验，及电力建设工程中的互感器交接试验和电力生产过程中的预防性试验。 本标准不适用于实验室用互感器、电子
On-the-spot inspection method of comprehensive characteristics of electromagnetic transformer
DL/T 1788-2017 高压直流互感器现场校验规范
Specification for on-site calibration of HVDC transformers
IEEE C57.13.1-2006 继电式电流互感器现场试验导则
The scope of this guide is to describe field test methods that assure current transformers (CTs) are connected properly@ are of marked ratio
Guide for Field Testing of Relaying Current Transformers
IEEE C57.13.1-1981 继电式电流互感器现场试验导则
Foreword?(This Foreword is not a part of ANSI/IEEE C57.13.1-1981@ IEEE Guide for Field Testing of Relaying Current Transformers.) This guide
Guide for Field Testing of Relaying Current Transformers
DB51/T 1763-2014 互感器标准装置现场检测方法
On-site detection method of transformer standard device
DL/T 1544-2016 电子式互感器现场交接验收规范
本标准规定了电子式互感器在现场交接验收中的交接验收试验、资料验收、设备验收以及现场交接验收评价等内容。 本标准适用于交流1000kV及似下电压等级的变电站及发电厂中新安装、改装的电子式互感器。 本标准提到的电子式互感器包括传感器(电气测量与采集)和合并单元两部分
The specification for site acceptance of electronic instrument transformers
DL/T 2185-2020 工频电压互感器现场校验成套装置技术条件
Technical conditions for power frequency voltage transformer on-site calibration complete set of equipment
ANSI/IEEE Std C57.13.1-1981 继电电流互感器现场测试 IEEE 指南
A description is given of field-test methods that will ensure that the current transformers used as a source of relay input current are connected
IEEE Guide for Field Testing of Relaying Current Transformers
IEEE Std C57.13.1-2017 继电电流互感器现场测试 IEEE 指南
This guide describes field test methods that assure that current transformers are connected properly, are of marked ratio and polarity
IEEE Guide for Field Testing of Relaying Current Transformers
IEEE Std C57.13.1-2006 继电电流互感器现场测试 IEEE 指南 Redline
This guide describes field test methods that assure that current transformers are connected properly, are of marked ratio and polarity
IEEE Guide for Field Testing of Relaying Current Transformers - Redline
IEEE PC57.13.1/D6.5, March 2017 IEEE 继电电流互感器现场测试指南草案
This guide describes field test methods that assure that current transformers are connected properly, are of marked ratio and polarity
IEEE Draft Guide for Field Testing of Relaying Current Transformers
IEEE Std C57.13.1-2006 - Redline IEEE 继电电流互感器现场测试指南 红线
This guide describes field test methods that assure that current transformers are connected properly, are of marked ratio and polarity
IEEE Guide for Field Testing of Relaying Current Transformers - Redline
DL/T 2186-2020 工频电流互感器现场校验成套装置技术条件
Technical conditions for power frequency current transformer on-site calibration complete set of equipment
DL/T 2264-2021 智能变压器现场检验规范
Intelligent transformer site inspection specification
DL/T 313-2010 1000kV电力互感器现场检验规范
本标准规定了1000kV电力互感器现场检验的试验条件、采用的试验设备及仪器仪表、检验方法和检验结果判定。 本标准适用于1000kV电力互感器准确度（误差）的现场检验
Technical specification for field inspection of 1000kV power transformers
DB53/T 604-2014 电磁式互感器综合特性现场检验方法
本标准规定了电力工程用电磁式互感器综合特性的现场试验方法，以及对试验结果的分析计算和判断方法。 本标准适用于额定频率为50Hz的新生产、使用中和修理后的500kV及以下电力工程用电磁式互感器的现场试验，及电力建设工程中的互感器交接试验和电力生产过程中的预防性试验。 本标准不适用于实验室用互感器、电子
On-the-spot inspection method of comprehensive characteristics of electromagnetic transformer
DL/T 1788-2017 高压直流互感器现场校验规范
Specification for on-site calibration of HVDC transformers
IEEE C57.13.1-2006 继电式电流互感器现场试验导则
The scope of this guide is to describe field test methods that assure current transformers (CTs) are connected properly@ are of marked ratio
Guide for Field Testing of Relaying Current Transformers
IEEE C57.13.1-1981 继电式电流互感器现场试验导则
Foreword?(This Foreword is not a part of ANSI/IEEE C57.13.1-1981@ IEEE Guide for Field Testing of Relaying Current Transformers.) This guide
Guide for Field Testing of Relaying Current Transformers
DB51/T 1763-2014 互感器标准装置现场检测方法
On-site detection method of transformer standard device
DL/T 1544-2016 电子式互感器现场交接验收规范
本标准规定了电子式互感器在现场交接验收中的交接验收试验、资料验收、设备验收以及现场交接验收评价等内容。 本标准适用于交流1000kV及似下电压等级的变电站及发电厂中新安装、改装的电子式互感器。 本标准提到的电子式互感器包括传感器(电气测量与采集)和合并单元两部分
The specification for site acceptance of electronic instrument transformers
DL/T 2185-2020 工频电压互感器现场校验成套装置技术条件
Technical conditions for power frequency voltage transformer on-site calibration complete set of equipment
ANSI/IEEE Std C57.13.1-1981 继电电流互感器现场测试 IEEE 指南
A description is given of field-test methods that will ensure that the current transformers used as a source of relay input current are connected
IEEE Guide for Field Testing of Relaying Current Transformers
IEEE Std C57.13.1-2017 继电电流互感器现场测试 IEEE 指南
This guide describes field test methods that assure that current transformers are connected properly, are of marked ratio and polarity
IEEE Guide for Field Testing of Relaying Current Transformers
IEEE Std C57.13.1-2006 继电电流互感器现场测试 IEEE 指南 Redline
This guide describes field test methods that assure that current transformers are connected properly, are of marked ratio and polarity
IEEE Guide for Field Testing of Relaying Current Transformers - Redline
DL/T 2186-2020 工频电流互感器现场校验成套装置技术条件
Technical conditions for power frequency current transformer on-site calibration complete set of equipment
IEEE PC57.13.1/D6.5, March 2017 IEEE 继电电流互感器现场测试指南草案
This guide describes field test methods that assure that current transformers are connected properly, are of marked ratio and polarity
IEEE Draft Guide for Field Testing of Relaying Current Transformers
IEEE Std C57.13.1-2006 - Redline IEEE 继电电流互感器现场测试指南 红线
This guide describes field test methods that assure that current transformers are connected properly, are of marked ratio and polarity
IEEE Guide for Field Testing of Relaying Current Transformers - Redline
DL/T 2264-2021 智能变压器现场检验规范
Intelligent transformer site inspection specification
编辑：北检院编辑部
