YS/T 1535-2022 超导用铌钛合金棒材再结晶率的测定方法
本文件适用于超导用铌钛合金棒材再结晶率的测定
Method for determination of recrystallization rate of niobium-titanium alloy rods for superconducting purposes
ASTM B884-11 用于超导的铌钛合金坯料,棒材和条材标准规格
1.1 This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48 % titanium. This material is used
Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
ASTM B884-05 用于超导的铌钛合金坯料、棒材和条材的标准规范
1.1 This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48 % titanium. This material is used in the manufacture
Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
ASTM B884-97 用于超导的铌钛合金坯料、棒材和杆材的标准规范
1.1 This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48% titanium. This material is used in the manufacture
Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications
ASTM B884-01 用于超导的铌钛合金坯料、棒材和杆材的标准规范
1.1 This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48% titanium. This material is used in the manufacture
Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications
ASTM B884-11(2019 用于超导应用的铌 - 钛合金坯料 棒和棒的标准规范
1.1 This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48 % titanium. This material is used in the manufacture of wire
Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
YS/T 861.5-2013 铌钛合金化学分析方法 第5部分：钛量的测定 硫酸铁铵滴定法
YS/T 861的本部分规定了铌钛合金中钛量的测定方法、本部分适用于铌钛合金钛量的测定,测定范围40.00%~60.00
Methods for chemical analysis of niobium-titanium alloy.Part 5:Determination of titanium content.The ammonium ferric sulfate titration
NASM5674-2000 铆钉 结构 铝合金 钛铌合金通用规范
This specification covers aluminum alloy and titanium columbium alloy rivets
Rivets@ Structural@ Aluminum Alloy@ Titanium Columbium Alloy General Specification for
YS/T 861.3-2013 铌钛合金化学分析方法 第3部分：氢量的测定 惰气熔融热导法
YS/T 861的本部分规定了用热导法测定铌钛合金中氢量的方法、本部分适用于铌钛合金中氢量的测定,测定范围:0.000 2%~0.050
Methods for chemical analysis of niobium-titanium alloy.Part 3:Determination of hydrogen content.Inert gas fusion thermal conductivity method
AIA NASM20470-1998 铆钉 实心 万向头 铝合金和钛铌合金 FSC 5320
Rivet, Solid, Universal Head, Aluminum Alloy and Titanium Columbium Alloy FSC 5320
AIA NAS 9313-1997 铆钉 实心 小公差 100° 平头 铝合金 钛铌合金 FSC 5320
Rivet, Solid, Close Tolerance, 100 Degree, Flush Head, Aluminum Alloy, Titanium-Columbium Alloy FSC 5320
NAS1097-2012 铆钉@ 实心@ 100° 平头剪切头@ 铝合金@ 钛铌合金 (Rev 10)
RIVET@ SOLID@ 100° FLUSH SHEAR HEAD@ ALUMINUM ALLOY@ TITANIUM COLUMBIUM ALLOY (Rev 10)
NAS1097-2018 铆钉@ 实心@ 100° 平头剪切头@ 铝合金@ 钛铌合金 (Rev 11)
RIVET@ SOLID@ 100° FLUSH SHEAR HEAD@ ALUMINUM ALLOY@ TITANIUM COLUMBIUM ALLOY (Rev 11)
GJB 9584-2018 钛铌合金丝材规范
Specification for titanium-niobium alloy wire
YS/T 861.4-2013 铌钛合金化学分析方法 第4部分：碳量的测定 高频燃烧红外吸收法
YS/T 861的本部分规定了铌钛合金材料中碳量的测定方法、本部分适用于铌钛合金材料中碳量的测定,测定范围:0.002 0%~0.10
Methods for chemical analysis of niobium-titanium alloy.Part 4:Determination of carbon content.The high-frequency infrared absorption method
YS/T 1535-2022 超导用铌钛合金棒材再结晶率的测定方法
本文件适用于超导用铌钛合金棒材再结晶率的测定
Method for determination of recrystallization rate of niobium-titanium alloy rods for superconducting purposes
ASTM B884-11 用于超导的铌钛合金坯料,棒材和条材标准规格
1.1 This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48 % titanium. This material is used
Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
ASTM B884-05 用于超导的铌钛合金坯料、棒材和条材的标准规范
1.1 This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48 % titanium. This material is used in the manufacture
Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
ASTM B884-97 用于超导的铌钛合金坯料、棒材和杆材的标准规范
1.1 This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48% titanium. This material is used in the manufacture
Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications
ASTM B884-01 用于超导的铌钛合金坯料、棒材和杆材的标准规范
1.1 This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48% titanium. This material is used in the manufacture
Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications
ASTM B884-11(2019 用于超导应用的铌 - 钛合金坯料 棒和棒的标准规范
1.1 This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48 % titanium. This material is used in the manufacture of wire
Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
YS/T 861.5-2013 铌钛合金化学分析方法 第5部分：钛量的测定 硫酸铁铵滴定法
YS/T 861的本部分规定了铌钛合金中钛量的测定方法、本部分适用于铌钛合金钛量的测定,测定范围40.00%~60.00
Methods for chemical analysis of niobium-titanium alloy.Part 5:Determination of titanium content.The ammonium ferric sulfate titration
NASM5674-2000 铆钉 结构 铝合金 钛铌合金通用规范
This specification covers aluminum alloy and titanium columbium alloy rivets
Rivets@ Structural@ Aluminum Alloy@ Titanium Columbium Alloy General Specification for
YS/T 861.3-2013 铌钛合金化学分析方法 第3部分：氢量的测定 惰气熔融热导法
YS/T 861的本部分规定了用热导法测定铌钛合金中氢量的方法、本部分适用于铌钛合金中氢量的测定,测定范围:0.000 2%~0.050
Methods for chemical analysis of niobium-titanium alloy.Part 3:Determination of hydrogen content.Inert gas fusion thermal conductivity method
AIA NASM20470-1998 铆钉 实心 万向头 铝合金和钛铌合金 FSC 5320
Rivet, Solid, Universal Head, Aluminum Alloy and Titanium Columbium Alloy FSC 5320
AIA NAS 9313-1997 铆钉 实心 小公差 100° 平头 铝合金 钛铌合金 FSC 5320
Rivet, Solid, Close Tolerance, 100 Degree, Flush Head, Aluminum Alloy, Titanium-Columbium Alloy FSC 5320
NAS1097-2012 铆钉@ 实心@ 100° 平头剪切头@ 铝合金@ 钛铌合金 (Rev 10)
RIVET@ SOLID@ 100° FLUSH SHEAR HEAD@ ALUMINUM ALLOY@ TITANIUM COLUMBIUM ALLOY (Rev 10)
NAS1097-2018 铆钉@ 实心@ 100° 平头剪切头@ 铝合金@ 钛铌合金 (Rev 11)
RIVET@ SOLID@ 100° FLUSH SHEAR HEAD@ ALUMINUM ALLOY@ TITANIUM COLUMBIUM ALLOY (Rev 11)
GJB 9584-2018 钛铌合金丝材规范
Specification for titanium-niobium alloy wire
YS/T 861.4-2013 铌钛合金化学分析方法 第4部分：碳量的测定 高频燃烧红外吸收法
YS/T 861的本部分规定了铌钛合金材料中碳量的测定方法、本部分适用于铌钛合金材料中碳量的测定,测定范围:0.002 0%~0.10
Methods for chemical analysis of niobium-titanium alloy.Part 4:Determination of carbon content.The high-frequency infrared absorption method
编辑：北检院编辑部
