鞋(靴)材料检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

BS 5131-0:1991 试验方法 第0部分:总则

Methods of test for footwear and footwear materials. General introduction

BS 5131-0:1990 试验方法.第0部分:总则

Lists the methods of test given in the Sections of BS 5131 together with a further list of other methods used to test footwear materials

Methods of test for footwear and footwear materials - General introduction

GB/T 31008-2014 足部防护 ()安全性选择规范

本标准对足部防护鞋〈靴〉材料中可能存在的限量物质进行了分类′对材料安全性提出了要求a 本标准适用于足部防护鞋(靴)用的皮革类材料、合成材料、夭然材料及其他非金眉材料的选择。 本标准不适用于足部防护鞋(靴)巾金届材料的选择

Foot protection.Selection specification for material safety of footwear

BS 5131-5.13:1980 试验方法.第5部分:成品试验.第13节:帮和衬里缝合牢度测量

Method for determining the breaking strength of stitched seams directly taken from shoes or made up to simulate a shoe construction

Methods of test for footwear and footwear materials - Testing of complete footwear - Measurement of the strength of stitched seams in upper and lining materials

BS 5131-5.9:1979 试验方法.第5部分:成品试验.第9节:后跟掌面强度

Measurement of the force required to detach the top piece from the underside of the shoe heel

Methods of test for footwear and footwear materials - Testing of complete footwear - Strength of top piece attachment to shoe heels

BS 5131 Sec.5.3:1990 试验方法.第5部分:成品试验.第3节:成品的耐热性

Methods of test for footwear and footwear materials. Testing of complete footwear. Resistance of complete footwear to heat

KS M ISO TR 20879:2008 .制性能要求.

이 표준은 재료에 상관 없이 최종 사용에 대한 적합성을 평가하기 위해서 신발(완제품 신발은

Footwear-Performance requirements for components for footwear-Uppers

ISO/TR 20883:2007 .制性能要求.

This Technical Report establishes the performance requirements for shanks components for footwear (not for finished footwear), irrespective

Footwear - Performance requirements for components for footwear - Shanks

ISO/TR 20879:2007 .制性能要求.

This Technical Report establishes the performance requirements for uppers components for footwear (not for the finished footwear), irrespective

Footwear - Performance requirements for components for footwear - Uppers

BS EN 15307:2007 皮革和用胶粘剂.上底粘附力.最低强度要求

This European Standard defines for four main types of footwear minimum strength requirements for their soleupper bonds produced with solvent-based

Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements

DIN EN 15307:2007 皮革和用胶粘剂.上底粘附力.最低强度要求

This European Standard defines for four main types of footwear minimum strength requirements for their soleupper bonds produced with solvent-based

Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements; English version of DIN EN 15307:2007-08

BS EN 15307:2014 皮革和用胶粘剂.上底粘附力.最低强度要求

Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements

BS 5131-3.6:1991 试验方法.第3部分:帮、织物和缝线.第6节:带耐磨性

Method of determining abrasion resistance both in the dry state and the wet state. To be read in conjunction with BS 5131-0

Methods of test for footwear and footwear materials - Uppers, textiles and threads - Abrasion resistance of shoe laces

BS 5131-2.7:1980 试验方法.第2部分:底.第7节:物理试验试样制备

Preparation of test sheets and pieces from manufactured soles or soling materials or from mouldable or vulcanizable materials. Time intervals between

Methods of test for footwear and footwear materials - Solings - The preparation of test pieces from soling materials for physical testing

ISO/TR 20572:2007 .制性能要求.附件

This Technical Report establishes the performance requirements for accessories (laces and eyelets, metal components and touch and close fasteners

Footwear - Performance requirements for components for footwear - Accessories

BS 5131-0:1991 试验方法 第0部分:总则

Methods of test for footwear and footwear materials. General introduction

BS 5131-0:1990 试验方法.第0部分:总则

Lists the methods of test given in the Sections of BS 5131 together with a further list of other methods used to test footwear materials

Methods of test for footwear and footwear materials - General introduction

GB/T 31008-2014 足部防护 ()安全性选择规范

本标准对足部防护鞋〈靴〉材料中可能存在的限量物质进行了分类′对材料安全性提出了要求a 本标准适用于足部防护鞋(靴)用的皮革类材料、合成材料、夭然材料及其他非金眉材料的选择。 本标准不适用于足部防护鞋(靴)巾金届材料的选择

Foot protection.Selection specification for material safety of footwear

BS 5131-5.13:1980 试验方法.第5部分:成品试验.第13节:帮和衬里缝合牢度测量

Method for determining the breaking strength of stitched seams directly taken from shoes or made up to simulate a shoe construction

Methods of test for footwear and footwear materials - Testing of complete footwear - Measurement of the strength of stitched seams in upper and lining materials

BS 5131-5.9:1979 试验方法.第5部分:成品试验.第9节:后跟掌面强度

Measurement of the force required to detach the top piece from the underside of the shoe heel

Methods of test for footwear and footwear materials - Testing of complete footwear - Strength of top piece attachment to shoe heels

BS 5131 Sec.5.3:1990 试验方法.第5部分:成品试验.第3节:成品的耐热性

Methods of test for footwear and footwear materials. Testing of complete footwear. Resistance of complete footwear to heat

KS M ISO TR 20879:2008 .制性能要求.

이 표준은 재료에 상관 없이 최종 사용에 대한 적합성을 평가하기 위해서 신발(완제품 신발은

Footwear-Performance requirements for components for footwear-Uppers

ISO/TR 20883:2007 .制性能要求.

This Technical Report establishes the performance requirements for shanks components for footwear (not for finished footwear), irrespective

Footwear - Performance requirements for components for footwear - Shanks

ISO/TR 20879:2007 .制性能要求.

This Technical Report establishes the performance requirements for uppers components for footwear (not for the finished footwear), irrespective

Footwear - Performance requirements for components for footwear - Uppers

BS EN 15307:2007 皮革和用胶粘剂.上底粘附力.最低强度要求

This European Standard defines for four main types of footwear minimum strength requirements for their soleupper bonds produced with solvent-based

Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements

DIN EN 15307:2007 皮革和用胶粘剂.上底粘附力.最低强度要求

This European Standard defines for four main types of footwear minimum strength requirements for their soleupper bonds produced with solvent-based

Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements; English version of DIN EN 15307:2007-08

BS EN 15307:2014 皮革和用胶粘剂.上底粘附力.最低强度要求

Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements

BS 5131-3.6:1991 试验方法.第3部分:帮、织物和缝线.第6节:带耐磨性

Method of determining abrasion resistance both in the dry state and the wet state. To be read in conjunction with BS 5131-0

Methods of test for footwear and footwear materials - Uppers, textiles and threads - Abrasion resistance of shoe laces

BS 5131-2.7:1980 试验方法.第2部分:底.第7节:物理试验试样制备

Preparation of test sheets and pieces from manufactured soles or soling materials or from mouldable or vulcanizable materials. Time intervals between

Methods of test for footwear and footwear materials - Solings - The preparation of test pieces from soling materials for physical testing

ISO/TR 20572:2007 .制性能要求.附件

This Technical Report establishes the performance requirements for accessories (laces and eyelets, metal components and touch and close fasteners

Footwear - Performance requirements for components for footwear - Accessories

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。