GB/T 36516-2018 机动车净化过滤器用铁铬铝纤维丝
Fe-Cr-Al wire and fiber for automotive purification filter
YS/T 904.4-2013 铁铬铝纤维丝化学分析方法 第4部分:磷量的测定 钼蓝分光光度法
YS/T 904的本部分规定了铁路铝纤维丝中磷量的测定方法。本部分适用于铁铬铝纤维丝中磷量的测定,测定范围0.001%~0.050
Methods for chemical analysis of iron-chromium-aluminum fiber.Part 4:Determination of phosphorus content.Molybdenum blue spectrophotometry
YS/T 904.1-2013 铁铬铝纤维丝化学分析方法 第1部分:氮量的测定 惰性气体熔融热导法
YS/T 904的本部分规定了铁铬铝纤维丝中氮量的测定方法。本部分适用于铁铬铝纤维丝中氮量的测定,测定范围:0.000 5%~0.040
Methods for chemical analysis of iron-chromium-aluminum fiber.Part 1:Determination of nitrogen content.Inert gas fusion thermal conductivity method
YS/T 904.5-2013 铁铬铝纤维丝化学分析方法 第5部分:碳、硫量的测定 高频燃烧红外吸收法
YS/T 904的本部分规定了铁铬铝纤维丝中碳量和硫量的测定方法。本部分适用于铁铬铝纤维丝中碳量和硫量的测定,碳量测定范围为0.005%~0.50%,硫量测定范围为 0.000 5%~0.050
Methods for chemical analysis of iron-chromium-aluminum fiber.Part 5:Determination of carbon and sulfur content.High-frequency infrared absorption method
YS/T 904.2-2013 铁铬铝纤维丝化学分析方法 第2部分:铬、铝量的测定 电感耦合等离子体原子发射光谱法
YS/T 904的本部分规定了铁铬铝纤维丝中铬、铝量的测定方法。本部分适用于铁铬铝纤维丝中铬、铝量的测定,铬测定范围为10.00%~30.00%,铝测定范围为2.00%~10.00
Methods for chemical analysis of iron-chromium-aluminum fiber.Part 2:Determination of chromium and aluminum content.Inductively coupled plasma atomic emission spectrometry
YS/T 904.3-2013 铁铬铝纤维丝化学分析方法 第3部分:硅、锰、钛、铜、镧、铈量的测定 电感耦合等离子体原子发射光谱法
YS/T 904的本部分规定了铁铬铝纤维丝中硅、锰、钛、铜、镧、铈量的测定方法。本部分适用于铁铬铝纤维丝中硅、锰、钛、铜、镧、铈量的测定,测定范围见表1
Methods for chemical analysis of iron-chromium-aluminum fiber.Part 3:Determination of silicon、manganese、titanium、copper、lanthanum and cerium content.Inductively coupled plasma atomic emission spectrometry
DLA A-A-1451 A VALID NOTICE 2-2006 纤维丝
A-A-1451A, dated 25 September 2001, has been reviewed and determined to be valid for use in acquisition
TWINE, FIBROUS
DLA A-A-1451 A VALID NOTICE 1-2001 纤维丝
A-A-1451A, dated 28 July 1995, has been reviewed and determined to be valid for use in acquistion
TWINE, FIBROUS
DLA A-A-1451 A-1995 纤维丝
This commercial item description covers cotton wrapping twine intended for general purpose usage
TWINE, FIBROUS
ARMY DOD-F-70459 NOTICE 2-1996 木丝纤维
This notice should be filed in front DOD-F-70459(AR), dated 5 June 1984
FIBER, SHREDDED WOOD
ARMY DOD-F-70459 VALID NOTICE 1-1990 木丝纤维
DOD-F-70459(Añ), dated 5 June 1984, has been reviewed and determined to be valid for use in acquisition
FIBER, SHREDDED WOOD
ARMY DOD-F-70459-1984 木丝纤维
This specification is approved for use by all Departments and Agencies of the Department of Defense
FIBER, SHREDDED WOOD
KS C 6936-1995(2020 纤维丝带
Fiber ribbons
GOST 21600.18-1983 铬铁.铝的测定法
Настоящий стандарт устанавливает фотометрический (с хромазуролом S
Ferrochrome. Methods for the determination of total aluminium
GB/T 2904-2010 镍铬-金铁、铜-金铁低温热电偶丝
本标准规定了镍铬-金铁、铜-金铁热电偶丝的产品分类、技术要求、试验方法、检验规则、供应方式、包装及标志。 本标准适用于制造工业镍铬-金铁、铜-金铁热电偶用合金丝
Nickel-Chromium/Gold-Iron,Copper/Gold-Iron low temperature thermocouple wires
GB/T 36516-2018 机动车净化过滤器用铁铬铝纤维丝
Fe-Cr-Al wire and fiber for automotive purification filter
YS/T 904.4-2013 铁铬铝纤维丝化学分析方法 第4部分:磷量的测定 钼蓝分光光度法
YS/T 904的本部分规定了铁路铝纤维丝中磷量的测定方法。本部分适用于铁铬铝纤维丝中磷量的测定,测定范围0.001%~0.050
Methods for chemical analysis of iron-chromium-aluminum fiber.Part 4:Determination of phosphorus content.Molybdenum blue spectrophotometry
YS/T 904.1-2013 铁铬铝纤维丝化学分析方法 第1部分:氮量的测定 惰性气体熔融热导法
YS/T 904的本部分规定了铁铬铝纤维丝中氮量的测定方法。本部分适用于铁铬铝纤维丝中氮量的测定,测定范围:0.000 5%~0.040
Methods for chemical analysis of iron-chromium-aluminum fiber.Part 1:Determination of nitrogen content.Inert gas fusion thermal conductivity method
YS/T 904.5-2013 铁铬铝纤维丝化学分析方法 第5部分:碳、硫量的测定 高频燃烧红外吸收法
YS/T 904的本部分规定了铁铬铝纤维丝中碳量和硫量的测定方法。本部分适用于铁铬铝纤维丝中碳量和硫量的测定,碳量测定范围为0.005%~0.50%,硫量测定范围为 0.000 5%~0.050
Methods for chemical analysis of iron-chromium-aluminum fiber.Part 5:Determination of carbon and sulfur content.High-frequency infrared absorption method
YS/T 904.2-2013 铁铬铝纤维丝化学分析方法 第2部分:铬、铝量的测定 电感耦合等离子体原子发射光谱法
YS/T 904的本部分规定了铁铬铝纤维丝中铬、铝量的测定方法。本部分适用于铁铬铝纤维丝中铬、铝量的测定,铬测定范围为10.00%~30.00%,铝测定范围为2.00%~10.00
Methods for chemical analysis of iron-chromium-aluminum fiber.Part 2:Determination of chromium and aluminum content.Inductively coupled plasma atomic emission spectrometry
YS/T 904.3-2013 铁铬铝纤维丝化学分析方法 第3部分:硅、锰、钛、铜、镧、铈量的测定 电感耦合等离子体原子发射光谱法
YS/T 904的本部分规定了铁铬铝纤维丝中硅、锰、钛、铜、镧、铈量的测定方法。本部分适用于铁铬铝纤维丝中硅、锰、钛、铜、镧、铈量的测定,测定范围见表1
Methods for chemical analysis of iron-chromium-aluminum fiber.Part 3:Determination of silicon、manganese、titanium、copper、lanthanum and cerium content.Inductively coupled plasma atomic emission spectrometry
DLA A-A-1451 A VALID NOTICE 2-2006 纤维丝
A-A-1451A, dated 25 September 2001, has been reviewed and determined to be valid for use in acquisition
TWINE, FIBROUS
DLA A-A-1451 A VALID NOTICE 1-2001 纤维丝
A-A-1451A, dated 28 July 1995, has been reviewed and determined to be valid for use in acquistion
TWINE, FIBROUS
DLA A-A-1451 A-1995 纤维丝
This commercial item description covers cotton wrapping twine intended for general purpose usage
TWINE, FIBROUS
ARMY DOD-F-70459 NOTICE 2-1996 木丝纤维
This notice should be filed in front DOD-F-70459(AR), dated 5 June 1984
FIBER, SHREDDED WOOD
ARMY DOD-F-70459 VALID NOTICE 1-1990 木丝纤维
DOD-F-70459(Añ), dated 5 June 1984, has been reviewed and determined to be valid for use in acquisition
FIBER, SHREDDED WOOD
ARMY DOD-F-70459-1984 木丝纤维
This specification is approved for use by all Departments and Agencies of the Department of Defense
FIBER, SHREDDED WOOD
KS C 6936-1995(2020 纤维丝带
Fiber ribbons
GOST 21600.18-1983 铬铁.铝的测定法
Настоящий стандарт устанавливает фотометрический (с хромазуролом S
Ferrochrome. Methods for the determination of total aluminium
GB/T 2904-2010 镍铬-金铁、铜-金铁低温热电偶丝
本标准规定了镍铬-金铁、铜-金铁热电偶丝的产品分类、技术要求、试验方法、检验规则、供应方式、包装及标志。 本标准适用于制造工业镍铬-金铁、铜-金铁热电偶用合金丝
Nickel-Chromium/Gold-Iron,Copper/Gold-Iron low temperature thermocouple wires
编辑：北检院编辑部
