HG/T 5247-2017 单组份热固化环氧结构胶粘剂
One-component heat-curing epoxy structural adhesive
HG/T 5247~5248-2017 单组份热固化和风力发电机组叶片用环氧结构胶粘剂（2017）
One-component heat-curing and epoxy structural adhesives for wind turbine blades (2017)
FORD ESF-M2G331-A-1995 结构用热固化单组分环氧树脂胶粘剂
ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL
NAVISTAR TMS 6924-2004 VOID 结构粘合剂，环氧树脂，单组份
VOID - Structural Adhesive, Epoxy, One-Part
AS/NZS 3750.1:2008 钢结构用涂料．锈钢环氧树脂胶粘剂（双组份）
Specifies requirements for a two-component, high-build, high-solids, epoxy mastic for the protection of iron and steel against exterior atmospheric
Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel
FORD ESF-M2G295-A-2002 结构用热固化单组分环氧树脂胶粘剂*与标准FORD WSS-M99P1111-A一起使用*
ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL *TO BE USED WITH FORD WSS-M99P1111-A*
GM 9981347-1993 粘合剂，单组份，环氧树脂
Adhesive, One-Part, Epoxy
FORD ESB-M2G347-A-1990 结构用两组分室温固化或感应固化环氧树脂混合型胶粘剂
ADHESIVE, EPOXY HYBRID - TWO COMPONENT ROOM TEMPERATURE CURE OR INDUCTION CURING, STRUCTURAL
FORD ESK-M2G292-A-1994 铆紧凸缘用热固化环氧膜胶粘剂
ADHESIVE, EPOXY FILM - HEAT CURING - CLINCH FLANGE
HB 6770-1993 单组份柱面固持厌氧胶
本标准规定了单组份柱面固持厌氧胶的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于不同间隙的滑动配合零件装配固持用的单组份厌氧胶。该胶在５℃以上施工时不需加用底剂可在各金属表面固化，加用底剂时可在塑料、镀层和玻璃表面上固化
One-component cylinder-mounted anaerobic adhesive
HG/T 5248-2017 风力发电机组叶片用环氧结构胶粘剂
Epoxy structural adhesives for wind turbine blades
FORD WSB-M2G388-A-2003 结构用热固化可焊环氧树脂胶粘剂*与标准FORD WSS-M99P1111-A一起使用*
ADHESIVE, EPOXY, WELDABLE, THERMAL CURE, STRUCTURAL *TO BE USED WITH FORD WSS-M99P1111-A*
GM 9982118-1993 双组分环氧固化粘合剂
Freigabemuster, fur die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung und Konstruktion
Adhesive, Two-Part, Epoxy, Hardener Revision A [Replaced: GMNA 9985481]
SAE AMS3690B-2000 胶粘剂，环氧树脂室温固化
This specification covers a two-component compound, an epoxy resin base and a hardener, in the form of a paste
Adhesive Compound, Epoxy Room Temperature Curing
SAE AMS3690-1960 胶粘剂，环氧树脂室温固化
ADHESIVE COMPOUND, EPOXY Room Temperature Curing
HG/T 5247-2017 单组份热固化环氧结构胶粘剂
One-component heat-curing epoxy structural adhesive
HG/T 5247~5248-2017 单组份热固化和风力发电机组叶片用环氧结构胶粘剂（2017）
One-component heat-curing and epoxy structural adhesives for wind turbine blades (2017)
FORD ESF-M2G331-A-1995 结构用热固化单组分环氧树脂胶粘剂
ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL
NAVISTAR TMS 6924-2004 VOID 结构粘合剂，环氧树脂，单组份
VOID - Structural Adhesive, Epoxy, One-Part
AS/NZS 3750.1:2008 钢结构用涂料．锈钢环氧树脂胶粘剂（双组份）
Specifies requirements for a two-component, high-build, high-solids, epoxy mastic for the protection of iron and steel against exterior atmospheric
Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel
FORD ESF-M2G295-A-2002 结构用热固化单组分环氧树脂胶粘剂*与标准FORD WSS-M99P1111-A一起使用*
ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL *TO BE USED WITH FORD WSS-M99P1111-A*
GM 9981347-1993 粘合剂，单组份，环氧树脂
Adhesive, One-Part, Epoxy
FORD ESB-M2G347-A-1990 结构用两组分室温固化或感应固化环氧树脂混合型胶粘剂
ADHESIVE, EPOXY HYBRID - TWO COMPONENT ROOM TEMPERATURE CURE OR INDUCTION CURING, STRUCTURAL
FORD ESK-M2G292-A-1994 铆紧凸缘用热固化环氧膜胶粘剂
ADHESIVE, EPOXY FILM - HEAT CURING - CLINCH FLANGE
HB 6770-1993 单组份柱面固持厌氧胶
本标准规定了单组份柱面固持厌氧胶的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于不同间隙的滑动配合零件装配固持用的单组份厌氧胶。该胶在５℃以上施工时不需加用底剂可在各金属表面固化，加用底剂时可在塑料、镀层和玻璃表面上固化
One-component cylinder-mounted anaerobic adhesive
HG/T 5248-2017 风力发电机组叶片用环氧结构胶粘剂
Epoxy structural adhesives for wind turbine blades
FORD WSB-M2G388-A-2003 结构用热固化可焊环氧树脂胶粘剂*与标准FORD WSS-M99P1111-A一起使用*
ADHESIVE, EPOXY, WELDABLE, THERMAL CURE, STRUCTURAL *TO BE USED WITH FORD WSS-M99P1111-A*
GM 9982118-1993 双组分环氧固化粘合剂
Freigabemuster, fur die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung und Konstruktion
Adhesive, Two-Part, Epoxy, Hardener Revision A [Replaced: GMNA 9985481]
SAE AMS3690B-2000 胶粘剂，环氧树脂室温固化
This specification covers a two-component compound, an epoxy resin base and a hardener, in the form of a paste
Adhesive Compound, Epoxy Room Temperature Curing
SAE AMS3690-1960 胶粘剂，环氧树脂室温固化
ADHESIVE COMPOUND, EPOXY Room Temperature Curing
编辑：北检院编辑部
