铜及铜合金毛细管检测

GB/T 1531-1994 铜及铜合金毛细管

本标准规定了铜及铜合金毛细管的分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准根据用途将产品分为3级： 高级——适用于家用电冰箱、电冰柜、高精度仪表等工业部门用的铜毛细管。 较高级——适用于较高精度的仪器、仪表和电子等工业部门用的铜及铜合金毛细管

Capillary tube of copper and copper alloys

GB/T 1531-2020 铜及铜合金毛细管

本标准规定了铜及铜合金毛细管的技术要求、试验方法、检验规则和标志、包装、运输、贮存、质量证明书和订货单（或合同）内容。 本标准适用于空调、制冷设备、仪器仪表用铜及铜合金毛细管（以下简称管材

Copper and copper alloy capillary tube

GB/T 1531-2009 铜及铜合金毛细管

本标准规定了铜及铜合金毛细管（以下简称管材）的要求、试验方法、检验规则和标志、包装、运输、贮存及订货单（或合同）内容等。 本标准根据用途将产品分为2级： 高精级——适用于家用电冰箱、空调、电冰柜、高精度仪表、高精密医疗仪器等工业部门用的铜及铜合金毛细管。 普通级——适用于一般精度的仪器、仪表和

Capillary tube of copper and copper alloys

YS/T 999-2014 铜及铜合金毛细管涡流探伤方法

本标准规定了铜及铜合金毛细管的穿过式涡流探伤方法,包括:术语和定义、涡流探伤原理和方法、涡流探伤系统、人工标准缺陷样管、探伤步骤、探伤结果的评定、探伤人员的一般要求及探伤报告。本标准适用于铜及铜合金毛细管的规格范围:外径(Φ0.5~Φ6.1)×内径(Φ0.3~Φ4.45)。其他规格毛细管可参照本标准

Capillary tube of copper and copper alloy-eddy current testing method

BS 2051-1:1973(1999 工程用管件规范 第1部分：工程用铜及铜合金毛细管和压缩管件

Specification for Tube and pipe fittings for engineering purposes — Part 1 : Copper and copper alloys capillary and compression tube fittings for engineering purposes

BS 864-2:1983(1999 铜及铜合金毛细管和压缩管配件 第2部分：铜管毛细管和压缩管配件规范

Capillary and compression tube fittings of copper and copper alloy — Part 2 : Specification for capillary and compression fittings for copper tubes

ASTM B828-00 通过铜和铜合金管及配件钎焊制作毛细管连接件的标准实施规范

1.1 This practice describes a procedure for making capillary joints by soldering of copper and copper alloy tube and fittings.

1.2

Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

BS EN 12450:1999 铜和铜合金.圆铜缝毛细管

This European Standard specifies the composition, property requirements and tolerances on dimensions and form for seamless round copper capillary

Copper and copper alloys - Seamless, round copper capillary tubes

BS EN 12450:2012 铜和铜合金.缝、圆铜毛细管

Copper and copper alloys. Seamless, round copper capillary tubes

EN 12450:2012 铜和铜合金缝,圆铜毛细管

This European Standard specifies the composition, property requirements and tolerances on dimensions and on form for seamless round copper capillary

Copper and copper alloys - Seamless, round copper capillary tubes

EN 12450:1999 铜和铜合金.毛细圆铜缝管

Copper and Copper Alloys - Seamless, Round Copper Capillary Tubes

NF A51-103*NF EN 12450:2013 铜和铜合金 毛细圆铜缝管

Copper and copper alloys - Seamless, round copper capillary tubes

LST EN 12450-2013 铜和铜合金 缝圆铜毛细管

Copper and copper alloys - Seamless, round copper capillary tubes

DS/EN 12450:2012 铜和铜合金 缝圆铜毛细管

This European Standard specifies the composition, property requirements and tolerances on dimensions and on form for seamless round copper capillary

Copper and copper alloys - Seamless, round copper capillary tubes

UNE-EN 12450:2013 铜和铜合金 缝圆铜毛细管

Copper and copper alloys - Seamless, round copper capillary tubes

GB/T 1531-1994 铜及铜合金毛细管

本标准规定了铜及铜合金毛细管的分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准根据用途将产品分为3级： 高级——适用于家用电冰箱、电冰柜、高精度仪表等工业部门用的铜毛细管。 较高级——适用于较高精度的仪器、仪表和电子等工业部门用的铜及铜合金毛细管

Capillary tube of copper and copper alloys

GB/T 1531-2020 铜及铜合金毛细管

本标准规定了铜及铜合金毛细管的技术要求、试验方法、检验规则和标志、包装、运输、贮存、质量证明书和订货单（或合同）内容。 本标准适用于空调、制冷设备、仪器仪表用铜及铜合金毛细管（以下简称管材

Copper and copper alloy capillary tube

GB/T 1531-2009 铜及铜合金毛细管

本标准规定了铜及铜合金毛细管（以下简称管材）的要求、试验方法、检验规则和标志、包装、运输、贮存及订货单（或合同）内容等。 本标准根据用途将产品分为2级： 高精级——适用于家用电冰箱、空调、电冰柜、高精度仪表、高精密医疗仪器等工业部门用的铜及铜合金毛细管。 普通级——适用于一般精度的仪器、仪表和

Capillary tube of copper and copper alloys

YS/T 999-2014 铜及铜合金毛细管涡流探伤方法

本标准规定了铜及铜合金毛细管的穿过式涡流探伤方法,包括:术语和定义、涡流探伤原理和方法、涡流探伤系统、人工标准缺陷样管、探伤步骤、探伤结果的评定、探伤人员的一般要求及探伤报告。本标准适用于铜及铜合金毛细管的规格范围:外径(Φ0.5~Φ6.1)×内径(Φ0.3~Φ4.45)。其他规格毛细管可参照本标准

Capillary tube of copper and copper alloy-eddy current testing method

BS 2051-1:1973(1999 工程用管件规范 第1部分：工程用铜及铜合金毛细管和压缩管件

Specification for Tube and pipe fittings for engineering purposes — Part 1 : Copper and copper alloys capillary and compression tube fittings for engineering purposes

BS 864-2:1983(1999 铜及铜合金毛细管和压缩管配件 第2部分：铜管毛细管和压缩管配件规范

Capillary and compression tube fittings of copper and copper alloy — Part 2 : Specification for capillary and compression fittings for copper tubes

ASTM B828-00 通过铜和铜合金管及配件钎焊制作毛细管连接件的标准实施规范

1.1 This practice describes a procedure for making capillary joints by soldering of copper and copper alloy tube and fittings.

1.2

Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

BS EN 12450:1999 铜和铜合金.圆铜缝毛细管

This European Standard specifies the composition, property requirements and tolerances on dimensions and form for seamless round copper capillary

Copper and copper alloys - Seamless, round copper capillary tubes

BS EN 12450:2012 铜和铜合金.缝、圆铜毛细管

Copper and copper alloys. Seamless, round copper capillary tubes

EN 12450:2012 铜和铜合金缝,圆铜毛细管

This European Standard specifies the composition, property requirements and tolerances on dimensions and on form for seamless round copper capillary

Copper and copper alloys - Seamless, round copper capillary tubes

EN 12450:1999 铜和铜合金.毛细圆铜缝管

Copper and Copper Alloys - Seamless, Round Copper Capillary Tubes

NF A51-103*NF EN 12450:2013 铜和铜合金 毛细圆铜缝管

Copper and copper alloys - Seamless, round copper capillary tubes

LST EN 12450-2013 铜和铜合金 缝圆铜毛细管

Copper and copper alloys - Seamless, round copper capillary tubes

DS/EN 12450:2012 铜和铜合金 缝圆铜毛细管

This European Standard specifies the composition, property requirements and tolerances on dimensions and on form for seamless round copper capillary

Copper and copper alloys - Seamless, round copper capillary tubes

UNE-EN 12450:2013 铜和铜合金 缝圆铜毛细管

Copper and copper alloys - Seamless, round copper capillary tubes