再生粗骨料检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

GB/T 25177-2010 混凝土用

本标准规定了混凝土用再生粗骨料的术语和定义、分类和规格、要求、试验方法、检验规则、标志、储存和运输。 本标准适用于配制混凝土的再生粗骨料

Recycled coarse aggregate for concrete

T/JSJTQX 14-2020 混凝土用混合型

该标准技术内容主要包括两个方面,混合型再生粗骨料主要分级指标的选取和分级范围的确定。通过试验对一组普通粗骨料和二十三组混合型再生粗骨料以及由各组粗骨料浇制的混凝土的物理和力学性能进行测试。根据权重-斜率-灰色关联度分析法对骨料性能和混凝土性能之间的关联度进行计算,可得骨料吸水率、压碎指标、饱和面干

Mixed recycled coarse aggregate for concrete

T/JSJTQX 15-2020 混合型混凝土 配合比设计规程

该标准的主要技术内容为混合型再生粗骨料混凝土配合比设计中各关键参数(混合型再生粗骨料取代率、用水量、水灰比、粗细骨料用量)的确定。混合型再生粗骨料取代率和水灰比的确定通过试验浇筑一组普通混凝土和二十三组混合型再生粗骨料混凝土,使普通混凝土水灰比为0.65,混合型再生粗骨料混凝土水灰比为0.58

Specification for mix proportion design of mixed recycled coarse aggregate concrete

DS/EN 933-11/AC:2010 几何性能试验 第11部分:成分分级试验

This European Standard describes a simple method for the examination of coarse recycled aggregates for the purpose of identifying and estimating

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

DS/EN 933-11:2009 几何性能试验 第11部分:成分分级试验

This European Standard describes a simple method for the examination of coarse recycled aggregates for the purpose of identifying and estimating

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

LST EN 933-11-2009 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

LST EN 933-11-2009/AC-2010 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

OENORM EN 933-11-2021 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

prEN 933-11-2021 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

UNE-EN 933-11:2009 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

DIN EN 933-11:2021 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; German and English version prEN 933-11:2021

BS EN 933-11:2009(2010 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates Part 11 : Classification test for the constituents of coarse recycled aggregate

DIN EN 933-11:2021-04 几何性能试验第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; German and English version prEN 933-11:2021 / Note: Date of issue 2021-03-12*Intended as replacement for DIN EN 933-11 (201...

UNE-EN 933-11:2009/AC:2010 几何性能试验第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

DIN EN 933-11:2011-05 几何性能试验第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; German version EN 933-11:2009 + AC:2009 / Note: To be replaced by DIN EN 933-11 (2021-04).

GB/T 25177-2010 混凝土用

本标准规定了混凝土用再生粗骨料的术语和定义、分类和规格、要求、试验方法、检验规则、标志、储存和运输。 本标准适用于配制混凝土的再生粗骨料

Recycled coarse aggregate for concrete

T/JSJTQX 14-2020 混凝土用混合型

该标准技术内容主要包括两个方面,混合型再生粗骨料主要分级指标的选取和分级范围的确定。通过试验对一组普通粗骨料和二十三组混合型再生粗骨料以及由各组粗骨料浇制的混凝土的物理和力学性能进行测试。根据权重-斜率-灰色关联度分析法对骨料性能和混凝土性能之间的关联度进行计算,可得骨料吸水率、压碎指标、饱和面干

Mixed recycled coarse aggregate for concrete

T/JSJTQX 15-2020 混合型混凝土 配合比设计规程

该标准的主要技术内容为混合型再生粗骨料混凝土配合比设计中各关键参数(混合型再生粗骨料取代率、用水量、水灰比、粗细骨料用量)的确定。混合型再生粗骨料取代率和水灰比的确定通过试验浇筑一组普通混凝土和二十三组混合型再生粗骨料混凝土,使普通混凝土水灰比为0.65,混合型再生粗骨料混凝土水灰比为0.58

Specification for mix proportion design of mixed recycled coarse aggregate concrete

DS/EN 933-11/AC:2010 几何性能试验 第11部分:成分分级试验

This European Standard describes a simple method for the examination of coarse recycled aggregates for the purpose of identifying and estimating

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

DS/EN 933-11:2009 几何性能试验 第11部分:成分分级试验

This European Standard describes a simple method for the examination of coarse recycled aggregates for the purpose of identifying and estimating

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

LST EN 933-11-2009 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

LST EN 933-11-2009/AC-2010 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

OENORM EN 933-11-2021 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

prEN 933-11-2021 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

UNE-EN 933-11:2009 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

DIN EN 933-11:2021 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; German and English version prEN 933-11:2021

DIN EN 933-11:2011-05 几何性能试验第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; German version EN 933-11:2009 + AC:2009 / Note: To be replaced by DIN EN 933-11 (2021-04).

DIN EN 933-11:2021-04 几何性能试验第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; German and English version prEN 933-11:2021 / Note: Date of issue 2021-03-12*Intended as replacement for DIN EN 933-11 (201...

BS EN 933-11:2009(2010 几何性能试验 第11部分:成分分级试验

Tests for geometrical properties of aggregates Part 11 : Classification test for the constituents of coarse recycled aggregate

UNE-EN 933-11:2009/AC:2010 几何性能试验第11部分:成分分级试验

Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。