洁净手术室检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

ASHRAE NA-04-7-4-2004 受控区域

ABSTRACT New China standards@ the ??Construction Standard for Clean Operating Room in Hospital?? and the ??Architectural Code for Clean Operating Room

Controlled Clean Operating Room Area

GB/T 19569-2004 用空气调节机组

本标准规定了洁净手术室或其他类似的有微生物控制要求场所用空气调节机组(以下简称“空调机组”)的定义、型式和基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于直接蒸发式或冷水式或两者组合在一起的洁净手术室用空气调节机组

Air conditioning unit for clean operating room

T/SZCA 1-2020 装配式规程

本规程的主要技术内容是:1.总则;2.术语;3.基本规定;4.设计;5.材料;6.装配;7.验收与检测;8.使用维护等 1 总则  2 术语  3 部品(件)体系 4 设计  4.1 一般规定  4.2 功能空间配置及部品(件)体系设计 4.3 深化设计  4.4 BIM设计  5

Technical Specification for Assembled Clean Operating Room

UNE 85170:2016 和受控环境的行人门

Pedestrian doors for operating rooms, cleanrooms and controlled environment rooms.

ASHRAE OR-10-009-2010 污染控制策略的性能调查

INTRODUCTION Recent advances in medical technology necessitate regular reevaluation of the heating@ ventilating and air-conditioning (HVAC) needs

Performance Investigation for the Cleanroom Contamination Control Strategy in an Operating Room

VDI 2083 Blatt 5.1-2007 操作

Die Richtlinie beschreibt Erfordernisse an den Betrieb reinraumtechnischer Systeme, die im Rahmen der Qualit?tssicherung spezifiziert werden, um die

Cleanroom technology - Cleanroom operation

VDI 2083 Blatt 5.2-2008 操作 多用途服装的去污

This guideline applies to cleanroom clothing intended for repeated use. Single-use cleanroom clothing that is disposed of after use is not the subject

Cleanroom technology - Cleanroom operation - Decontamination of multiple-use cleanroom clothing

ISO 23464:2020 腈套规范

This document specifies the specification for ISO Class 4, ISO Class 5 and ISO Class 6 nitrile cleanroom gloves. It is applicable to cleanroom gloves

Nitrile cleanroom gloves — Specification

VDI 2083 Blatt 1-2022 、空气颗粒度等级、、空气颗粒度等级

Cleanroom technology, particle cleanliness classes of the air, Cleanroom technology, Particulate air cleanliness classes

GB 50333-2002 医院部建筑技规范

本规范适用于医院新建、改建、扩建的洁净手术部(室)工程

Architectural technical code for hospital clean operating department

BS ISO 23464:2020 丁腈套。规格

What is ISO 23464 about?    ISO 23464 is an international standard for nitrile cleanroom gloves that specifies the test method which

Nitrile cleanroom gloves. Specification

GB 50333-2013 医院部建筑技规范

本规范适用于医院新建、改建、扩建的洁净手术部工程的设计、施工和验收

Architectural technical code for hospital clean operating department

VDI 2083 Blatt 8.1-2009 空气的分子污染(AMC)

This guideline deals with the control and determination of chemical contamination in cleanrooms in order to protect process, product and personnel

Cleanroom technology - Molecular contamination of cleanroom air (AMC)

VDI 2083 Blatt 4.1-2006 的规划、建造和启动

This guideline describes the systematic approach for large-scale new construction projects as well as for extension, remodelling and renovation

Cleanroom technology - Planning, construction and start-up of cleanrooms

VDI 2083 Blatt 3.1-2012 空气中的计量学 监测

This guideline deals with the permanent installation-specific monitoring of individual parameters of controlled environments. The monitoring may

Cleanroom technology - Metrology in cleanroom air - Monitoring

ASHRAE NA-04-7-4-2004 受控区域

ABSTRACT New China standards@ the ??Construction Standard for Clean Operating Room in Hospital?? and the ??Architectural Code for Clean Operating Room

Controlled Clean Operating Room Area

GB/T 19569-2004 用空气调节机组

本标准规定了洁净手术室或其他类似的有微生物控制要求场所用空气调节机组(以下简称“空调机组”)的定义、型式和基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于直接蒸发式或冷水式或两者组合在一起的洁净手术室用空气调节机组

Air conditioning unit for clean operating room

T/SZCA 1-2020 装配式规程

本规程的主要技术内容是:1.总则;2.术语;3.基本规定;4.设计;5.材料;6.装配;7.验收与检测;8.使用维护等 1 总则  2 术语  3 部品(件)体系 4 设计  4.1 一般规定  4.2 功能空间配置及部品(件)体系设计 4.3 深化设计  4.4 BIM设计  5

Technical Specification for Assembled Clean Operating Room

UNE 85170:2016 和受控环境的行人门

Pedestrian doors for operating rooms, cleanrooms and controlled environment rooms.

ASHRAE OR-10-009-2010 污染控制策略的性能调查

INTRODUCTION Recent advances in medical technology necessitate regular reevaluation of the heating@ ventilating and air-conditioning (HVAC) needs

Performance Investigation for the Cleanroom Contamination Control Strategy in an Operating Room

VDI 2083 Blatt 5.1-2007 操作

Die Richtlinie beschreibt Erfordernisse an den Betrieb reinraumtechnischer Systeme, die im Rahmen der Qualit?tssicherung spezifiziert werden, um die

Cleanroom technology - Cleanroom operation

VDI 2083 Blatt 5.2-2008 操作 多用途服装的去污

This guideline applies to cleanroom clothing intended for repeated use. Single-use cleanroom clothing that is disposed of after use is not the subject

Cleanroom technology - Cleanroom operation - Decontamination of multiple-use cleanroom clothing

ISO 23464:2020 腈套规范

This document specifies the specification for ISO Class 4, ISO Class 5 and ISO Class 6 nitrile cleanroom gloves. It is applicable to cleanroom gloves

Nitrile cleanroom gloves — Specification

VDI 2083 Blatt 1-2022 、空气颗粒度等级、、空气颗粒度等级

Cleanroom technology, particle cleanliness classes of the air, Cleanroom technology, Particulate air cleanliness classes

GB 50333-2002 医院部建筑技规范

本规范适用于医院新建、改建、扩建的洁净手术部(室)工程

Architectural technical code for hospital clean operating department

BS ISO 23464:2020 丁腈套。规格

What is ISO 23464 about?    ISO 23464 is an international standard for nitrile cleanroom gloves that specifies the test method which

Nitrile cleanroom gloves. Specification

GB 50333-2013 医院部建筑技规范

本规范适用于医院新建、改建、扩建的洁净手术部工程的设计、施工和验收

Architectural technical code for hospital clean operating department

VDI 2083 Blatt 8.1-2009 空气的分子污染(AMC)

This guideline deals with the control and determination of chemical contamination in cleanrooms in order to protect process, product and personnel

Cleanroom technology - Molecular contamination of cleanroom air (AMC)

VDI 2083 Blatt 4.1-2006 的规划、建造和启动

This guideline describes the systematic approach for large-scale new construction projects as well as for extension, remodelling and renovation

Cleanroom technology - Planning, construction and start-up of cleanrooms

VDI 2083 Blatt 3.1-2012 空气中的计量学 监测

This guideline deals with the permanent installation-specific monitoring of individual parameters of controlled environments. The monitoring may

Cleanroom technology - Metrology in cleanroom air - Monitoring

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。