不锈钢及合金钢检测

SN/T 2079-2008 不锈钢及合金钢分析方法X-射线荧光光谱法

本标准规定了同时测定不锈钢及合金钢中15个元素含量的X-射线荧光光谱分析方法。 本标准适用于不锈钢及合金钢中Si、Mn等15个元素含量的测定，各元素的适用范围见表1

Method for analysis of stainless and alloy steels.X-ray fluorescence spectrometry

NAVISTAR CEMS A-37-2014 VOID 不锈钢和耐热钢及合金（包括附录）

VOID - Stainless and Heat Resisting Steels and Alloys (Includes Appendix)

SH/T 3523-2020 石油化工铬镍不锈钢、铁镍合金、镍基合金及不锈钢复合钢焊接规范

Welding specification for petrochemical chromium-nickel stainless steel, iron-nickel alloy, nickel-based alloy and stainless steel clad steel

ASTM A356/A356M-11 汽轮机铸钢,碳钢,低合金钢及不锈钢,厚壁钢的标准规范

1.1 This specification covers one grade of martensitic stainless steel and several grades of ferritic steel castings for cylinders

Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

GOST 21540-1976 不锈钢、耐热钢及合金零件加工用镶硬质合金片扩孔钻.结构及尺寸

Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Design and dimensions

GOST 21542-1976 不锈钢、耐热钢及合金零件加工用镶硬质合金的扩孔钻.结构及尺寸

Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Specifications

GOST 21545-1976 不锈钢、耐热钢及合金零件加工用整体硬质合金扩孔钻.结构及尺寸

Solid carbide counterbores for machining stainless and high-temperature steels and alloys. Specifications

GOST 21541-1976 不锈钢、耐热钢及合金零件加工用镶硬质合金刀片扩孔钻.结构及尺寸

Carbide tipped inserted brade counterbores for machining stainless and high-temperature steels and alloys. Design and dimensions

HB 7454-1997 MJ螺纹合金钢及不锈钢螺栓螺钉通用规范

本规范规定了强度等级1100MPa 及900MPa MJ螺纹合金钢及不锈钢螺栓螺钉技术要、试验方法、检验规则等内容。 　　本标准适用于强度等级1100MPa及900MPaMJ螺纹合金钢螺栓螺钉的设计、制造和验收

General specification for MJ threaded alloy steel and stainless steel bolts and screws

ASTM A1080/A1080M-19 钢 不锈钢及相关合金铸件热等静压的标准实践

1.1 This practice covers general requirements for hot isostatic pressing (HIP) of steel, stainless steel, and related alloy castings. 1.2 Units

Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings

ASTM A999/A999M-04a(2009 合金钢及不锈钢管一般要求的标准规范

1.1 This specification covers a group of general requirements that, unless otherwise specified in an individual specification, shall

Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

ASTM A999/A999M-12 合金钢及不锈钢管通用要求的标准规格

1.1 This specification covers a group of general requirements that, unless otherwise specified in an individual specification, shall

Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

ASTM A999/A999M-11 合金钢及不锈钢管一般要求的标准规格

1.1 This specification covers a group of general requirements that, unless otherwise specified in an individual specification, shall

Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

ASTM A999/A999M-13 合金钢及不锈钢管通用要求的标准规格

1.1 This specification^{1.1 This specification2 covers}

Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

SN/T 2079-2008 不锈钢及合金钢分析方法X-射线荧光光谱法

本标准规定了同时测定不锈钢及合金钢中15个元素含量的X-射线荧光光谱分析方法。 本标准适用于不锈钢及合金钢中Si、Mn等15个元素含量的测定，各元素的适用范围见表1

Method for analysis of stainless and alloy steels.X-ray fluorescence spectrometry

NAVISTAR CEMS A-37-2014 VOID 不锈钢和耐热钢及合金（包括附录）

VOID - Stainless and Heat Resisting Steels and Alloys (Includes Appendix)

SH/T 3523-2020 石油化工铬镍不锈钢、铁镍合金、镍基合金及不锈钢复合钢焊接规范

Welding specification for petrochemical chromium-nickel stainless steel, iron-nickel alloy, nickel-based alloy and stainless steel clad steel

ASTM A356/A356M-11 汽轮机铸钢,碳钢,低合金钢及不锈钢,厚壁钢的标准规范

1.1 This specification covers one grade of martensitic stainless steel and several grades of ferritic steel castings for cylinders

Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

GOST 21540-1976 不锈钢、耐热钢及合金零件加工用镶硬质合金片扩孔钻.结构及尺寸

Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Design and dimensions

GOST 21542-1976 不锈钢、耐热钢及合金零件加工用镶硬质合金的扩孔钻.结构及尺寸

Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Specifications

GOST 21545-1976 不锈钢、耐热钢及合金零件加工用整体硬质合金扩孔钻.结构及尺寸

Solid carbide counterbores for machining stainless and high-temperature steels and alloys. Specifications

GOST 21541-1976 不锈钢、耐热钢及合金零件加工用镶硬质合金刀片扩孔钻.结构及尺寸

Carbide tipped inserted brade counterbores for machining stainless and high-temperature steels and alloys. Design and dimensions

HB 7454-1997 MJ螺纹合金钢及不锈钢螺栓螺钉通用规范

本规范规定了强度等级1100MPa 及900MPa MJ螺纹合金钢及不锈钢螺栓螺钉技术要、试验方法、检验规则等内容。 　　本标准适用于强度等级1100MPa及900MPaMJ螺纹合金钢螺栓螺钉的设计、制造和验收

General specification for MJ threaded alloy steel and stainless steel bolts and screws

ASTM A1080/A1080M-19 钢 不锈钢及相关合金铸件热等静压的标准实践

1.1 This practice covers general requirements for hot isostatic pressing (HIP) of steel, stainless steel, and related alloy castings. 1.2 Units

Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings

ASTM A999/A999M-04a(2009 合金钢及不锈钢管一般要求的标准规范

1.1 This specification covers a group of general requirements that, unless otherwise specified in an individual specification, shall

Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

ASTM A999/A999M-12 合金钢及不锈钢管通用要求的标准规格

1.1 This specification covers a group of general requirements that, unless otherwise specified in an individual specification, shall

Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

ASTM A999/A999M-11 合金钢及不锈钢管一般要求的标准规格

1.1 This specification covers a group of general requirements that, unless otherwise specified in an individual specification, shall

Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

ASTM A999/A999M-13 合金钢及不锈钢管通用要求的标准规格

1.1 This specification^{1.1 This specification2 covers}

Standard Specification for General Requirements for Alloy and Stainless Steel Pipe