互感器二次压降及负荷测试检测

JJF 1619-2017 互感器二次压降及负荷测试仪校准规范

Calibration Specification for Testing Instrument of Transformer Secondary Loop Voltage Drops and Loads

JJF 2041-2023 互感器二次压降及二次负荷现场测试方法

Method for Transformer Secondary Loop Voltage Drop and Loads Field Testing

DL/T 1517-2016 二次压降及二次负荷现场测试技术规范

Secondary pressure drop and secondary load field test technical specifications

DB42/T 396-2006 电力互感器二次负荷测试检验规范

Verification Criterion of Meter for Testing Load of Transformer Secondary Circuit

DB42/T 397-2006 电压互感器二次回路压降测试仪检验规范

Verification Criterion of Meter for Testing voltage drop of voltage transformer secondary cicuit

DL/T 1152-2012 电压互感器二次回路电压降测试仪通用技术条件

本标准规定了电压互感器二次回路电压降测试仪(以下简称压降测试仪)的术语和定义，基本原理，技术要求，试验方法，检验规则，标志、包装及储存等。本标准适用于采用有线测量方式和线测量方式的压降测试仪

General technical specification of secondary loop voltage drop testers of voltage transformer

JT/T 586-2004 港口机械.负荷传感器二次仪表

Port machinery.Secondary meter for load cells

JJG(交通) 043-2004 港口机械 负荷传感器二次仪表

Port Machinery-Secondary Meter for Load Cells

JJF 1264-2010 互感器负荷箱校准规范

本规范适用于额定频率为 50 Hz 或 60 Hz, 使用环境温度为(0-40)℃的互感器负荷箱的校准

Calibration Specification for Burden Box of Instrument Transformers

IS 3156 Pt.2-1992 电压互感器 规格 第2部分：测量电压互感器（第二次修订）

Voltage transformers. Specification. Part 2: Measuring voltage transformers (Second Revision)

DL/T 1196-2012 互感器负荷箱通用技术条件

Universal specification of burden box of instrument transformer

DL/T 2112-2020 敏感负荷电压暂降控制技术导则

Technical guidelines for sensitive load voltage sag control

IEEE C57.13.3-2006 互感器二次回路及外壳接地导则

Abstract: The scope of the guide includes the grounding practices presently used and the practices that were not previously reported. Specifically

Guide for the Grounding of Instrument Transformer Secondary Circuits and Cases

IEEE C57.13.3-1983 互感器二次回路及外壳接地导则

Foreword?(This Foreword is not a part of ANSI/IEEE C57.13.3-1983@ IEEE Guide for the Grounding Instrument Transformer Secondary Circuits and Cases

Guide for the Grounding of Instrument Transformer Secondary Circuits and Cases

GB/T 5604-1985 负荷传感器试验方法

负荷传感器试验方法

Load cell test procedure

JJF 1619-2017 互感器二次压降及负荷测试仪校准规范

Calibration Specification for Testing Instrument of Transformer Secondary Loop Voltage Drops and Loads

JJF 2041-2023 互感器二次压降及二次负荷现场测试方法

Method for Transformer Secondary Loop Voltage Drop and Loads Field Testing

DL/T 1517-2016 二次压降及二次负荷现场测试技术规范

Secondary pressure drop and secondary load field test technical specifications

DB42/T 396-2006 电力互感器二次负荷测试检验规范

Verification Criterion of Meter for Testing Load of Transformer Secondary Circuit

DB42/T 397-2006 电压互感器二次回路压降测试仪检验规范

Verification Criterion of Meter for Testing voltage drop of voltage transformer secondary cicuit

DL/T 1152-2012 电压互感器二次回路电压降测试仪通用技术条件

本标准规定了电压互感器二次回路电压降测试仪(以下简称压降测试仪)的术语和定义，基本原理，技术要求，试验方法，检验规则，标志、包装及储存等。本标准适用于采用有线测量方式和线测量方式的压降测试仪

General technical specification of secondary loop voltage drop testers of voltage transformer

JT/T 586-2004 港口机械.负荷传感器二次仪表

Port machinery.Secondary meter for load cells

JJG(交通) 043-2004 港口机械 负荷传感器二次仪表

Port Machinery-Secondary Meter for Load Cells

JJF 1264-2010 互感器负荷箱校准规范

本规范适用于额定频率为 50 Hz 或 60 Hz, 使用环境温度为(0-40)℃的互感器负荷箱的校准

Calibration Specification for Burden Box of Instrument Transformers

IS 3156 Pt.2-1992 电压互感器 规格 第2部分：测量电压互感器（第二次修订）

Voltage transformers. Specification. Part 2: Measuring voltage transformers (Second Revision)

DL/T 1196-2012 互感器负荷箱通用技术条件

Universal specification of burden box of instrument transformer

DL/T 2112-2020 敏感负荷电压暂降控制技术导则

Technical guidelines for sensitive load voltage sag control

IEEE C57.13.3-2006 互感器二次回路及外壳接地导则

Abstract: The scope of the guide includes the grounding practices presently used and the practices that were not previously reported. Specifically

Guide for the Grounding of Instrument Transformer Secondary Circuits and Cases

IEEE C57.13.3-1983 互感器二次回路及外壳接地导则

Foreword?(This Foreword is not a part of ANSI/IEEE C57.13.3-1983@ IEEE Guide for the Grounding Instrument Transformer Secondary Circuits and Cases

Guide for the Grounding of Instrument Transformer Secondary Circuits and Cases

GB/T 5604-1985 负荷传感器试验方法

负荷传感器试验方法

Load cell test procedure