六氯丁二烯检测

GBZ(卫生) 32-2015 职业性氯丁二烯中毒的诊断

Diagnosis of occupational chloroprene poisoning

GBZ 32-2015 职业性氯丁二烯中毒的诊断

本标准规定了职业性氯丁二烯中毒的诊断及处理原则。本标准适用于职业性氯丁二烯中毒的诊断及处理。

Diagnosis of occupational chloroprene poisoning

GB/T 15257-2008 混合调节型氯丁二烯橡胶.CR321、CR322

本标准规定了混合调节型氯丁二烯橡胶CR321系列中CR3211、CR3212、CR3213和CR322系列中CR3221、CR3222、CR3223的技术要求、检验方法、检验规则以及包装、标志、储存、运输。 本标准适用于以氯丁二烯为单体，硫磺和调节剂丁为调节剂，经乳液聚合制得的CR3211、CR3212、CR3213、CR3221、CR3222、CR3223.

Mixed modulation chloroprene rubber CR321、CR322

GB/T 14647-2008 氯丁二烯橡胶CR121、CR122

本标准规定了硫磺调节型氯丁二烯橡胶CR121系列中CR1211、CR1212、CR1213和CR122系列中CR1221、CR1222、CR1223的要求、检验方法、检验规则以及包装、标志、储存和运输。 本标准适用于以氯丁二烯为单体，硫磺为调节剂，经乳液聚合制得的CR1211、CR1212、CR1213、CR1221、CR1222、CR1223。

Chloroprene rubber CR121、CR122

GB/T 21463-2008 氯丁二烯橡胶胶乳碱度的测定

警告：使用本标准的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关法规规定的条件。 本标准规定了用碱性乳化剂聚合而成的氯丁二烯橡胶胶乳碱度的测定方法。本标准不适用于用非离子乳化剂制备的氯丁二烯橡胶胶乳和浓缩天然乳胶，也不一定适用于除氯丁胶乳以外的其他合成乳胶。

Rubber.Polychloroprene latex.Determination of alkalinity

GB/T 21462-2008 氯丁二烯橡胶(CR).评价方法

警告：使用本标准的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关法规规定的条件。 本标准规定了评价氯丁二烯橡胶（CR）硫化特征所用的标准材料、标准试验配方、设备和操作程序以及评价应力-应变性能的方法。 本标准适用于硫磺调节型CR、硫醇调节型CR。

Evaluation procedure of chloroprene rubber(CR)

GBZ 32-2002 职业性氯丁二烯中毒诊断标准(2015年11月1日起废止)

GBZ 32-2002 职业性氯丁二烯中毒诊断标准(2015年11月1日起废止)

GB 16202-1996 车间空气中氯丁二烯卫生标准

本标准规定了氯丁二烯的最高容许浓度及其监测检验方法。 本标准适用于生产氯丁二烯和使用氯丁二烯及其制品的各类企业。

Health standard for chloroprene in the air of workplace

GB/T 16091-1995 车间空气中氯丁二烯的直接进样气相色谱测定方法

本标准规定了用癸二酸二壬酯柱气相色谱法分离测定车间空气中氯丁二烯。 本标准适用于测定氯丁橡胶生产车间空气中氯丁二烯的浓度。

Workplace air--Determination of chloroprene--Direct injection gas chromatographic method

GB 11935-89 水源水中氯丁二烯卫生检验标准方法 气相色谱法

GB/T 11935-1989 水源水中氯丁二烯卫生检验标准方法 气相色谱法

本标准规定了用气相色谱法测定水源水中的氯丁二烯。 本标准适用于测定水源水中的氯丁二烯的含量。本法最低检测量为0.5ng，最低检测浓度为0.001mg/L。

Standard method for hygienic examination of chloroprene in drinking water sources--Gas chromatography

GB 11935-1989 水源水中氯丁二烯卫生检验标准方法 气相色谱法

GB 8790-1988 职业性氯丁二烯中毒诊断标准及处理原则

氯丁二烯中毒是吸收氯丁二烯蒸气或液体所致的急性或慢性全身性疾病。急性中毒以中枢神经系统抑制和呼吸道刺激作用的表现为主。慢性中毒以肝脏损害和神经衰弱综合征为主，多数病例尚有脱发。

Diagnostic criteria and principles of management of occupational chloroprene poisoning

T/GDCKCJH 070-2022 聚合物中六氯丁二烯(HCBD)的测定 气相色谱-质谱法(GC-MS)

本文件规定了聚合物中六氯丁二烯(HCBD)的气相色谱-质谱(GC-MS)联机测定方法。

Determination of hexachloroprene (HCBD) in polymers—Gas chromatography-mass spectrometry (GC-MS)

ASTM D3542-08(2019) 桥梁预成型聚氯丁二烯弹性接头密封标准规范

Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

ASTM D2628-91(2016) 混凝土路面预成型聚氯丁二烯弹性接头密封标准规范

Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

ISO 18797-1:2016 石油 石化和天然气工业 - 通过涂料和衬里的立管的外部腐蚀保护 - 第1部分:弹性体涂层系统 - 聚氯丁二烯或Epdm

Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM

HG/T 3316-2014 氯丁二烯橡胶CR 244

本标准规定了氯丁二烯橡胶CR 244的要求，试验方法，检验规则以及标志、包装、运输和贮存。 本标准适用于以氯丁二烯为单体、松香皂为乳化剂，经低温乳液聚合制得的非硫调、非污染的氯丁二烯橡胶。

Chloroprene rubber CR 244

HG/T 3317-2014 氯丁二烯胶乳CRL 50LK

本标准规定了氯丁二烯胶乳CRL 50LK的要求，试验方法，检验规则以及标志、包装、运输和贮存。 本标准适用于以氯丁二烯为单体、阳性皂为乳化剂，经乳液聚合制得的阳离子氯丁二烯胶乳。该胶乳为高度凝胶型聚合物，中等结晶，具有氯丁二烯橡胶通性。

Chloroprene rubber latex CRL 50LK

SAE AMS 3207N-2014 氯丁二烯(CR)耐风化橡胶25-35

This specification covers a chloroprene (CR) rubber in the form of sheet, strip, tubing, and molded shapes.

Chloroprene (CR) Rubber, Weather Resistant, 25 - 35

SAE AMS 3208N-2014 不受天气影响45-55的氯丁二烯(CR)橡胶

This specification covers a chloroprene (CR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.

Chloroprene (CR) Rubber, Weather Resistant, 45 - 55

SAE AMS 3209M-2014 氯丁二烯(CR)耐风化橡胶65-75

This specification covers a chloroprene (CR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.

Chloroprene (CR) Rubber, Weather Resistant, 65 - 75

NF L17-002-2013 航空航天系列 - 氯丁二烯橡胶 (CR) - 热阻 - 硬度80 IRHD

Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD

ASTM D3542-08(2013) 桥梁预成型聚氯丁二烯弹性接头密封标准规范

Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

DIN EN 2838-2013 航空航天系列. 氯丁二烯橡胶 (CR). 热阻. 硬度70 IRHD; 德文和英文版本EN 2838-2013

Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD; German and English version EN 2838:2013

BS EN 2838-2013 航空航天系列.氯丁二烯橡胶(CR).耐热性.硬度70 IRHD(国际橡胶硬度)

Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 70 IRHD

NF L17-309-2012 航空航天系列.氯丁二烯橡胶(CR).耐热性.硬度50 IRHD(国际橡胶硬度)

Aerospace series - Chloroprene rubber (CR) -Heat resistance - Hardness 50 IRHD.

DIN EN 2838-2012 航空航天系列. 氯丁二烯橡胶 (CR). 热阻. 硬度70 IRHD; 德文和英文版本FprEN 2838-2012

Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD; German and English version FprEN 2838:2012

NF L17-308-2012 航空航天系列.氯丁二烯橡胶(CR).耐热性.硬度40 IRHD(国际橡胶硬度)

Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 40 IRHD.

DIN EN 2836-2012 航空航天系列. 氯丁二烯橡胶 (CR). 热阻. 硬度50 IRHD; 德文和英文版本EN 2836-2012

Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD; German and English version EN 2836:2012

DIN EN 2835-2012 航空航天系列. 氯丁二烯橡胶 (CR). 热阻. 硬度40 IRHD; 德文和英文版本EN 2835-2012

Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 40 IRHD; German and English version EN 2835:2012

DIN EN 2837-2012 航空航天系列. 氯丁二烯橡胶 (CR). 热阻. 硬度60 IRHD; 德文和英文版本EN 2837-2012

Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD; German and English version EN 2837:2012

BS EN 2837-2012 航空航天系列.氯丁二烯橡胶(CR).耐热性.硬度60 IRHD

Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 60 IRHD

BS EN 2835-2012 航空航天系列.氯丁二烯橡胶(CR).耐高温性.硬度40 IRHD

Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 40 IRHD

EN 2837-2012 航空航天系列.氯丁二烯橡胶(CR).耐热性.硬度60 IRHD 度60 IRHD 航空航天系列.氯丁二烯橡胶(CR).耐热性.硬度60 IRHD

This European Standard specifies the properties of chloroprene rubber (CR) 1) heat resistant, hardness 60 IRHD, for aerospace applications.

Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD

ISO 2475-2011 氯丁二烯橡胶(CR).通用类型.评价程序

Chloroprene rubber (CR) - General-purpose types - Evaluation procedure

SAE AMS 3243G-2011 55-65耐燃的氯丁二烯(CR)橡胶

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a chloroprene (CR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically for parts, such as grommets, seals, and line supports, on the firewall of aircraft or wherever flame resistance is of prime importance, but usage is not limited to such applications. Each application should be considered individually.

Chloroprene (CR) Rubber Flame Resistant, 55-65

SAE AMS 3244H-2011 65-75耐燃氯丁二烯(CR)橡胶

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a chloroprene (CR) rubber in the form of sheet, strip, tubing, extrusions and molded shapes. These products have been used typically for parts, such as grommets, seals, and line supports, on the firewall of aircraft or wherever flame resistance is of prime importance, but usage is not limited to such applications. Each application should be considered individually.

Chloroprene (CR) Rubber, Flame Resistant, 65-75

SAE AMS 3242H-2011 75-85耐风化的氯丁二烯(CR)橡胶

This specification covers a chloroprene (CR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically for parts, such as window channels, bumper pads, chafing strips, and seals, requiring resistance to weather and for use from -40 to +212 °F (-40 to +100 °C), but usage is not limited to such applications.

Chloroprene (CR) Rubber, Weather Resistant, 75-85