对苯二胺检测

GB/T 21841-2019 橡胶防老剂 N-1,3-二甲基丁基-N’-苯基对苯二胺（6PPD）

Rubber antioxidant—N-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamine（6PPD）

GB/T 33089-2016 化学试剂 N,N-二甲基对苯二胺盐酸盐

本标准规定了化学试剂N,N-二甲基对苯二胺盐酸盐的性状、规格、试验、检验规则和包装及标志。 本标准适用于化学试剂N,N-二甲基对苯二胺盐酸盐的检验。 分子式：CHN·2HCl 相对分子质量：209.10(根据2011年国际相对原子质量) CAS号：536-46-9

Chemical reagent.N,N-dimethyl-p-phenylenediamine dihydrochloride

GB/T 25789-2010 对苯二胺

本标准规定了对苯二胺的要求、采样、试验方法、检验规则以及标志、标签、包装、运输和贮存。 本标准适用于对苯二胺的产品质量控制。

ρ-Phenylenediamine

GB/T 24800.12-2009 化妆品中对苯二胺、邻苯二胺和间苯二胺的测定

本标准规定了用高效液相色谱法和气相色谱法测定化妆品中对苯二胺、邻苯二胺和间苯二胺的含量。 本标准适用于化妆品中对苯二胺、邻苯二胺和间苯二胺的测定。 本标准高效液相色谱法对苯二胺、邻苯二胺和间苯二胺的检出限均为150 μg/g，定量限均为500 μg/g;气相色谱法对苯二胺、邻苯二胺和间苯二胺的检出限均为150 μg/g，定量限均为500 μg/g。

Determination of p-phenylenediamine,o-phenylenediamine and m-phenylenediamine in cosmetics

GB/T 20646-2006 橡胶配合剂 对苯二胺(PPD)防老剂 试验方法

本标准规定了测定对笨二胺（PPD）类橡胶防老剂纯度、挥发分、灰分的试验方法。 本标准适用于对笨二酸（PPD）类像胶防老剂的测定。

Rubber compounding ingredients. p-Phenylenediamine(PPD) antioxidants. Test methods

GB/T 6609.18-2004 氧化铝化学分析方法和物理性能测定方法 N，N-二甲基对苯二胺分光光度法测定硫酸根含量

本标准规定了氧化铝中硫酸根含量的测定方法。 本标准适用于氧化铝中硫酸根含量的测定。测定范围：0.005%～0.15%。

Chemical analysis methods and determination of physical performance of alumina Determination of sulfate content-N,N-dimethyI-P-phenylenediamine spectrophotometric method

GB/T 6609.18-1986 氧化铝化学分析方法 N,N-二甲基对苯二胺光度法测定硫酸根量

本标准适用于氧化铝中硫酸根量的测定，测定范围：0.005～0.15％。

Methods for the chemical analysis of aluminium oxide--The N,N-dimethyl-P-phenylenediamine photometric method for the determination of sulfate content

T/SDQE 020-2020 泰山品质 橡胶防老剂 N-1,3-二甲基丁基 -N’-苯基对苯二胺(6PPD)

本文件规定了泰山品质橡胶防老剂 N-1,3-二甲基丁基-N'-苯基对苯二胺（以下简称“橡胶防老剂6PPD”）的技术要求、试验方法、检验规则、标志、包装、运输和贮存。由4-氨基二苯胺与甲基异丁基甲酮在催化剂存在下缩合还原而制得的橡胶防老剂6PPD。化学名称：N-1,3-二甲基丁基-N'-苯基对苯二胺分子式： C18H24N2结构式：相对分子质量：268.40 （ 按 2018年国际相对原子质量）CAS RN: 793-24-8

JIS K6220-3-2018 橡胶配料. 有机化学品. 试验方法. 第3部分:对苯二胺抗降解剂

Rubber compounding ingredients -- Organic chemicals -- Test methods -- Part 3: p-Phenylenediamine antidegradants (PPDs)

SN/T 4953-2017 皮革中对苯二胺的测定 气相色谱质谱联用法

HG/T 5258-2017 橡胶防老剂 N,N-双（1-甲基丙基）对苯二胺

ISO 11236:2017 橡胶配混成分 - 对苯二胺（PPD）抗降解剂 - 试验方法

Rubber compounding ingredients — p-Phenylenediamine antidegradants (PPDs) — Test methods

ISO 11236-2017 橡胶配混成分 - 对苯二胺（PPD）抗降解剂 - 试验方法

Rubber compounding ingredients — p-Phenylenediamine antidegradants (PPDs) — Test methods

ASTM D4937-96(2017) 通过气相色谱法测定对苯二胺抗降解剂纯度的标准测试方法

Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography

HG/T 5075-2016 橡胶防老剂 N-(1,4-二甲基戊基)-N，-苯基对苯二胺（7PPD）

HG/T 4896-2016 橡胶防老剂 N-(1-甲基庚基)-N’-苯基对苯二胺(8PPD)

HG/T 4897-2016 橡胶防老剂 N,N’-双(1,4-二甲基戊基)-对苯二胺(77PD)

HG/T 4896~4897-2016 "N-(1-甲基庚基)-N'-苯基对苯二胺(8PPD)和N,N'-双(1,4-二甲基戊基)对苯二胺(77PD) (2016)"

ASTM D4937-96(2012) 通过气相色谱法测定对苯二胺抗降解剂纯度的标准测试方法

Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography

ASTM D5666-95(2009) 高效液相色谱法测定对苯二胺抗降解剂纯度的标准试验方法

Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography

KS M ISO 11236-2007(2022) 橡胶配合剂对苯二胺（PPD）抗降解剂试验方法

Rubber compounding ingredients－p-Phenylenediamine(PPD) antidegradants－Test methods

KS M ISO 11236-2007 橡胶配合剂-p-对苯二胺防老剂.试验方法

이 규격은 고무산업에서 사용되는 다양하게 치환된 p-페닐렌디아민(PPD) 노화방지제에 적용

Rubber compounding ingredients－p-Phenylenediamine(PPD) antidegradants－Test methods

KS M ISO 11236-2007 橡胶配合剂-p-对苯二胺防老剂.试验方法

이 규격은 고무산업에서 사용되는 다양하게 치환된 p-페닐렌디아민(PPD) 노화방지제에 적용

Rubber compounding ingredients－p-Phenylenediamine(PPD) antidegradants－Test methods

KS M ISO 11236-2007(2017) 橡胶配合剂对苯二胺（PPD）抗降解剂试验方法

Rubber compounding ingredients－p-Phenylenediamine(PPD) antidegradants－Test methods

ISO 11236 Technical Corrigendum 1-2006 橡胶配合剂.p-对苯二胺抗降解剂.试验方法.技术勘误1

This standard is about Rubber compounding ingredients - p-Phenylenediamine (PPD) antidegradants - Test methods; Technical Corrigendum 1

Rubber compounding ingredients - p-Phenylenediamine (PPD) antidegradants - Test methods; Technical Corrigendum 1

ASTM D5666-95(2004)e1 高效液相色谱法测定对苯二胺抗降解剂纯度的标准试验方法

Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography

ISO 11236:2000 橡胶配合剂——对苯二胺（PPD）抗降解剂——试验方法

Rubber compounding ingredients — p-Phenylenediamine (PPD) antidegradants — Test methods

ISO 11236-2000 橡胶配合剂 p-对苯二胺防老剂 试验方法

This International Standard applies to a variety of substituted p-phenylenediamine (PPD) antidegradants used in the rubber industry. The three general classes of PPD are dialkyl, alkyl-aryl and diaryl, which are used to impart ozone resistance to rubber. The test methods of greatest significance in assessing the purity of production PPDs, and hence their suitability for use in rubber, are specified in this International Standard.

Rubber compounding ingredients - p-Phenylenediamine (PPD) antidegradants - Test methods

ASTM D5666-95(2000) 高效液相色谱法测定对苯二胺抗降解剂纯度的标准试验方法

Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography

NF T45-028-1996 橡胶配合材料.对苯二胺型防护剂.试验方法

Rubber compounding ingredients. Protection agent, paraphenylenediamine type. Test methods.

ASTM D4937-96e1 气相色谱法测定对苯二胺抗降解剂纯度的标准试验方法

Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography

ASTM D4937-96(2001) 气相色谱法测定对苯二胺抗降解剂纯度的标准试验方法

Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography

ASTM D4937-1996(2017) 采用气相色谱法测定对苯二胺抗降解剂纯度的标准试验方法

5.1x00a0;This test method is designed to assess the relative purity of production PPDs. These additives are primarily used as antiozonants for tires and other rubber or polymeric products. 5.2x00a0;Since the results of this test method are based on area normalization, it assumes that all components are eluted from the column and each component has the same detector response. Although this is not strictly true, the errors introduced are relatively small and much the same for all samples; thus, they can be ignored since the intent of the test method is to establish relative purity. 5.3x00a0;Although trace amounts of x201c;low boilersx201d; are present in production samples, they are disguised by the solvent peak when using packed columns (Procedure A). 1.1x00a0;This test method covers the determination of the purity of Class I, II, and III p-phenylenediamine (PPD) antidegradants as described in Classification D4676 by gas chromatography (GC) detection and area normalization for data reduction. 1.2x00a0;The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography

ASTM D4937-1996(2012) 用气相色谱法测定对苯二胺抗降解剂纯度的标准试验方法

This test method is designed to assess the relative purity of production PPDs. These additives are primarily used as antiozonants for tires and other rubber or polymeric products. Since the results of this test method are based on area normalization, it assumes that all components are eluted from the column and each component has the same detector response. Although this is not strictly true, the errors introduced are relatively small and much the same for all samples; thus, they can be ignored since the intent of the test method is to establish relative purity. Although trace amounts of x201C;low boilersx201D; are present in production samples, they are disguised by the solvent peak when using packed columns (Procedure A).1.1 This test method covers the determination of the purity of Class I, II, and III p-phenylenediamine (PPD) antidegradants as described in Classification D4676 by gas chromatography (GC) detection and area normalization for data reduction. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography

ASTM D5666-1995(2014) 橡胶化学抗降解剂的标准试验方法. 使用高效液相色谱法测定对苯二胺 (PPD) 抗降解剂的纯度

5.1x00a0;This test method is designed to determine the purity of p-phenylenediamine antidegradants. 5.2x00a0;Since the results of this test method are based on an integrated peak area as determined by HPLC, it is assumed that all analytes of interest are resolved from interfering peaks. 1.1x00a0;This test method covers the purity of Type I, II, and III p-phenylenediamine (PPD) antidegradants as described in Classification D4676 by high performance liquid chromatography (HPLC) using ultraviolet detection and external standard calculations. 1.2x00a0;Expertise in HPLC is necessary to the successful application of this test method. 1.3x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Chemical Antidegradants—Purity of p -Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography

ASTM D5666-1995(2000) 使用高效液相色谱法测定对苯二胺抗降解剂的纯度的标准试验方法

1.1 This test method covers the purity of Type I, II and III -phenylenediamine (PPD) antidegradants as described in Practice D4676 by high performance liquid chromatography using ultraviolet detection and external standard calculations. 1.2 Expertise in high performance liquid chromatography (HPLC) is necessary to the successful application of this test method. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography

QB/T 1863-1993 染发剂中对苯二胺的测定.气相色谱法

本标准规定了染发剂中对苯二胺的测定方法，本方法最低检测浓度为0.03mg/mLe 本标准适用于含对苯二胺为主的染发剂的测定。

PN C05067-1991 合成橡胶．二苯对苯二胺型稳定剂 （Wingstay 200） 含量的测定

Przedmiotem normy jest oznaczanie zawarto?ci stabilizatora typu dwufenylo-p-fenylenodwuamin (o nazwie handlowej Wingstay 200) w kauczukach syntetycznych butadienowo-styrehowych.

Synthetic rubber. Determination of diphenyl-p-phenylenediamine type stabilizer (Wingstay 200) content

CSN 62 1122-1989 合成原料橡胶对苯二胺含量测定

Schválení ST SEV 6221-88 doporu?ilo ministerstvo pr?myslu ?SR. Zpracovatel a oborové normaliza?ní st?edisko: V?zkumn? ústav gumárenské a plastiká?ské technologie, Gottwaldov I?O 012 254, Ing. Jan Bene?, Jana Spasová. Pracovník Federálního ??adu pro normalizaci a mě?ení: Ing. Otakar Kunc, CSc.

Synthetic raw rubbers. Determination of content of diphenyl-para-phenylene-diamine

CNS 4861-1987 橡胶抗氧化剂ＤＮＰＤ（Ｎ，N ′–二β基–对苯二胺）

本标准适用于橡胶抗氧化剂 DNPD（N,N’–二β?基–对苯二胺）。

Rubber Antioxidant DNPD (N,N'-Di-}zO-naphthyl-p-phenylenedi amine)