JB/T 10027-2010 方形角尺
本标准规定了方形角尺的型式与基本参数、要求、检验条件、检验方法、标志与包装等。 本标准适用于准确度等级为00级、0级和1级，尺寸范围从100 mm×100 mm到630 mm×630 mm的金属材料或岩石材料制造的方形角尺
Square gauge
JB/T 10027-1999 方形角尺
本标准规定了方形角尺的结构型式和尺寸，精度等级，技术要求，检测方法以及标志与包装。 本标准适用于检验金属切削机床及其他机械形状误差、位置误差用的方形角尺
Square gauge
JJG 1046-2008 方形角尺检定规程
本规程适用于方形角尺首次检定、后续检定和使用中检验
Verification Regulation of Square Gauge
TCVN 5922-1995 熟铜和铜合金.挤压圆形,方形或六角形棒材.尺寸和公差
Wrought copper and copper alloys.Extruded round, square or hexagonal bars.Dimensions and tolerances
ISO 3488:1982 锻铜和铜合金.挤压圆形、方形或六角形棒材.尺寸和公差
Wrought copper and copper alloys; Extruded round, square or hexagonal bars; Dimensions and tolerances
TCVN 5842-1994 铝和铝合金.圆形,方形和六角形棒材.形状和尺寸公差
Aluminium and aluminium alloys.Round, square and hexagonal bars.Tolerances on form and dimensions
NF E25-016:2015 固定 六角形和方形产品 外平面尺寸
Fixation - Produits hexagonaux et carrés - Dimensions des surplats extérieurs
ISO 6362-5:2001 加工铝和铝合金挤压棒/条材、管材和型材 第5部分:挤压圆形、正方形和六角形棒材 尺寸和形状公差
This part of ISO 6362 specifies the tolerances on shape and dimensions of wrought aluminium and aluminium alloy extruded round bars having diameters
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 5: Extruded round, square and hexagonal bars; Tolerances on shape and dimensions
ISO 6362-5:2012 加工铝和铝合金挤压棒/条材、管材和型材.第5部分:挤压圆形、正方形和六角形棒材.尺寸规格和形状公差
This part of ISO 6362 specifies the tolerances on dimensions and shape of the following: — wrought aluminium and aluminium alloy extruded round bars
Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 5: Round, square and hexagonal bars - Tolerances on shape and dimensions
GB/T 905-1994 冷拉圆钢、方钢、六角钢 尺寸、外形、重量及允许偏差
本标准规定了冷拉圆钢、方钢、六角钢的尺寸、外形、重量及允许偏差。 本标准适用于尺寸为3～80mm的冷拉圆钢、方钢、六角钢
Dimension, shape, weight and tolerance for cold-drawn round, square and hexagonal steels
ISO 6362-5:1991 锻铝和铝合金挤压棒/条、管与型材.管和型材.第5部分:挤压圆形、正方形和六角形条.形状和尺寸公差
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 5: extruded round, square and hexagonal bars; tolerances on form and dimensions
DIN 1022:2004 钢棒.热轧方形底部等边角钢(LS 钢).尺寸、重量和公差
The project applies to hot rolled equal flange sharp-edged angle steel
Steel bars - Hot-rolled square root equal angles (LS-steel) - Dimensions, masses and tolerances
DS 1103-7:1988 刚性平板的试验方法 尺寸、角度和形状偏差的测定
The standard establishes rules for the measurement of thickness, length and width and squareness and straightness for rigid flat sheets
Test methods for rigid flat sheets - Determination of dimensions, angular and form deviation
21/30394829 DC BS ISO 6362-5 变形铝和铝合金 挤压棒材、管材和型材 第 5 部分 圆形、方形和六角形棒材 形状和尺寸公差
BS ISO 6362-5. Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles - Part 5. Round, square and hexagonal bars. Tolerances on shape and dimensions
SIS SMS 2281-1974 机器操作用管钳子．六角形．公制系列，方头尺寸25（1 "）
Machine operated socket wrenches. Hexagon. Metric series Square drive 25(1")
JB/T 10027-2010 方形角尺
本标准规定了方形角尺的型式与基本参数、要求、检验条件、检验方法、标志与包装等。 本标准适用于准确度等级为00级、0级和1级，尺寸范围从100 mm×100 mm到630 mm×630 mm的金属材料或岩石材料制造的方形角尺
Square gauge
JB/T 10027-1999 方形角尺
本标准规定了方形角尺的结构型式和尺寸，精度等级，技术要求，检测方法以及标志与包装。 本标准适用于检验金属切削机床及其他机械形状误差、位置误差用的方形角尺
Square gauge
JJG 1046-2008 方形角尺检定规程
本规程适用于方形角尺首次检定、后续检定和使用中检验
Verification Regulation of Square Gauge
TCVN 5922-1995 熟铜和铜合金.挤压圆形,方形或六角形棒材.尺寸和公差
Wrought copper and copper alloys.Extruded round, square or hexagonal bars.Dimensions and tolerances
ISO 3488:1982 锻铜和铜合金.挤压圆形、方形或六角形棒材.尺寸和公差
Wrought copper and copper alloys; Extruded round, square or hexagonal bars; Dimensions and tolerances
TCVN 5842-1994 铝和铝合金.圆形,方形和六角形棒材.形状和尺寸公差
Aluminium and aluminium alloys.Round, square and hexagonal bars.Tolerances on form and dimensions
NF E25-016:2015 固定 六角形和方形产品 外平面尺寸
Fixation - Produits hexagonaux et carrés - Dimensions des surplats extérieurs
ISO 6362-5:2001 加工铝和铝合金挤压棒/条材、管材和型材 第5部分:挤压圆形、正方形和六角形棒材 尺寸和形状公差
This part of ISO 6362 specifies the tolerances on shape and dimensions of wrought aluminium and aluminium alloy extruded round bars having diameters
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 5: Extruded round, square and hexagonal bars; Tolerances on shape and dimensions
ISO 6362-5:2012 加工铝和铝合金挤压棒/条材、管材和型材.第5部分:挤压圆形、正方形和六角形棒材.尺寸规格和形状公差
This part of ISO 6362 specifies the tolerances on dimensions and shape of the following: — wrought aluminium and aluminium alloy extruded round bars
Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 5: Round, square and hexagonal bars - Tolerances on shape and dimensions
GB/T 905-1994 冷拉圆钢、方钢、六角钢 尺寸、外形、重量及允许偏差
本标准规定了冷拉圆钢、方钢、六角钢的尺寸、外形、重量及允许偏差。 本标准适用于尺寸为3～80mm的冷拉圆钢、方钢、六角钢
Dimension, shape, weight and tolerance for cold-drawn round, square and hexagonal steels
ISO 6362-5:1991 锻铝和铝合金挤压棒/条、管与型材.管和型材.第5部分:挤压圆形、正方形和六角形条.形状和尺寸公差
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 5: extruded round, square and hexagonal bars; tolerances on form and dimensions
DIN 1022:2004 钢棒.热轧方形底部等边角钢(LS 钢).尺寸、重量和公差
The project applies to hot rolled equal flange sharp-edged angle steel
Steel bars - Hot-rolled square root equal angles (LS-steel) - Dimensions, masses and tolerances
DS 1103-7:1988 刚性平板的试验方法 尺寸、角度和形状偏差的测定
The standard establishes rules for the measurement of thickness, length and width and squareness and straightness for rigid flat sheets
Test methods for rigid flat sheets - Determination of dimensions, angular and form deviation
21/30394829 DC BS ISO 6362-5 变形铝和铝合金 挤压棒材、管材和型材 第 5 部分 圆形、方形和六角形棒材 形状和尺寸公差
BS ISO 6362-5. Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles - Part 5. Round, square and hexagonal bars. Tolerances on shape and dimensions
SIS SMS 2281-1974 机器操作用管钳子．六角形．公制系列，方头尺寸25（1 "）
Machine operated socket wrenches. Hexagon. Metric series Square drive 25(1")
编辑：北检院编辑部
